• 한국폐기물자원순환학회지
• /
• 제35권8호
• /
• pp.721-730
• /
• 2018

We investigated the effects of heavy metals in cement in the last 3 years and the amount of waste in the cement manufacturing process. The result shows that the average $Cr^{6+}$ content in cement products is controlled at 10 mg/kg. Cu and Pb have lower detection tendency in white cement than in ordinary portland cement. In addition, heavy metals such as Cd show a certain level of detection regardless of the input wastes. Copper slag and phosphate gypsum are the main influencing factors on the heavy metals in cement products. In auxiliary fuels, plastics waste and wood waste are considered to affect heavy metals in cement products. Alternative raw materials are considered to be affected by the alternative raw materials managed as byproducts. In the case of supplementary fuels, auxiliary fuels managed as waste instead of auxiliary fuels managed as byproducts affect the heavy metals in cement. This study examined the input amount without considering the heavy metals in each waste. Therefore, the result may vary in different situations, and further research must be conducted to supplement the findings. However, if the heavy-metal contents in the waste are constant, it can be used as a reference material for the control of heavy metals in cement products.

• 환경영향평가
• /
• 제7권2호
• /
• pp.135-143
• /
• 1998

In order to study the general characteristics of reservoir and stream sediments, various analysis tests were conducted. Water contents and ignition loss were measured to know the primary sediment characteristics. The COD, total phosphorus and nitrogen were contained for the determination of organic substance content. For the purpose of establishing the contamination degree of heavy metals, some heavy metal contents were investigated. In heavy metal contents, reservoir sediments showed somewhat higer value than stream sediments. As a result, the reservoir sediment content of all analysis items were higher than stream sediment.

• 한국지반공학회논문집
• /
• 제21권5호
• /
• pp.231-241
• /
• 2005

지반오염조사에 대한 유전상수 측정기법의 적용성을 평가하기 위하여 함수비와 중금속 오염도에 따른 흙의 유전특성 변화를 분석하였다. 유전상수의 실수부와 허수부 모두 체적함수비에 따른 증가경향을 나타내었으며, 특히 MHz 범위에서 유전상수 실수부는 쌍극자모멘트에 비례하기 때문에 흙의 유전상수는 체적함수비에 따른 선형적인 증가경향을 나타내었다. 중금속 용액은 50 kHz 이하의 저주파영역에서 전극분극효과에 의해 농도 증가에 따라 유전상수 실수부가 증가하였으나, 고주파 영역에서는 이온의 수화작용에 의한 물분자의 배향분극 발현의 감소로 인하여 감소하는 경향을 나타내었다. 유전상수 허수부는 중금속 농도 증가에 따라 전도손실의 증가에 의하여 모든 주파수 영역에서 증가하는 경향을 나타내었다. 흙과 중금속 혼합시료의 경우 함수비가 큰 시료에서는 중금속 용액 자체의 유전특성이 그대로 발현되었으나, 함수비가 작은 시료에서는 공간전하분극의 영향이 우세하여 유전상수 실수부가 $10-20\%$정도 증가하는 경향을 나타내었다. 유전상수 허수부의 경우에는 중금속 농도 증가에 따른 뚜렷한 증가경향을 확인할 수 있었다. 본 연구의 결과에 의하면 중금속의 오염감지에 대해서는 유전상수 실수부보다는 허수부의 적용성이 높은 것으로 나타났으며, 현장에서의 정확한 오염도 평가를 위해서는 함수비에 대한 평가가 선행되어야 할 것으로 판단된다.

• 한국폐기물자원순환학회지
• /
• 제35권7호
• /
• pp.616-626
• /
• 2018

The quality standards of solid refuse fuel (SRF) define the values for 12 physico-chemical properties, including moisture, lower heating value, and metal compounds, according to Article 20 of the Enforcement Rules of the Act on Resource Saving and Recycling Promotion. These parameters are evaluated via various SRF Quality Test Methods, but problems related to the heavy metal content have been observed in the microwave acid digestion method. Therefore, these methods and their applicability need improvement. In this study, the appropriate testing conditions were derived by varying the parameters of microwave acid digestion, such as microwave power and pre-treatment time. The pre-treatment of SRF as a function of the microwave power revealed an incomplete decomposition of the sample at 600 W, and the heavy metal content analysis was difficult to perform under 9 mL of nitric acid and 3 mL of hydrochloric acid. The experiments with the reference materials under nitric acid at 600 W lasted 30 minutes, and 1,000 W for 20 or 30 minutes were considered optimal conditions. The results confirmed that a mixture of SRF and an acid would take about 20 minutes to reach $180^{\circ}C$, requiring at least 30 minutes of pre-treatment. The accuracy was within 30% of the standard deviation, with a precision of 70 ~ 130% of the heavy metal recovery rate. By applying these conditions to SRF, the results for each condition were not significantly different and the heavy metal standards for As, Pb, Cd, and Cr were satisfied.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1998년도 공동 심포지엄 및 추계학술발표회
• /
• pp.236-239
• /
• 1998

