• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.33-40
• /
• 2007

Crashworthiness design is of special interest in automotive industry and in the transportation safety field to ensure the vehicle structural integrity and more importantly the occupant safety in the event of the crash. Front side assembly is one of the most important energy absorbing components in relating to the crashworthiness design of vehicle. The structure and shape of the front side assemblies are different depending on auto-makers and size of vehicles. Thus, it is not easy to grab an insight on designer's intention when you glance at a new front side member without experiences. In this paper, we have performed the explicit nonlinear dynamic finite element analysis on the front side assembly of passenger cars to identify the mechanical roles of major parts in relation to collapse modes from the viewpoint of reverse engineering. To do this, we have performed crash FE analysis for the two different assemblies of small car and heavy passenger car and have compared dynamic behaviors of the two.

• 한국ITS학회 논문지
• /
• 제14권4호
• /
• pp.52-61
• /
• 2015

승용차 환산계수는 도로의 서비스 수준 및 용량 분석 등에 활용되는 자료이다. 본 연구에서는 개별차량자료를 활용하여 차로수별로 국토교통부에서 구분하고 있는 12가지 차종에 대하여 승용차 환산계수를 산출하였다. 산출결과 차종의 등급이 높을수록, 차로수가 많을수록, 주말일수록 승용차 환산계수의 값이 큰 것으로 나타났다. 승용차 환산계수를 활용하여 중차량 보정계수를 산출하였으며, 4, 6차로에서는 도로용량편람에서 제시한 결과와 비교했을 때 상대적으로 그 값이 작은 것으로 나타났다. 또한 차로수별로 중차량 비율에 따른 평균 승용차 환산계수 변화 모형을 추정하였으며, 2차로에서 PCE에 미치는 중차량의 영향이 가장 큰 것으로 나타났다. 이러한 연구결과는 다차로에서 중차량의 영향이 적고 주말의 통행은 상대적으로 업무통행 차량이 적기 때문으로 판단된다.

• 대한교통학회지
• /
• 제8권2호
• /
• pp.99-107
• /
• 1990

본 연구에서는 대형차의 승용차환산계수(PCE)를 결정하기 위해 혼합교통류의 흐름-저항의 관계를 나타내는 일반식을 확장하여 차두시간의 하여 항으로써 환산치를 산정하는 공식을 개발하였다. 여기서 차량배열 형태에 따른 각 경우 외 차두시간의 값은 수집된 교통자료의 희귀분석을 통해 추정토록 하였으며, 제시된 PCE치의 적절성을 검증하기 위해 거시적 접근방법에 의한 산정된 산치와 비교 분석토록 하였다.

• 대한교통학회지
• /
• 제14권3호
• /
• pp.61-73
• /
• 1996

The objective of this paper is to estimate the PCE(Passenger Car Equivalents) of various vehicle types on expressway work zones. Headway samples of 5,359 vehicles were collected in 6 work zones in the Kyungbu Expressway between September and November of 1995. Average headways of 8 vehicle types based on the vehicle classification method of the Department of Construction and Transportation were calculated. A statistical test of effects of the types of the preceding vehicles were performed for the average headways between a vehicle type preceded by other vehicle types. The results show that the effects of the type of preceding vehicles are significant (exceeded 5% and 10% significance levels) and the PCEs of heavy vehicles on expressway work zones are higher than that of basic expressway section. Therefore, different adjustment factors should be applied for heavy vehicles in estimating saturation flow rates of expressway work zones. The study also derives an equation to determine PCEs of these vehicle types.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.45.3-45
• /
• 2001

This paper deal with a fault detection algorithm for front wheel passenger car systems by using robust $H{\infty}$ control theory. Firstly, we present a unified formulation of vehicle dynamics for front wheel car systems and transform this formulation into state space form. Also, by considering the cornering stiffness which depends on the tyre-road contact conditions, a multiplicative uncertainty for vehicle model is described. Next, the failures of sensor and actuator for vehicle system are defined in which the fault .lter is considered. From the nominal vehicle model, an augmented system includes the multiplicative uncertainty and the model of fault filter is proposed. Lastly by using $H{\infty}$ norm property the fault detect conditions are deefi.ned, and the actuator and sensor failures are detected and isolated by designing the robust $H{\infty}$ controller, respectively.

