• Archives of Plastic Surgery
• /
• v.43 no.1
• /
• pp.59-65
• /
• 2016

Background In East Asia, the foot is the most common site of cutaneous melanoma. The purpose of this study was to investigate the differences between cutaneous melanoma of the foot and melanomas of other sites. Methods We studied 52 patients who underwent surgical treatment for cutaneous melanoma of the foot from September 2000 to January 2015. Through a retrospective review of their medical records, we collected data relating to their sex, age, histopathological subtype, Clark level, tumor thickness, lymph node involvement, stage, and survival rate, and we compared these parameters to those of 61 patients treated for melanoma of other sites. Moreover, we analyzed the surgical procedures, complications, and mortality rates associated with cutaneous melanoma on various parts of the foot. Results Melanoma of the foot differed from other melanomas only in the histopathological subtype. Other clinical features, including survival rate, did not differ significantly between the two groups heel was the most common site of melanoma of the foot (22 cases, 42.3%). The method of reconstruction varied depending on the region involved. Conclusions A comparison of melanoma of the foot to other melanomas showed that melanoma of the foot was associated with a significantly different distribution of histological subtypes. Consistent with previous findings, we found that the acral lentiginous subtype was the most common among melanomas of the foot. Furthermore, in contrast with previous studies, we did not find a worse prognosis or lower survival rate for melanoma of the foot in comparison with other melanomas.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.1
• /
• pp.77-84
• /
• 2020

PURPOSE: This study compared the activities of the trunk muscles during crutch walking to determine which of the crutch length measurements is most beneficial. METHODS: Twenty young women volunteered to participate in this study. After adjusting crutch length, the participants performed a three-point walking with nondominant leg limited in weight bearing. This study used six crutch length measurements: (1) Height-40.6cm, (2) Height'.77, (3) Olecranon-to-finger length, (4) Axillary-toheel length, (5) Arm-span length-40.6cm, and (6) Arm-span length'.77. The EMG activities of the internal oblique (IO), rectus abdominis (RA), multifidus (MF), and erector spinae (ES), muscles on the weight bearing side were monitored using wireless surface EMG. RESULTS: The EMG activities of the RA and ES appeared to be significantly different among the crutch length measurements (p<.05). The post-hoc test showed that the 'Arm-span length-40.6cm' was significantly greater in the RA activity when compared to the 'Height'.77' and 'Axillary-to-heel length' measurements, and in the ES activity when compared to 'Height'.77' measurements. Furthermore, IO/RA and MF/ES ratios showed significant differences among the crutch length measurements (p<.05). In the post-hoc test, significant difference was observed between 'Olecranon-to-finger length' and 'Arm-span length-40.6cm' for the IO/RA ratio, and between 'Height'.77' and 'Olecranon-to-finger length' and between 'Height'.77' and 'Arm-span length-40.6cm' measurement for the MF/ES ratio. CONCLUSION: These findings suggest that the 'Height'.77' measurement is relatively advantageous to optimize the activities of trunk muscles during the crutch walking, and allow simple measurements of the crutch length.

• Journal of Welding and Joining
• /
• v.30 no.2
• /
• pp.65-69
• /
• 2012

Environmental and health concerns over the lead have led to investigation of the alternative Pb-free solders to replace commonly used Pb-Sn solders in microelectronic packaging application. The leading candidates for lead-free solder alloys are presently the near eutectic Sn-Ag-Cu alloys. Therefore, extensive studies on reliability related with the composition have been reported. However, the insufficient drop property of the near eutectic Sn-Ag-Cu alloys has demanded solder compositions of low Ag content. In addition, the solder interconnections in automobile applications like a smart box require significantly improved vibration resistance. Therefore, this study investigated the effect of alloying elements (Ag, Bi, In) on the vibration fatigue strength. The vibration fatigue was conducted in 10~1000Hz frequency and 20Grms. The interface of the as-soldered cross section close to the Cu pad indicated the intermetallic compound ($Cu_6Sn_5$) regardless of solder composition. The type and thickness of IMC was not significantly changed after the vibration test. It indicates that no thermal activities occurred significantly during vibration. Furthermore, as a function of alloying composition, the vibration crack path was investigated with a focus on the IMCs. Vibration crack was initiated from the fillet surface of the heel for QFP parts and from the plating layer of chip parts. Regardless of the solder composition, the crack during a vibration test was propagated as same as that during a thermal fatigue test.