This research was performed to check the transport characteristics of heavy metals in contaminated soil, that is, the influence of humic acid and phosphate on transport characteristics of heavy metals was studied. From the results of column mode experiments about heavy metal behavior, the order time to reach breakthrough and equilibrium was soil ＋ humic acid( 20g ) > soil ＋ humic acid ( 5 g ) > soil without Humic acid addition > soil+humic acid( 50g ). It is because the dissolved organic carbon content increased as the soil organic matter content increased. As the phosphate increased, so did the time to reach breakthrough and equilibrium. The order of time was soil + phosphate( 50 mg ) > soil + phosphate( 20 mg ) > soil . phosphate( 10 mg ) > soil without phosphate addition. It is because the phosphate ion worked as alkalinity donor and the calcium ion co-injected worked as the accelerator of coprecipitation of heavy metals.

• 에너지공학
• /
• 제13권1호
• /
• pp.82-91
• /
• 2004

석탄 및 하수슬러지 내에 함유된 무기물질을 환경적 측면에서 안정적인 물질로 재활용하기 위해서는 회재의 형태가 아닌 슬랙의 형태로 발생시키는 것이 한 방법이다. 가스화 반응에서 생성된 석탄 슬랙과 소각ㆍ용융과정에서 생성된 하수슬러지 슬랙의 특성을 분석하여, 재활용 측면에서 살펴보았다. 급냉을 시킨 슬랙들은 잘게 쪼개진 수 mm크기로 발생되었고, 함유된 미연탄소분은 모두 0.15% 이하였으며 슬랙의 구조는 대부분 무결정형인 특징을 보여주고 있었다. 분석 결과를 보면, 석탄 슬랙과 하수슬러지 슬랙 모두 중금속 성분이 용출되는 양은 국내기준치의 10배나 엄격한 일본기준보다도 훨씬 낮아서 재활용 물질로 활용하는 데에 문제가 없음을 알 수 있었다. 슬랙 내에 함유된 중금속 농도에서는 큰 차이가 있었는데, 향후 중금속 함량규제가 도입될 경우에는 두 슬랙 원료의 혼합 활용을 통해 중금속 함량 조절도 가능할 것이다.

• 자원리싸이클링
• /
• 제19권2호
• /
• pp.54-62
• /
• 2010

본 연구는 석탄폐석을 폐갱도 충전용 골재로 사용 할 때 나타날 수 있는 문제점을 파악하고 그 해결 방안을 제시하기 위하여 수행되었으며, 석탄폐석이 가장 많이 적치되어 있는 태백지역의 함태 탄광 석탄폐석을 대상으로 석탄폐석의 물성, 석탄폐석으로부터 산성광산배수(AMD)의 발생 특성, 석탄폐석으로부터 중금속의 용출 특성 등을 조사하였다. 석탄폐석의 물성 연구에서는 석탄폐석의 입도분포, 입단별 화학조성 및 중금속 분포, 광물조성 등이 조사되었으며, 석탄폐석으로부터 AMD 발생 특성 연구에서는 시간, 온도, 황철석의 함량, 황화물의 종류, 폐석의 입도, 공존암의 종류 등이 AMD 발생에 미치는 영향을 조사하였고, 중금속 용출 특성 연구에서는 석탄폐석 만을 사용한 경우와 석회석과 석탄폐석을 혼합하여 안정화 시킨 시료를 대상으로 폐기물공정시험법, TCLP법, 장기연속추출법(컬럼시험)에 의한 중금속 용출 특성을 조사하였다. 연구 결과로부터 석탄폐석은 폐갱도 충전용 등의 골재로 재활용이 가능하나 지하수에 침수상태에 있는 폐갱 속에 석탄폐석 만을 투입하여 충전하면 충전 후 12일 경부터 AMD가 발생할 것으로 예측된다. AMD가 발생하면 높은 수소이온농도 때문에 폐갱 내 잔류하는 철재류 등으로부터 중금속의 용출을 가속화 하는 등 환경 요염의 염려가 있고, AMD의 발생을 막기 위해서는 석회석을 4%이상 혼합하여야 함을 알았다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권2호
• /
• pp.19-35
• /
• 2003