• 대한기계학회논문집A
• /
• 제39권2호
• /
• pp.235-240
• /
• 2015

디지털 기기의 발달과 더불어 능동안전시스템 또한 비례적으로 발달됨에 따라 4.5 톤 이상 중대형상용차에도 능동안전시스템에 대한 요구가 대두되고 있다. 승용차량과 달리 중대형 상용차량 경우 카메라 장착 위치가 상대적으로 높아 차선 인식에 불리한 조건을 가지고 있다. 본 논문에서는 공간영역처리 기반 중 하나인 소벨 에지(Sobel Edge) 추출과 허프 변환(Hough Transform) 기법과 색 변환보정 기법으로 국내 도로 환경에 맞는 차선 인식에 대한 방법을 제시하고, 영상을 통한 전방의 차량을 인식하는 객체 인식 기법 중에 Haar-like 기법, Adaboost 기법, SVM 기법, Template Matching 기법 등을 적용 및 분석을 통하여 검출 오류를 줄이기 위한 전방 차량 인식 방법을 제안한다. 성능검증을 위해서 실차평가를 실시하였으며, 차선 인식에 대해 98% 이상의 높은 인식률을 얻었다.

• 한국항만학회지
• /
• 제13권1호
• /
• pp.87-100
• /
• 1999

This study was focused on analyzing the headway of various types of trailer in Pusan city with the high heavy vehicle rate. Then Passenger Car Equivalent(PCE) was calibrated in order to identify the impact of trailers in the traffic flow at the signalized intersections. To fulfill this goal types of trailer were classified into five categories such as full trailer semi-trailer unloaded semi-trailer semi-trailer loaded with 20ft container and semi-trailer loaded with 40ft container and Passenger Car Equivalents were identified. the Results are as follows: 1) The PCE’s were 2.64, 1.51, 2.09, 2.16 and 2.23 respectively. 2) The saturation flow rate on the signalized intersection was lower than that on the multi-lane highway in the big city of Korea. 3) The start-up delay on the thru lane was similar to the average value in our country but the start-up delay on the left-turn lane was longer than the average value in our country by the impact of container Vehicles.

• 한국자동차공학회논문집
• /
• 제4권1호
• /
• pp.63-74
• /
• 1996

Automatic transmission for heavy duty vehicles is a part of the power pack which includes steering and braking systems. This transmission in different from the one for passenger car. Therefore, in order to understand the trend of the important design parameters, maneuverability, acceleration performance and maximum speed, we need to analyze the total performance characteristics of the power transmission systems. In this study, modeling of the automatic transmission in heavy duty vehicle is carried out and the performance analysis method is presented. Results can be used for performance estimation data in the analysis for several combination method which determines the optimal parameters on the basis of penalty functions and weightings. And the estimation method of the important performance parameters such as engine inertia or power loss of engine by experiments is presented.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.738-741
• /
• 2003

In general, the essential requirement for cruisers or car ferries is the reduction in noise to ensure high quality and comfort. Recently, the Ro-Ro Passengers Ferry (ROPAX) was built in Hyundai Heavy Industries. In order to minimize the noise levels, careful attention have to De paid by the special committee of experts from the initial design stage to the sea trial. Proper countermeasures, considering the characteristics of sources and receiver spaces, were applied from the noise prediction and various experiment results. Finally, this ship was successfully delivered with excellent noise properties. This paper describes the procedure of noise analysis, the countermeasures of noise control, and the measurement results of the sea trial. Onboard noise analysis had been carried out by statistical energy analysis program and outdoor noise prediction program based on ISO9614. The prediction results are in good agreements with the measurement results. The technology to minimize the noise levels for cruisers or car ferries has been established throughout the construction of this ship.

• 전기학회논문지P
• /
• 제62권3호
• /
• pp.127-132
• /
• 2013

In order to check traction of the elevator, the load-test is positively necessary on the inspection of elevator in Korea. So actual loads are used in the elevator car for the load-test. However, some of advanced countries in Europe, for example Germany, are using the alternative method with no load test instead of traditional load-test. Commonly hydraulic elevator, compared to passenger elevator is mainly used for loading heavy weights. It requires a great deal of labor to carry out load-test. The reason is why we developed a new inspection skill for the load-test of hydraulic elevator without actual loads. The results of studies show that the new method of the load-test can be replace the traditional load-test.