• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.6
• /
• pp.702-708
• /
• 2002

Although Umboniunm thomasi is one of marine mollusc (Archaeogastropoda: Trochidae) inhabiting the sands in the intertidal zone of the west coast of Korea, aspects of its reproductive biology are still not too well known. Reproductive cycle, gametogenesis, and first sexual maturity of U. thomasi collected at the west coast of Buan-gun, Jeollabuk-do, Korea were investigated monthly from January to December 1999. U. thomasi was dioecious, and an oviparous. The gonad was placed in the rear of the flesh part in the spiral shell. The external colors of the ripe ovary and testis appeared to be green and milk-white or yellowish white, respectively. Meat weigh rate peaked in July ($37.5\%$). And then the value sharply decreased in September ($28.3\%$), thereafter, gradually increased in November ($31.7\%$). Fully ripe oocytes were approximately 100$\~$110 $/mu$m in diameter, and their cytoplasm contained a great number of yolk Branules. Based on the monthly changes of the Bonadal development, gametogenesis, and meat weight rate, the reproductive cycle of U. thomasi could be devided into five successive stages: early active (November to April), late active (February to May), ripe (April to August), spawning (July to October), and recovery (September to February). Gonadal development and spawning were closely related to the seawater temperature, the main spawning occurred in September when the temperature reached above 24.2$^{\circ}C$. Individuals of 4.4 mm and less in shell height could not take part in reproduction in both sexes. Percentages of first sexual maturity of female and male shells ranging from 5.5 to 6.4 mm were $55.0\%$ and $61.9\%$, respectively, and $100\%$ of those over 7.5 mm in shell heights in both sexes participated in the reproduction.

• Restorative Dentistry and Endodontics
• /
• v.29 no.2
• /
• pp.177-184
• /
• 2004

Objectives : This study investigated the hypothesis that increasing light-curing time would leave the oxygen-inhibited layer (OIL) of the adhesive thinner, and in turn, result in lower shear bond strength (SBS) than those obtained by the routine curing procedures. Methods：120 human extracted posterior teeth were randomly divided into three groups for bonding with three adhesives：All Bond 2/sup (R)/, One Step/sup (R)/, and Adper Prompt/sup (R)/. They were subsequently divided into four subgourps with different light-curing time (10, 20, 30 and 60s). The assigned adhesives were applied on superficial occlusal dentin according to the manufacturer's instructions and cured with one of the four curing times. Composite resin cylinder, 2.35㎜ in diameter, were built on the cured adhesive and light-cured for 40s. SBS were measured after 24h from the bonding using a universal testing machine (crosshead speed 1.0 ㎜/min). The relative thickness of the OIL and the degree of conversion (DC) were determined from the adhesive on a slide glass using FT-NIR in an absorbance mode. Data were analysed with One-way ANOVA and Duncan's multiple test (p〈0.05), Results：With increasing cure time, although there were no significant difference in th SBS of One-step and Adper Prompt (p〉0.05), those of All Bond 2 decreased significantly (p〈0.05). The relative thicknesses of the OIL on each adhesive were not affected by the cure time (p〉0.05). Although the DC of All-Bond 2 were statistically not different with increasing cure time (p〉0.05), those of One-Step and Adper Prompt showed an increasing trends with increasing cure time (p〈0.05). Conclusions：Increasing light-curing time did not affect on the relative thickness of the OIL of the adhesives, and in turn, on the SBS to dentin.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.1
• /
• pp.29-38
• /
• 2012

This study was carried out to compare the agronomic characteristics, forage yield, and feed value of nine sorghum ${\times}$ sudangrass hybrids at paddy field cultivation. The nine recommended sorghum ${\times}$ sudangrass hybrids used in this study were P877F, Cow pow, Turbo gold, Maxi graze, Jumbo, G7, Sweet home, Honey chew BMR and Green star. Plant height, leaf number, stem diameter, and stem hardness were higher in Jumbo than other varieties (P<0.01). Sugar content (brix) was higher in order of P877F > Sweet home > maxi graze > Green star > Cow pow > G7 (P<0.01). Fresh (86,199kg/ha) and dry matter yield (16,206 kg/ha) of Jumbo were higher than other varieties (P<0.01). Crude protein was the highest in Maxi graze (6.5%), but crude fat was the highest in Honey chew BMR as 2.1% (P<0.01). NDF and ADF of Jumbo and G7 were higher than other varieties (P<0.01). TDN was higher in order of Maxi graze > Sweet home > P877F > Honey chew BMR > Green star, but no significant differences were found among the varieties. Minerals were the highest in Cow pow (15,020.5 mg/kg), and Sweet home (6,222.6 mg/kg) was the lowest as compared to other varieties (P<0.01). Total amino acids were higher in order of Maxi graze > Sweet home > Turbo gold > Honey chew BMR > Jumbo (P<0.01). Crude protein yield and crude fat yield were the highest in Turbo gold (814.6 kg/ha) and Honey chew BMR (309.8kg/ha), respectively (P<0.01). Mineral yield was the highest in Cow pow as 207.6 kg/ha (P<0.01). Amino acid yield (592.2 kg/ha) and TDN yield (10,194 kg/ha) were the highest in Sweet home. Based on the above results, sorghum ${\times}$ sudangrass hybrid varieties should be selected on the basis of the purpose of use. Because, each varieties showed various growth characteristics and nutrition yield (protein, fat, mineral, amino acid, TDN).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.1
• /
• pp.15-28
• /
• 2012