• The Research Journal of the Costume Culture
• /
• v.19 no.3
• /
• pp.473-487
• /
• 2011

The purpose of this study is to analyze the body type and fashion of posthuman in SF movies. The method of this study was to analyze documentaries, internet web site, fashion books and so forth. The results were as follows: The body types of posthuman were expressed as mutation type, prosthetic type, clone type by biological hybrid or renovation and digital type by computer simulation. The mutation type was expressed as reinforcement of masculinity or feminity and reinforcement of body functions. The fashion item was expressed as a black tailored suit, leather jacket, cat suit, whip, black sunglass, garter belt, high heel shoes, short pants, black one piece dress and functional body suit. The prosthetic type was expressed as reinforcement of body functions and reinforcement of masculinity or feminity. The fashion item was expressed as a military item, high-tech power suit and ergonomic armor suit. The clone type was expressed as the plural ego with reinforcement of body functions. The fashion item was expressed as a power shoulder jacket, fake fur coat, vinyl, black see-through look and functional suit. The digital type was expressed as reinforcement of masculinity or feminity and the plural ego with reinforcement of body functions. The fashion item was expressed as a data suit, leather jacket, black over coat, boots, black sun glass, ethnic items and military items. The meanings of posthuman fashion in SF movies were impurity of posthuman, display of superhuman's power by sexuality, metaphor of power and fantasy of superhero in opposition futuristic dystopia. As mentioned above, posthuman body type and fashion in SF movies become the conversational topic in the real world. The fact that we think about utopia and identity of posthuman in the future is of great significance.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.7 no.2
• /
• pp.258-266
• /
• 1996

Self-injurious behaviors are commoly founded in the case of the developmentally impaired, such as mental retardation and autistic disorder. These behaviors are primary serious sources of distress for both child and their parents, another obstacle to overcome within the family and society. The author has a case that a child, had never before shown self-injurious behaviors. He abruptly started to injury his face and heel. The beginnings of these harmful behaviors are associated with symptoms of physical illness, such as fever, chills and general aches. The self-injured wounds were very severe. After the patient was treated with haloperidol and improved his physical conditions, self-injurious behaviors disappeared. The author reports the child's clinical process, characteristics of self-injurious behaviors, and discuss the treatment factors, along with a literature review.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.687-694
• /
• 2005

In current design practice, the thickness of the floor slab has been determined to satisfy requirement for deflection control. However, previous study shows that the floor thicknesses in residential buildings may not satisfy the floor vibration criteria, even though the thickness is determined by the serviceability requirements in current design provisons. Thus it is necessary to develop the procedure to determine slab thickness that satisfies the floor vibration criteria. This study attempts to propose slab thickness for flat plate slab systems that satisfies floor vibration criteria against occupant induced floor vibration(heel drop load). Two boundary conditions(simple and fixed support), three square flat plates(4, 6, 8m), and five concrete strength($18\~30$ MPa) are considered. Since there are large uncertainties in loading and material properties, probabilistic approach is adopted using Monte-Carlo simulation procedures.

• Journal of Korean Foot and Ankle Society
• /
• v.12 no.1
• /
• pp.41-46
• /
• 2008

Purpose: This study was designed to evaluate characteristics of foot pressure distribution with or without partial prosthetic foot in transmetatarsal amputee. Materials and Methods: The subjects were 9 transmetatarsal amputees. Foot pressures were measured at hallux, the $1^{st}-5^{th}$ metatarsal head (MTH), mid-foot, condyle area by F-scan system in amputated or contralateral foot during active walking. Results: In amputated foot, mean peak pressure was greatest in midfoot without prosthetic foot but it was greatest in hindfoot with prosthetic foot. In unaffected foot, although mean peak pressure was higher in hallux, and $1-5^{th}$ MTH compared to amputated foot, it was greatest in hind foot both with and without prosthetic foot. However, in unaffected foot, mean peak pressure significantly decreased in hallux and $5^{th}$ MTH after wearing the prosthetic foot. There was a significant difference in mean peak pressure in hallux and $5^{th}$ MTH between amputated and unaffected foot after wearing prosthetic foot. However, other region had no significant difference with or without prosthetic foot between feet. Conclusions: The use of partial prosthetic foot tends to shift weight bearing from the heel area to forefoot and could significantly reduce hind foot peak pressure and redistributed to peak pressure. The partial prosthetic foot can also offer the peak pressure to reduction both amputated foot and unaffected foot and help to toe off during walking.

