• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.58-59
• /
• 2016

Along with the logistics development, heavy-loaded warehouses and sales facilities tend to be bigger and designed as a PC structures. PC erection work of heavy-loaded structures is influenced by various factors, including the required construction duration, site and surrounding situations, safety, PC member procurement, equipment rental cost, which ultimately impact the construction cost. It requires creative efforts and a lot of time when preparing an erection plan in consideration of these factors, and the plan prepared has a great influence on safety as well as the construction duration and cost. However, many engineers do not have enough experiences on PC erection work of heavy-loaded, long span structures, making it difficult for them to set erection plans and establish simulations. The study's results will provide a knowledge to obtain a solution for engineers to establish PC erection plans of heavy-loaded, long span structures.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.837-842
• /
• 2007

Since construction materials have been towards larger and heavier, the rate of accident associated with installation works of heavy construction materials is increasing. Installation works of heavy construction materials lead to frequent accidents, increasing the WMSDs(Work-Related Musculo-Skeletal Disorders) in construction site. In case of installation work of heavy glass ceiling, the rate of accidents such as falling and collision is increasing as well. This paper describes a ergonomic design of working platform(deck) in a glass ceiling installation robot. As well as, a design of working process is considered to accomplish an efficient installation work. As a result of the design, an installation work of heavy glass ceiling by the robot will be expected safety assurance and retrenchment of the construction cost and period.

• Safety and Health at Work
• /
• v.8 no.2
• /
• pp.226-230
• /
• 2017

The performance of sound barriers was evaluated to determine their technical effectiveness and practicality in reducing noise exposures to operating engineers in construction. Commercially purchased sound dampening mats (SDMats) were installed inside three heavy-equipment engine compartments. Sound pressure levels (SPLs) were measured before and after installing the SDMats while the equipment was on idle and full-throttle settings where it normally operates. SPLs inside the heavy-equipment operator cabs were significantly reduced by 5.6-7.6 dBA on the full-throttle setting following installation of the SDMats (p < 0.01). The evaluated engineering control intervention was simple to install, affordable, and substantially reduced the engine noise reaching the heavy-equipment operator, potentially reducing reliance on hearing-protection devices to protect construction workers from noise exposures.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.1
• /
• pp.25-33
• /
• 2016

This guidance purpose is setting Safety Health work instruction for prevent accident such as falling from heights work, collapse and trapped under the heavy equipment and Sediment collapse during retaining wall work by unsder the Industry Safety and Health rules.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.501-509
• /
• 2020

The purpose of this study was to provide basic information about the analysis of the changes in problem behavior, sleep quality and quality of life of the people with intellectual disability through the application of the heavy work activities. This study subjects were 10 people with intellectual disability and they participated in the this activities for 12 weeks. Through the application of heavy work activities, Korean-Adaptive Behavior Scale was used to analyze the changes in problem behavior, sleep quality assessment was used to analyze the changes in sleep quality and satisfaction with life scale was used to analyze the changes in quality of life. As the results, the decrease of problem behavior, the improvement of sleep quality and quality of life were showed. Heavy work activities should be act to decrease the problem behavior, improve sleep quality and quality of life of the study subjects. Thus, heavy work activities should be considered to apply for the people with intellectual disability.

• Journal of Families and Better Life
• /
• v.34 no.5
• /
• pp.119-134
• /
• 2016

The purpose of this study was to examine the influence of human relationships, compensation, and heavy work on the burnout of childcare teachers. The subjects were 290 childcare teachers in Seoul and Gyeonggi-do province. The collected data were analyzed by t-test, one-way ANOVA, Duncan test, Pearson's correlation, and the multi regression analysis. The main findings of this study were as follows. First, there were significant differences in the burnout according to individual characteristics such as types of childcare center, daily working hours, and monthly incomes. Second, human relationships, compensation, and heavy work directly influenced the burnout of childcare teachers. A heavy workload was the most important variable in burnout of childcare teachers. Next, the relationship with directors, relationship with parents, compensation, and relationship with co-workers had an effect on burnout of childcare teachers. The results of this study provide basic data to reduce burnout of childcare teachers.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.159-164
• /
• 2005

In this paper, we study some problems of the scheduling on the fixed area in a shipbuilding. The scheduling, constrainted a working area, is not easy to make a load balance and to operate a change of daily work plan. we proposed a block arrangement algorithm to make the load balance and developed a system used to operate the change of daily work plan.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.04a
• /
• pp.65-71
• /
• 2009

The process of cold rolling is becoming more severe with the increase in the production of high tensile steel strip as a result of increased demand. Consequently, there is a need to develop work roll materials with better resistance to wear and roll failure. DOOSAN has developed an improved in-house 5%Cr alloy, New HSR1, with properties superior to the existing in- house 5%Cr alloy, Old HSR1. Test alloys were designed with controlled amounts of Si and Mn based on Old HSR1 and an optimum alloy was chosen based on thermal shock tests. A prototype work roll was manufactured with New HSR1, and properties of test specimens were evaluated. The results indicated that New HSR1 has better properties than Old HSR1. After application of New HSR1 work rolls, productivity increased due to advanced resistance to wear and roll failure.

• Journal of Fashion Business
• /
• v.19 no.3
• /
• pp.130-143
• /
• 2015

By studying 3-D virtual human modeling, motion-capturing and clothing simulation for easier and safer work clothes development, this research aimed (1) to categorize heavy manufacturing work motions; (2) to generate a 3-D virtual male model and establish painting work motions within a 3-D virtual clothing simulation system through computerized body scanning and motion-capturing; and finally (3) to suggest simulated clothing images of painting work clothes developed based on virtual male avatar body measurements by implementing the work motions defined in the 3-D virtual clothing simulation system. For this, a male subject's body was 3-D scanned and also directly measured. The procedures to edit a 3-D virtual model required the total body shape to be 3-D scanned into a digital format, which was revised using 3-D Studio MAX and Maya rendering tools. In addition, heavy industry workers' work motions were observed and recorded by video camera at manufacturing sites and analyzed to categorize the painting work motions. This analysis resulted in 4 categories of motions: standing, bending, kneeling and walking. Besides, each work motion category was divided into more detailed motions according to sub-work posture factors: arm angle, arm direction, elbow bending angle, waist bending angle, waist bending direction and knee bending angle. Finally, the implementation of the painting work motions within the 3-D clothing simulation system presented the virtual painting work clothes images simulated in a dynamic mode.

• Journal of the Korean Society of Safety
• /
• v.21 no.4 s.76
• /
• pp.108-113
• /
• 2006

The Work-Related Musculoskeletal Disorders(WMSDs) have been an rising issue since the 1970s. So many manufacturing companies have been tried to improve the work environments for the control and the prevention of the WMSDs. Specific risk factors associated with WMSDs include repetitive motion, heavy lifting, forceful exertion, contact stress, vibration, awkward posture and rapid hand and wrist movement. But recently it has reported that besides working conditions, job stress is the important hazard causes which lead to WMSDs. This study investigates the relation between WMSDs and Job stress from 1426 workers in Heavy Industry. Job stress was evaluated by Karasek's model. Job stress was associated with job satisfaction. Job demand was associated with the WMSDs, but job control was not associated with the WMSDs. The results can be used to design the management program for the WMSDs and the job stress.