• Journal of Bio-Environment Control
• /
• v.10 no.1
• /
• pp.55-60
• /
• 2001

To investigate the effect of red light (R) and far-red light(FR) on controlling the growth of tomato transplants, height, length of 1st internode, and stem diameter of plant were measured every 12 days during 24 days of light treatment. At the end of experiment, fresh and dry weights of roots and shoots were measured. Generally, it was shown that the height of plant was suppressed by the treatment of FR. However, the effect of light-treatment time (10 or 20 min) on plant height was not significant. Stem diameter of the plant treated with R was greater than that of the plant treated with FR or the control. Dry weight ratio of shoot to root of the plant treated with R was smaller that of the plant treated with FR. R was more effective than the control, which was more effective than FR, in making the transplant compact.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.4
• /
• pp.524-533
• /
• 2021

Objective : When treating high-positioned anterior communicating artery (ACoA) aneurysms, pterional-transsylvian and interhemispheric approaches are both viable options, yet comparative studies of these two surgical approaches are rare. Accordingly, this retrospective study investigated the surgical results of both approaches. Methods : Twenty-four patients underwent a pterional approach (n=11) or interhemispheric approach (n=13), including a unilateral low anterior interhemispheric approach or bifrontal interhemispheric approach, for high-positioned ACoA aneurysms with an aneurysm dome height >15 mm and aneurysm neck height >10 mm both measured from the level of the anterior clinoid process. The clinical and radiological data were reviewed to investigate the surgical results and risk factors of incomplete clipping. Results : The pterional patient group showed a significantly higher incidence of incomplete clipping than the interhemispheric patient group (p=0.031). Four patients (36.4%) who underwent a pterional approach showed a postclipping aneurysm remnant, whereas all the patients who experienced an interhemispheric approach showed complete clipping. In one case, the aneurysm remnant was obliterated by coiling, while follow-up of the other three cases showed the remnants remained limited to the aneurysm base. A multivariate analysis revealed that a pterional approach for a large aneurysm with a diameter >8 mm presented a statistically significant risk factor for incomplete clipping. Conclusion : For high-positioned ACoA aneurysms with a dome height >15 mm and neck height >10 mm above the level of the anterior clinoid process, a large aneurysm with a diameter >8 mm can be clipped more completely via an interhemispheric approach than via a pterional approach.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.206-206
• /
• 2017

Sorghum is a crop with a various plant height depending on the planting density. If the height exceeds 1.8m, which is the harvestable height of the combine, loss is caused by clogging of the installation, entrance of the threshing section and the threshing section. The purpose of this study is to set the planting distance and number of plants per hill suitable for combine harvesting as the plant length does not exceed 1.8m. The experimental variety was Nampungchal. The experiment design was a split-plot design with three replications. The treatments were as follow: Main-plot were 1 and 2 plants as number of plants per hill and sub-plots were $60{\times}20cm$ (practice), $70{\times}15$, 20, 25, 30 cm as planting distance. The amount of nitrogen, phosphate and potassium fertilization were 100, 70, $80kg\;ha^{-1}$. Data were collected: (1) grain yield: weight of grain in $kg\;ha^{-1}$, (2) 1000 grain weight: average weight of 1000 grain, (3) plant height: distance from soil to top of panicle, (4) ear length: distance from top of stem to top of ear in cm, (5) stem diameter: diameter of second internode, (6) tiller number per hill. Analyses of variance were performed using R version 3.3.1(https://www. r- project. org). The Duncan's multiple range test(DMR) was used to separate treatment means at P < 0.05. As number of plants per hill increased, plant height and yield increased and tiller number decreased. As planting distance increased, plant height and yield decreased and tiller number increased. At 1 plant per hill, the plant height did not exceed 1.8m at all planting distance. At 2 plants per hill, the plant height did not exceed 1.8m from the planting distance of $70{\times}25cm$. At 1 plant per hill, the tiller number increased to 0.23, 0.27, 0.60 and 0.70 as the planting distance increased to $70{\times}15$, 20, 25 and 30 cm, respectively. At 2 plants per hill, the tiller number increased to 0.03, 0.03, 0.14 and 0.40 as the planting distance increased to $70{\times}15$, 20, 25 and 30 cm, respectively. At 1 plant per hill, the yield decreased to 6030, 4280, 3400 and $3230kg\;ha^{-1}$ as the planting distance increased. At 2 plant per hill, the yield decreased to 7850, 5770, 5720 and $4960kg\;ha^{-1}$ as the planting distance increased. We recommend that the optimum number of plants per hill and planting distance is 2 and $70{\times}25cm$ suitable for combine harvesting.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.1
• /
• pp.1-6
• /
• 2007