This study was carried out to know adaptability and growth characteristics, yield, chemical compositions and nutrition yield of corn hybrids for silage at paddy field. The field experiments were conducted at Sangju province for one year (2009). The experimental design was arranged in a randomized block design with three replication. The treatments consisted of eleven corn hybrids. The planting date was on 1 May and harvested at 24 August. Stem diameter, stem hardness and number of ear were higher in P32P75 than other varieties. Ear height, dead leaf and green degree were highest in $NC^+$7117, but number of root system and Brix ($B^{\circ}$) were higher in P3394 than other varieties. Crude protein and crude fat (EE) were highest in P32K61 and P31P41, respectively (P<0.01). NDF and ADF were highest in KPO and KIO, respectively, but no significant differences were found among the varieties. Total mineral contents were the highest in Kwangpyongok (9,775 mg/kg), and P3394 (6,651 mg/kg) was the lowest as compared to other varieties (P<0.01). Crude protein yield, crude fat yield and mineral yield were highest in P3156, P31P41 and KPO, respectively (P<0.01). Total composition amino acid and total fatty acid were the highest in P32K61 and KIO, respectively (P<0.01). Yields of crude protein, fatty acid, composition amino acid and TDN were the highest in P3156 (P<0.01). But yields of crude protein and mineral were the highest in P31P41 and KPO, respectively (P<0.01). Total digestible nutrient (TDN) was higher in order of P3156 > $NC^+$7117 > P31N27 > KPO > P32K61 > P32T83 > P32P75 > P31P41 > P3394 > P32W86 > KIO. Based on the above results, corn hybrid varieties could be recommended in P3156, NC+7117 and P31N27 for growth characteristics, quantitative production and nutrition yield.

• Horticultural Science & Technology
• /
• v.29 no.1
• /
• pp.16-22
• /
• 2011

In developing soil wetting agent using polyoxyethylene nonylphenyl ether (PNE) and polyoxyethylene castor oil (1:1; v/v), the effect of application rates on changes in concentration of PNE, initial wetting of peatmoss + perlite (7:3) medium, and growth of hot pepper (Capsicum annuum L. 'Knockwang') plug seedlings were investigated. The elevation of application rates of wetting agent increased the amount of water retained by the root media. The treatment of 2.5 $mL{\cdot}L^{-1}$ showed similar water retention to + control ($AquaGro^L$ 3.0 $mL{\cdot}L^{-1}$). Most of the liquid wetting agent (LWA) incorporated during the medium formulation leached out in the first and second irrigation, then it decreased gradually until 10 times in irrigation. In investigation of the influence of LWA on position of water infiltrating into root media, the vertical water movements in treatments of 0.5, 1.0, and 1.5 $mL{\cdot}L^{-1}$ were much faster than those in 0.0 $mL{\cdot}L^{-1}$ (-control), but relative speed of water movement decreased by the elevation in application rate of LWA to 2.0 or 2.5 $mL{\cdot}L^{-1}$. The evaporative water loss of root media that to contained various rate of LWA and irrigated to reach container capacity was the fastest in -control among the treatments and it delayed as the application rate of LWA was elevated. The plant height of 22.2 cm in 0.5 $mL{\cdot}L^{-1}$ and stem diameter of 3.26 mm in 1.0 $mL{\cdot}L^{-1}$ were the highest among the treatments tested. The treatment of 1.0 $mL{\cdot}L^{-1}$ also had the heaviest fresh and dry weights such among treatments tested as 3.08 g and 0.861 g per plant, respectively. The elevated application rate over than 1.5 $mL{\cdot}L^{-1}$ resulted in decreased seedling growth. The results mentioned above indicate that optimum application rate of LWA is 1.0 $mL{\cdot}L^{-1}$.

• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.43-54
• /
• 2001

Genetic differentiation of populations is resulted from the environmental and the genetic effects, and the interactions between them. Whereas, the major factors influencing to the genetic differentiation within populations are the gene flow induced by seed or pollen dispersial, the microsite heterogeneity, and the density-dependent distribution of individuals. For the purpose of studying spatial genetic structure and the distribution pattern of Korean pines(Pinus koraiensis), we set up one $100{\times}100m$ plot at a Korean pine stand in Quercus mongolica community on Mt. Jumbong in Korea. To estimate the coefficient of spatial autocorrelation as Moran's index and an analogue, simple block distance, isozyme markers were analyzed in 325 Korean pines. For 11 polymorphic loci observed in 9 enzyme systems, the average percentage of polymorphic loci, the observed and expected heterozygocity were 72.2% 0.200, and 0.251, respectively. It was revealed the excess of homozygotes was observed in the plot, which suggests that here may be more number of consanguineous trees than expected. On the basis of isozyme genotypes observed in this study, 325 trees were classified into 147 groups in which the maximum number of trees for one group was 34. From the distance class of 24-32m, the genetic heterogeneity began to increase. The variation of simple block distance against the growth performance by tree height and diameter also showed the same trend at 24~32m class. According to high fixation index(F=0.204), the spatial genetic structure within a stand, the analysis of the growth performance, and the distribution patterns of identical genotypes, we inferred that the genetic structure of a Korean pine stand in Mt. Jumbong has been maintained rather density-dependent mechanism than the gene flow, such as the pollen dispersial or the heavy input of seeds following the forest gaps. The genetic patchy size was determined between 24~32m, which suggests that the selection of individuals for the ex situ conservation of Korean pine in Mt. Jumbong may be desirable to be made with the spatial distance over 37 meters between trees.

• Journal of Radiation Industry
• /
• v.9 no.2
• /
• pp.85-90
• /
• 2015

Purpose: Time of operation has been reduced and accuracy of operation has been improved since C-arm, which offer real-time image of patient, was introduced in operation room. However, because of the contamination of patient, C-arm could not be used more appropriately. Therefore, this study is to know factors of controlling exposure dose, image quality and the exposed dose of health professional in operation room. Materials and methods: Height of Wilson frame (bed for operation) was fixed at 130 cm. Then, Model 76-2 Phantom, which was set by assembling manual of Fluke Company, was set on the bed. Head/Spine Fluoroscopy AEC mode was set for exposure condition. According to detector size of C-arm, the absorbed dose per min was measured in the 7 steps OFD (cm) from 10 cm to 40 cm (10, 15, 20, 25, 30, 35, 40 cm). In each step of OFD, the absorbed dose per min of same diameter of collimation was measured. Moreover, using Nero MAX Model 8000, exposure dose per min was measured according to 3 step of distance from detector (20 cm, 60 cm, 100 cm). Finally, resolution was measured by CDRH Disc Phantom and magnification of each OFD was measured by aluminum stick bar. Result: According to detector size of C-arm, difference of absorbed dose shows that the dose of 20 cm OFD is 1.750 times higher than the dose of 40 cm OFD. It means that the C-arm, which has smaller size of detector, shows the bigger difference of absorbed dose per min (p<0.05). In the difference of absorbed dose in the same step of OFD (from 20 cm to 40 cm), the absorbed dose of 9 inch detect or C-arm was 1.370 times higher than 12 inch' s (p<0.05). When OFD was set to 20 cm OFD, the absorbed dose of non-collimation case was approximately 0.816 times lower than the absorbed dose of collimation cases (p<0.05). When the distance was 20 cm from detector, exposed does includes first-ray and scatter-ray. When the distance was 60 cm and 100 cm from detector, exposed does includes just scatter-ray. So, there was the 2.200 times difference of absorbed does. Finally, when OFD was increased, spatial resolution was 4 to 5 step was increased. However, low contrast resolution was not relative. Moreover, there was 1.363 times difference of magnification (p<0.05). Conclusion: When C-Arm is used, avoiding contamination of patient is more important factor than reducing exposed dose of health professional in operation room. Just controlling exposure time is just way to reduce the exposed does of workers. However, in the case, non-probability influence could be occurred. Therefore, this study proved that the exposed dose will be reduced if the factors such as using small detector size of C-arm, setting OFD from 20 cm to 25 cm and non-collimating. Moreover, dose management of C-arm in the non-interesting area will be considered additionally.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.429-437
• /
• 2019

