• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.42-47
• /
• 2011

The design of road lighting is aiming illuminance and luminance requirements for road lighting. In the process, various factors associated with luminaires such as luminous efficacy, light distribution, mounting height, spacing and maintenance factor are considered. However, there has been no restriction on lighting power density. In this study, lighting power density has been comparatively analyzed through a study of related data and a result of measurements on domestic roads. And, it has been analyzed by simulation results for road in which lighting conditions are variable. In terms of the limitation on power density for road lighting, road lighting can be designed using high efficacy lighting systems for energy saving.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.2
• /
• pp.183-189
• /
• 2010

The balanced performance of dominant and non-dominant leg is very important to Taekwondo sparring. The purpose of this study was to investigate whether elite Taekwondo athletes would have balanced biomechanical performance and intra-limb coordination in executing different types of Taekwondo kicks. Twelve athletes(more than 10 year practice experience) participated in this study and performed six basic kicks(i.e., the front, roundhouse, side, back, thrashing, and turning-back kick). Results indicated no statistical difference on response time, peak kicking velocity, single limb vertical jump height, and angle-angle plot between dominant leg and non-dominant leg(p>.05). In conclusion, elite Taekwondo athletes had equivalent ability between dominant leg and non-dominant leg in performing Taekwondo kicks. This might be an advantage to elite athletes for Taekwondo sparring because they could use both leg without any restriction.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.750-755
• /
• 2005

This paper proposes a small VCM (Voice coil motor) type actuator using curved suspensions for auto-focusing and zoom motions for mobile information devices. 1'he proposed focusing actuator adopts a nontraditional type of suspension using curved beams in order to extend output displacement within small height restriction. The curved beam is similar to the leaf spring type which is usually used in optical disk drives. In addition, three different materials are considered for the curved suspension model, and Aluminum shows the best dynamic characteristics. The proposed zoom actuator does not use a suspension supporting bobbin but a moving rail and a sloper mechanism by generating rotational force at lens holder. The sensitivity of design parameters on output performance is studied using ANSYS (3D FEM tool). Experiments using a prototype of the proposed actuator model verified the analytical prediction and performance.

• KIEAE Journal
• /
• v.16 no.6
• /
• pp.57-67
• /
• 2016

Purpose: Laws and regulations of land use are enormous, and the appliance of regulations is overlapped redundantly. Therefore, there are many problems such as time consuming in the process, limiting individual property rights, and interrupting enterprises' economic activities. This study will discuss problems of redundant regulations of land use and its improvement by figuring out current regulations of land use in Gyeonggi-do, one of provinces which applies the most various regulations of land use. Method: This study reviews laws on national land-use planning system and characteristics of land-use regulation in Korea. The extent of the review is limited to "framework act on the regulation of land use" with categories of national land, urban planing, architecture, etc. Through case studies in Gyeonggi-do, the status and problems of redundant regulations of land use are defined. For example, it is overlapped in "Seoul Metropolitan Area Readjustment Planning Act", Development Restriction Zone, Paldang Special District, and so on. It is mainly referred to 2015 Gyeonggi-do land-use restriction map. Result: First, Gyeonggi-do confronts many problems related to the development restrictions and the financial increasement for environmental management by redundant regulations. The development restrictions include supplying additional land for industrial use, relocating colleges, and height limitation relating to military facilities. Second, in order to organize redundant regulations, it is required to combine similar regulations and adjust through communication system among other departments. Third, regulations should consider unique local condition of each district. Lastly, efficient application of regulations is necessary so as to maximize the function of land, protect individual property rights, and stimulate local development.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.415-422
• /
• 2010

Two leaf lettuces, chicory, endive, edible chrysanthemum, and pak-choi were hydroponically cultured under root restricted conditions in a deep flow technique system and their growth and nutritional values were investigated. Cylindrical plastic tubes with 100 mm height and diameters of 20, 25 or 30 mm were used for root restriction. Growth of all species was retarded by 25-95% as the roots zone was restricted. Pak-choi and edible chrysanthemum showed greater reduction in growth as compared with chicory and endive. Percent dry matter, C/N ratio, and contents of total ascorbic acid and total anthocyanin increased in the root restricted treatments. Contents of P and K decreased in the root restricted treatments, while contents of Mg, Fe, Mn, and Zn were not consistent among the tested species. Optimized root volumes to improve the nutritional values and to reduce the growth retardation varied depending on species of leafy vegetables. Tubes of ${\Phi}25mm{\times}100mm$ and ${\Phi}30mm{\times}100mm$ were suitable for chicory, endive and lettuce, and edible chrysanthemum and pak-choi, respectively. Results indicate that nutritional values of hydroponically-cultured leafy vegetables can be improved by root restriction.