Objective : The purpose of this study is to determine the factors that have effects on the neurological deficit in the patients with thoracolumbar fracture. Methods : Forty-eight patients were included. Cause of injury, type of injury, time interval, combined injury, kyphotic angle, spinal canal compromise, sagittal diameter, the most narrow sagittal diameter, transverse diameter, the most narrow transverse diameter, and remained height of vertebra body were concerned as the factors. The patients with American Spinal Injury Association[ASIA] impairment scale grade A to D were considered as having neurology while others with ASIA grade E were considered to be without neurology. The patients with ASIA grade A were classified to paraplegia group and the patients with ASIA grade B to E were not thought to be paraplegia. Statistical analysis for these groups were performed. Results : Spinal canal compromise [P<0.001] have correlation with neurological deficit. The most narrow sagittal diameter was smaller in the group with deficit than that in the group without deficit [P<0.004]. Also, combined injury have correlation with neurology [P=0.028]. Spinal canal compromise [P<0.001], sagittal diameter [P=0.032], the most narrow sagittal diameter [P=0.025], and Denis type [P<0.001] also have correlation with paraplegia. Conclusion : The factors of percentage of spinal canal compromise, the most narrow sagittal diameter, and combined injury are predictive of neurological deficit. The patients with paraplegia may be predicted by the factors such as type of injury, spinal canal compromise, sagittal diameter, the most narrow sagittal diameter, and Denis type.

• Korean Journal of Ecology and Environment
• /
• v.46 no.4
• /
• pp.561-569
• /
• 2013

This study examines locational environment factors that may affect the vegetation structure in the forests of Naejang National Park. To that end, we selected LAI (Leaf Area Index), diameter at breast height, and tree height as structural variables as well as altitude above sea level, gradient, slope direction, soil moisture, topographic location, and amount of solar radiation as locational environment factors, using the method of canonical correlation analysis in order to find out correlation between them. As to the simple correlation between the locational environment factors and structural variables, the correlation coefficient was relatively low (0.6). The values of LAI, measured along the ridge with higher altitudes, decreased as the soil moisture and solar radiation increased. However, LAI increased as the gradient increased and the slope direction faced the north (farther from the east). In respect of the diameter at breast height, the diameter decreased as the altitude and gradient increased. But the diameter increased as the moisture and solar radiation increased. The tree height decreased as the moisture increased and the site was closer to the ridge. These various correlations show a variety of locational environment factors in the national park, implying that the structural variables are affected by complex locational environment factors. This study conducted a canonical correlation analysis on locational environment factors which may affect the vegetation structure, and the result showed that LAI increased and tree height & diameter at breast height decreased as the solar radiation & moisture decreased and altitude increased. Although more factors that may affect vegetation structure (e.g. climate) should be taken into account, this study is significant in that the vegetation structure, which can adapt to more unfavorable conditions in terms of solar radiation, moisture, and higher altitudes, could be inferred in a statistical way. The results of this study, especially the locational environment factors based on DEM, can be used for assessing diversity of vegetation structure in a forest and for monitoring the structure in a national park on a regular basis so as to establish more effective maintenance plans of a park.

• Journal of Forest and Environmental Science
• /
• v.34 no.2
• /
• pp.119-125
• /
• 2018

The tropical forests in developing countries are faced with the problem of illegal exploitation of trees. However, dearth of empirical means of expressing the dimensions, structure, quality and quantity of a removed tree has imped conviction of offenders. This study aimed at developing a model that can effectively estimate individual tree basal area (BA) from stump diameter (Ds) for Tectona grandis stands in Omo Forest Reserve, Nigeria, for timber valuation in case of illegal felling. Thirty-six $25m{\times}25m$ temporary sample plots (TSPs) were laid randomly in six age strata; 26, 23, 22, 16, 14, and 12 years specifically. BA, Ds and diameter at breast height were measured in all living T. grandis trees within the 36 TSPs. Least square method was used to convert the counted stumps into harvested stem cross-sectional areas. Six basal area models were fitted and evaluated. The BA-Ds relationship was best described by power model which gave least values of Root mean square error (0.0048), prediction error sum of squares (0.0325) and Akaike information criterion (-15391) with a high adjusted coefficient of determination (0.921). This study revealed that basal area estimation was realistic even when the only information available was stump diameter. The power model was validated using independent data obtained from additional plots and was found to be appropriate for estimating the basal area of Tectona grandis stands in Omo Forest Reserve, Nigeria.