In order 새 investigate the spatial and seasonal variations of heavy metal pollution in heavily industrialized urban area, urban roadside sediments were collected for five years from gully pots in Seoul City. A series of studies have been carried out concerning the physicochemical characteristics of the sediments in order to evaluate the contamination of heavy metals such as Cd, Co, Cr, Cu, Ni, Pb and Zn. Roadside sediments and uncontaminated stream sediments were analyzed for total metal concentrations using acid extraction. The roadside sediments are characterized by very high concentrations of Zn (2,665.0$\pm$1,815.0 $\mu\textrm{g}$/g), Cu (445.6$\pm$708.0 $\mu\textrm{g}$/g), Pb (214.3$\pm$147.9 $\mu\textrm{g}$/g) and Cr (182.1$\pm$268.8 $\mu\textrm{g}$/g), indicating an artificial accumulation of these metals to the sediment chemistry. Comparing with average contents of uncontaminated stream sediments, roadside sediments were shown zinc 14 times (up to 64.4), copper 9 times (up to 181.7), lead 6 times (up to 63.7), cobalt 6 times (up to 168.7), nickel 4 times (up to 98.4), cadmium 2 times (up to 12.8) and chrome 2 times (up to 40.2) high content. The relative degree of heavy metal pollution for roadside sediments collected from each district in Seoul City is evaluated using the “geoaccumulation index”. As a result, heavy-metal contamination is highest centering the oldest residential district and industry area, and contamination level decreases as go to outer block of the city. The factor analysis results indicate that the levels of Cu, Ni, Fe and Cr are strongly related to numbers of factories, whereas the concentrations of Cr, Zn and Cd dependant on pollution index, indicating artificial contamination due to site-specific traffic density.

• 한국세라믹학회지
• /
• 제43권2호
• /
• pp.136-141
• /
• 2006

The stabilizing behavior of heavy metals in the silicate glass containing Electric Arc Furnace dust (EAF dust) were studied by the Toxic Characterization Leaching Procedure (TCLP) test, and the change of crystalline phase and glass network structure were investigated as a function of EAF dust content added. The glass containing EAF dust of $30\;wt\%$ an oxygen/network former ratio(R) of $2\~3$ allowing a fairly stable network structure thus showed much lower heavy metal leaching concentration than that for containing EAF dust above $50\;wt\%$ at TCLP test. For the glass containing EAF dust $50\~60\;wt\%$, however, the R was over 3, which weakened the glass network structure and increased the heavy metals leachate. Adding the EAF dust to a glass decreased the degree of Si-O-Si symmetry and increased the number of non-bridging oxygen, which decreased the chemical durability of glasses. When the dust content in a glass was over $70\;wt\%$, the Zn and Fe ions reacted to form the spinel crystal rather than to bind to network structure of glass and leaching concentration of those ions from the specimen decreased, so the spinel phase could be attributed to lowering a heavy metal leaching.

• 한국연초학회지
• /
• 제20권1호
• /
• pp.5-12
• /
• 1998

Pot experiment was conducted to investigate the effects of fly ash on growth responses and on accumulation of the heavy metals in soil. Two kinds of fly ash, anthracite and bituminous coal, were treated with different levels of 0, 0.4, 0.8, and 1.2 kg/pot(20L). Tobacco growth was better by application of fly ash than that by the control. However, the early stage of growth by application of bituminous coal, 1.2 kg/pot, was decreased due to the boron toxicity occurred by fly ash. Generally, tobacco yield was significantly increased with applying fly ash, showing the highest yield at 1.2 kg/pot for anthracite and at 0.8 kg/pot for bituminous coal. The content of total nitrogen in leaves was higher with fly ash than that of the control, while the content of calcium in leaves was low, Contents of heavy metal and the other minerals were not significantly different between the control and the treatment of fly ash. Soil pH after experiment was linearly increased with application level of fly ash, indicating that the application of bituminous coal was more effective than that of anthracite. Contents of available phosphate, exchangeable $Ca^{2+}$+ and $Mg^{2+}$ in soil were increased by application of fly ash, especially with bituminous coal. Contents of Cu, Cr, and Ni were increased with application level of bituminous coati even if the contents were still lower than critical levels for farming land. The other heavy metals were similar between the control and the application of fly ash.