This study was conducted to examine the effect of humidification and shading during cutting propagation on growth and development of strawberry (Fragaria x ananassa Duch.) 'Maehyang' plants at a propagation stage. The runner cuttings were stuck on Nov. 23, 2017 in propagation benches set in a Venlo-type glasshouse. Four shading treatments, no shading (control, C), 55% shading with white lawn (W55), 55% black shading net (B55), or 100% black plastic film (B100) with either an intermittent fog system (H) or without fog system. The shading and fog systems were removed 2 weeks after sticking of strawberry cuttings. A nutrient solution for strawberry, which was developed by Yamazaki, was supplied once a day with electrical conductivity (EC) $1.6dS{\cdot}m^{-1}$ and pH 5.8. Growth parameters such as plant height, longest root, crown diameter, leaf chlorophyll, leaf area and fresh and dry weight were measured at 7 days and 26 days after sticking. There was no significant difference in growth of above-aerial part of strawberry. The overall growth of the strawberry roots was better grew by providing fog than that not provide fog. The root fresh weight and root dry weight after 26 days after sticking of strawberry cutting was the best in the treatment that provided fog system without shading (CH). The longest root after 26 days after sticking of strawberry cutting was the best in the treatments that provided fog system with either 55% white lawn (W55H) and 55% black shading net (B55H). These results suggest that morphogenesis of these plants were affected by humidification and shading types. In a broader perspective, these results can be used to optimize studies of other crops grown from cuttings.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1130-1136
• /
• 2011

This study was carried out to determine the effects of pig slurry on growth of potato (Solanum tuberosum L. cv. Dejima), soil chemistry properties and infiltration water quality in volcanic ash soil and non-volcanic ash soil of Jeju. Fertilization of liquid pig manure was based on nitrogen. In volcanic ash soil and non-volcanic ash soil, there was no difference in the height and diameter of stems in chemical fertilizer and liquid pig manure application treatments. Also yields of potatoes were no significantly difference in chemical fertilizer and liquid pig manure application treatments. pH in all soil was increased by application of liquid pig manure compared to the chemical fertilizer plot. Contents of exchangeable K in all soil were accumulated excessively by fertilization of pig manure 100% compared to the chemical fertilizer 100%. But there was no difference between the chemical fertilizer 50%+liquid pig manure 50% and chemical fertilizer 100%. No difference between the chemical fertilizer and liquid pig manure was observed in available phosphate, exchangeable Ca and Mg. $NO_3$-N concentration of infiltration water sample collected at 70cm of soil depth was lower non-fertilizer than chemical fertilizer and liquid pig manure application treatments. In volcanic ash soil, the $NO_3$-N concentration of infiltration water was decreased from early, except liquid manure 100%. In non volcanic ash soil, the $NO_3$-N concentration of infiltration water increased until October 8, but then was reduced. In all soils, $NO_3$-N concentration of infiltration water was higher in the liquid manure 100% than those in the chemical fertilizer 100% and chemical fertilizer 50%+liquid pig manure 50%, but there were no differences. In conclusion, the growth of potato, fertilization of soil and $NO_3$-N content of infiltration water were not different between chemical 50%+liquid pig manure 50% and chemical 100% plot. So, liquid pig manure could be substituted for some amount of chemical fertilizer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.858-863
• /
• 2010

The blueberry farming requires the soil condition of well-drainage, pH of 4.5 to 5.2, and high in organic matters for stable growth and development. Most of soil type of cultivated land in Korea, however, belongs to alkaline soils with low organic matter content and poor drainage. Therefore, the blueberry farmers use peat moss heavily to improve the soil condition, but the guideline on the effective and economic ratio of peat moss is not established yet. This study was performed to determine the cost effective peat moss ratio for amending soils, and to investigate the feasibility of using sawdust and coco peat as soil amendments. Peat moss, coco peat and sawdust are mixed with soil at the ratio of 0, 12.5, 50 and 100% (v/v). Among 3 organic materials with various mixture ratios, the pH of soil was the lowest in 100% peat moss and sawdust mixtures (pH 3.67 and pH 3.73, respectively), followed by pH 5.30 at 50% peat moss. The soil organic matter content are directly proportional to the mixture ratios in all three organic materials and the same trend was observed in the variation of content of exchangeable potassium in the coco peat treatments. On the contrary, the content of available phosphate, exchangeable calcium and magnesium decreased with increasing the ratio of organic materials. The nitrogen content in the leaves decreased as increasing the ratio of peat moss and coco peat in soil, but not of sawdust. The content of phosphate decreased but potassium increased as the ratio of sawdust and coco peat increased. There was no clear difference in the contents of magnesium and calcium among 3 organic materials. The plant height, stem diameter and dry weight of blueberry plants were the highest in 50 % peat moss, followed by 12.5% peat moss and 12.5% coco peat. The plants in 100% peat moss showed very poor growth. It can be concluded that peatmoss, when applied and managed appropriately, will be a good material for improving soil condition as well as securing desirable growth for blueberry. Upon coupling economic aspect, the optimum mixing ratio of peatmoss for blueberry farming is approximately 25-50%.