• Structural Engineering and Mechanics
• /
• v.62 no.2
• /
• pp.209-224
• /
• 2017

Elevated water tanks are considered as important structures due to its post-earthquake requirements. Elevated water tank on reinforced concrete frame staging is widely used in India. Different response reduction factors depending on ductility of frame members are used in seismic design of frame staging. The study on appropriateness of response reduction factor for reinforced concrete tank staging is sparse in literature. In the present paper a systematic study on estimation of key components of response reduction factors is presented. By considering the various combinations of tank capacity, height of staging, seismic design level and design response reduction factors, forty-eight analytical models are developed and designed using relevant Indian codes. The minimum specified design cross section of column as per Indian code is found to be sufficient to accommodate the design steel. The strength factor and ductility factor are estimated using results of nonlinear static pushover analysis. It was observed that for seismic design category 'high' the strength factor has lesser contribution than ductility factor, whereas, opposite trend is observed for seismic design category 'low'. Further, the effects of staging height and tank capacity on strength and ductility factors for two different seismic design categories are studied. For both seismic design categories, the response reduction factors obtained from the nonlinear static analysis is higher than the code specified response reduction factors. The minimum dimension restriction of column is observed as key parameter in achieving the desired performance of the elevated water tank on frame staging.

• Korean Journal of Family Medicine
• /
• v.39 no.6
• /
• pp.355-359
• /
• 2018

Background: Body image is associated with the perception of people on themselves. Influencing factors are generated internally and/or externally. The most common issue pertaining to body image is body weight and weight loss. This study aimed to determine the association between body weight perception and weight loss practices among college students. Methods: A cross-sectional study was conducted involving 297 college students from private nursing colleges in the state of Kelantan, Malaysia. A self-administered questionnaire was used to assess sociodemographic characteristics, body weight perception, and weight loss methods. Weight and height were measured, and body mass index (BMI) was calculated based on weight and height measurement. The World Health Organization BMI cutoffs were applied in the study. Results: More than half (54.2%) of college students perceived their weight correctly as per actual measured BMI. A total of 51.5% of participants had tried various methods to reduce their weight. Body weight perception is associated with weight loss practices (odds ratio, 0.31; 95% confidence interval, 0.19-0.50; P<0.001) adjusted for sex, marital status, and status of having obese family members. Those who had correct body weight perception were less likely to engage in weight loss practice. Food intake restriction (42.4%) is the most popular weight reduction method among students in nursing colleges. Over a quarter of the participants chose physical exercise (25.3%) to reduce their weight, and a small number engaged in unhealthy weight loss practices. Conclusion: Body weight perception is an important factor that influences the practice to reduce weight especially among young adult group and college students.

• Korean Journal of Weed Science
• /
• v.9 no.3
• /
• pp.177-182
• /
• 1989

The plant height, shoot numbers and dry matter weight in both bulrush and rice were increased by high level of nitrogen fertilizer and especially the dry matter weights in both species were sharply increased by high level of nitrogen fertilizer. The plant height, dry matter weight in rice, and shoot, and dry matter weight in bulrush were increased by high level of phosphorus fertilizer. The deficient symptom disappeared with change of low level into high level phosphorus in rice. The plant height, dry matter weight and shoot numbers in rice and bulrush were increased by high level of potassium fertilizer. In the inter-specific competition in bulrush according to various water levels, the plant heights in both species elongated longer with deep water levels, and the plant height and dry matter weight in bulrush were more sharply decreased than in rice by deep water levels. The shoot numbers and dry matter weight were critically dropped above 6-8 cm water level. In case of the shoot numbers for light source, in both species were more decreased in mixed culture than each monoculture. The exserted shoot length and weight in bulrush were larger than those in rice. The shaded shoot dry weight was more decreased in mixed culture than in each monoculture, and the decrement was larger in bulrush than in rice.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.1
• /
• pp.11-19
• /
• 2008

This paper proposes small VCM(voice coil motor) type, auto-focusing and zoom actuators for mobile information devices. In order to meet the large output displacement within small height restriction, the proposed auto-focusing actuator adopts curved suspensions, which are similar to a leaf-spring type suspension of optical disk drives. The sensitivity of design parameters on output displacement and dynamic performance is implemented using ANSYS (3D FEM tool) to determine the optimal geometry and stiffness of the curved suspensions. This paper also investigates a new zoom actuator without a suspension supporting a bobbin. The zoom actuator uses a moving rail and a stoper mechanism by generating rotational force at lens holder. Magnetic flux density of the zoom actuator are calculated by both the FEM and permeance method. Experiments using prototypes of the proposed focusing and zoom models show that both actuators meet the required displacement and performance.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.4
• /
• pp.166-172
• /
• 2021

Obstacle Limitation Surfaces (OLS) are set to protect a certain amount of airspace to limit objects, such as building, other structures, penetrating OLS for safety and regularity of aircraft operations in the vicinity of aerodromes. However, many civil petitions have been raising for effective utilization of lands and permission of building construction which penetrating OLS. While Republic of Korea are limiting installation of penetrating objects based on the National law of airport facilities, such objects are possibly permitted, only if, the possible risks coming from objects are acceptable or negligible in terms of safety and regularity in aircraft operations through the evaluation process, called as an aeronautical study. However, many countries are currently applying their own criteria, processes resulting in failing secure reliable results in aeronautical study. This research aims to establish the framework on criteria, process, and methodologies how the aeronautical study works including work flows between many stakeholder and responsibilities to be specified in national regulation system.