• Journal of Environmental Science International
• /
• v.14 no.9
• /
• pp.851-860
• /
• 2005

In order to how well predict ISCST3(lndustrial Source Complex Short Term version 3) model dispersion of air pollutant at point source, sensitivity was analysed necessary parameters change. ISCST3 model is Gaussian plume model. Model calculation was performed with change of the wind speed, atmospheric stability and mixing height while the wind direction and ambient temperature are fixed. Fixed factors are wind direction as the south wind(l80") and temperature as 298 K(25 "C). Model's sensitivity is analyzed as wind speed, atmospheric stability and mixing height change. Data of stack are input by inner diameter of 2m, stack height of 30m, emission temperature of 40 "C, outlet velocity of 10m/s. On the whole, main factor which affects in atmospheric dispersion is wind speed and atmospheric stability at ISCST3 model. However it is effect of atmospheric stability rather than effect of distance downwind. Factor that exert big influence in determining point of maximum concentration is wind speed. Meanwhile, influence of mixing height is a little or almost not.

• Journal of Korean Society of Forest Science
• /
• v.99 no.2
• /
• pp.213-219
• /
• 2010

Early results from a field trail of Agathis loranthifolia are reported from a progeny test of 100 open-pollinated families in west Java, Indonesia. The average of height and diameter at root collar (DRC) was 40.18 cm and 0.52 cm at age 15 months. Family survival rate ranged from 86.5% at age 10 months to 81.7% at age 15 months. Family means of 10 best and 10 poorest families for each trait indicated that there was a large difference of growth performances among individual families. For height and DRC growth, the poorest groups had averages of 33.98 cm and 0.43 mm while the averages of the best groups were 47.35 cm and 0.62 mm at age 15 months as a difference of 39.36% and 43.65%, respectively. Differences between the best group and the test population mean, which is the selection differential, were implying that genetic gain from selection for the improvement of height and DRC growth would be achieved. The family variances of DRC and height were relatively small compared to replicate and residual variances. Family heritabilities for both studied traits were fluctuated, and the genetic coefficients of variation for DRC and height at age of 15 months were 7.19% and 5.22%, respectively.

• Design & Manufacturing
• /
• v.10 no.3
• /
• pp.20-24
• /
• 2016

Foaming is a step of forming by the ratio of the internal combustion chamber in a state where the in flow of the material is suppressed, if the diameter is small and a high to a crack generated on the molding is not possible. The present study, we studied using as part experiments for forming the circular shape of the forming height of 10 mm without the occurrence of cracks, results preformed primary, the need to set the height of the forming than the height of the product, preformed secondary. It was able to increase the height of the molded product with less than the height of the next step to be carried out compression processing to create a small comer of the desired shape. In addition, it was found that on a great influence on the quality of the final quality on the final molding of the primary preformed, secondary.

• Journal of Power System Engineering
• /
• v.15 no.5
• /
• pp.43-48
• /
• 2011

The article represents an experimental investigation on friction and turbulent flow characteristics of free airflow through a rectangular duct fitted with semicircular ribs of uniform height (e = 3.5 mm) on one principle wall. The aspect ratio of the rectangular duct was AR= 5 where the duct height (H) was of 30 mm. Four different rib pitches (P) of 28 mm, 35 mm, 42 mm and 49 mm were used for constant rib height to hydraulic diameter ratio (e/Dh = 0.07) and constant rib height to channel height ratio (e/H = 0.11). The experimental results show some significant effects on pressure drop as well as turbulent characteristics at various configurations among different numbers of rib arrangements varying Reynolds number in the range of 15000 to 30000. Pressure transducer and hot wire anemometer were used for data acquisition of this experiment.