• Journal of Korean Foot and Ankle Society
• /
• v.21 no.1
• /
• pp.21-26
• /
• 2017

Purpose: To evaluate the clinical outcome of an operation with early rehabilitation from ankle fracture in accordance with the injury type. Materials and Methods: A total of 136 patients (70 males and 66 females) who underwent surgery and early rehabilitation for ankle fractures between December 2008 and December 2013 were retrospectively reviewed. The average age was 47.9 years, with a range of 18~79 years. The mean follow-up period was 28.7 months, with a range of 24~102 months. All patients were classified in accordance with the Lauge Hansen classification and anatomic fracture site. Moreover, the presence of ligament injuries were documented. A short-leg cast was applied postoperatively for two weeks; thereafter, patients began the range-of-motion exercises after cast removal. Full weightbearing was allowed at 2 weeks postoperatively. Each patient was assessed radiologically and clinically based on the OlerudMolander score, visual analogue scale (VAS) for pain, joint stiffness, and capability of single heel raising. Results: Seventeen patients (12.5%) complained of postoperative pain (VAS score 1~3), and the incidence was higher in patients with trimalleolar fractures or associated ligament injuries. Twenty-three patients (16.9%) complained of postoperative ankle stiffness. The mean Olerud-Molander score was 75.4/80 (range, 55~80). Olerud-Molander scores were lower in patients with ligament injuries than in those with fracture alone. There was no nonunion or fracture displacement even after early weightbearing walking. Conclusion: In this retrospective series, early rehabilitation after surgical restoration of ankle mortise by anatomical reduction and stabilization was shown to be successful. Earlier motion exercise and weightbearing walking can minimize fracture complications like joint stiffness or weakness in ankle fracture.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.1
• /
• pp.90-97
• /
• 2008

Wedged insoles are frequently used to reduce the pains caused by the knee arthritis or the foot overuse syndrome. The present study analyzed the effect of wedged rear-foot insoles on the foot pressure in walking. Three medially wedged insoles with three angles (5, 8 and 15") and three laterally wedged insoles with the same angles were made, and a flat insole were prepared. Ten healthy males in twenties walked in a specified line with each insole. Center of pressure (COP), relative vertical force and maximum force on anatomical areas were analyzed from the measured foot pressure data. At heel contact, medially wedged insoles significantly increased the pressure of the medial foot side (COP moved medially by 2-5 mm and maximum pressure of 1st metatarsal head increased by 110-120% relative to the flat insole), In contrast, laterally wedged insoles significantly increased the lateral side pressure (COP moved laterally by 1-5 mm and the ratio of $2^{nd}$ metatarsal head pressure to $1^{st}$ metatarsal head increased by 0.5-2.0 relative to the flat insole). At toe off, both wedged insoles significantly increased the pressure of the medial foot side (COP moved medially by 0.5-10 mm and the ratio of $1^{st}$ metatarsal head pressure to $5^{th}$ metatarsal head increased by 2.0 relative to the flat insole). Especially, the laterally wedged insoles significantly increased the relative vertical force (6-12%) of the rear-foot more than the flat insole.

• Journal of the Korean Society of Physical Medicine
• /
• v.12 no.4
• /
• pp.83-92
• /
• 2017

PURPOSE: The purpose of this study was to investigate the effect of the elastic band and stretching exercise program on ankle joint maximal voluntary isometric contraction (MVIC) and plantar pressure in high-heel wearing women in their 20s. METHODS: Twenty women in their twenties were randomly assigned to the experimental group (n=10) and the control group (n=10). The experimental group (n=10) performed the elastic band exercise program, while the control group (n=10) performed the stretching exercise program. Both exercise programs were performed three times a week for a total of four weeks. The BTE Primus RS was used in order to measure the ankle joint MVIC during dorsiflexion, plantar flexion, inversion, and eversion. Maximum pressure ($N/cm^2$), average pressure ($N/cm^2$) were measured using the Pedoscan. SPSS v. 21.0 software was used for all statistical analyses in this study. RESULTS: The measurement of the ankle joint's MVIC revealed that in inversion, a significant change in both feet was seen in both the experimental and control groups. In eversion, there was a significant change in both feet only in the experimental group. In terms of the rest of the results, no significant changes were visible. With regard to the plantar pressure, no significant results were seen for either foot in the comparison between or within the groups. CONCLUSION: Exercise program using elastic band and exercise program using stretching were effective on MVIC of ankle joint muscles, although it had no effect on changes of plantar pressure.