• 한국환경보건학회지
• /
• 제22권2호
• /
• pp.69-82
• /
• 1996

The samples for testing have been collected from Kangdong-myon, Nongso-myon, Beomseo-my on, and Cheongryang-myon in Ulju-Ku, Ulsan-city from July 1994 to March 1995 in order to grasp status of trace metals contained in some rice, soybean and soils, and to provide references in establishing their standard 96 collected samples(48 for cereals and 48 for soils) have been tested to measure levels of Hg, Pb, Cd, Cu, and Zn through methods of trace metal containing analysis and heavy metal analysis. moisture content was also analyzed. And at the same time 0.1N-HCl soluble heavy metal content of soil was measured. The average Hg containing level of samples is 0.006 ppm for cereal and 0.062 ppm for soil, Pb is 0.302 ppm for cereal and 1.137 ppm for soil, Cd is 0.012 ppm for cereal and 0.027 ppm for soil, Cu is 2.01 ppm for cereal and 0.885 ppm for soil, and Zn is 7.853 ppm for cereal and 2.366 ppm for soil.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권2호
• /
• pp.19-35
• /
• 2003

In order 새 investigate the spatial and seasonal variations of heavy metal pollution in heavily industrialized urban area, urban roadside sediments were collected for five years from gully pots in Seoul City. A series of studies have been carried out concerning the physicochemical characteristics of the sediments in order to evaluate the contamination of heavy metals such as Cd, Co, Cr, Cu, Ni, Pb and Zn. Roadside sediments and uncontaminated stream sediments were analyzed for total metal concentrations using acid extraction. The roadside sediments are characterized by very high concentrations of Zn (2,665.0$\pm$1,815.0 $\mu\textrm{g}$/g), Cu (445.6$\pm$708.0 $\mu\textrm{g}$/g), Pb (214.3$\pm$147.9 $\mu\textrm{g}$/g) and Cr (182.1$\pm$268.8 $\mu\textrm{g}$/g), indicating an artificial accumulation of these metals to the sediment chemistry. Comparing with average contents of uncontaminated stream sediments, roadside sediments were shown zinc 14 times (up to 64.4), copper 9 times (up to 181.7), lead 6 times (up to 63.7), cobalt 6 times (up to 168.7), nickel 4 times (up to 98.4), cadmium 2 times (up to 12.8) and chrome 2 times (up to 40.2) high content. The relative degree of heavy metal pollution for roadside sediments collected from each district in Seoul City is evaluated using the “geoaccumulation index”. As a result, heavy-metal contamination is highest centering the oldest residential district and industry area, and contamination level decreases as go to outer block of the city. The factor analysis results indicate that the levels of Cu, Ni, Fe and Cr are strongly related to numbers of factories, whereas the concentrations of Cr, Zn and Cd dependant on pollution index, indicating artificial contamination due to site-specific traffic density.

• 한국환경보건학회지
• /
• 제44권5호
• /
• pp.491-501
• /
• 2018

Objectives: The aims of this study were to compare concentrations and the correspondence of human blood cadmium by using graphite furnace atomic absorption spectrometry (GF-AAS) and inductively coupled plasma-mass spectrometry (ICP-MS), which are representative methods of heavy metal analysis. Methods: We randomly selected 79 people who agreed to participate in the research project. After confirming the linearity of the calibration curves for GF-AAS and ICP-MS, the concentrations of cadmium in a quality control standard material and blood samples were measured, and the correlation and the degree of agreement were compared. Results: The detection limit of ICP-MS (IDL: $0.000{\mu}g/L$, MDL: $0.06{\mu}g/L$) was lower than that of GF-AAS (IDL: $0.085{\mu}g/L$, MDL: $0.327{\mu}g/L$). The coefficient of variation of the quality control standard material showed stable values for both ICP-MS (clinchek-1: 5.35%, clinchek-2: 6.22%) and GF-AAS (clinchek-1: 7.92%, clinchek-2: 5.22%). Recovery was relatively high for both ICP-MS (clinchek-1: 95.1%, clinchek-2: 92.8%) and GF-AAS (clinchek-1: 91.4%, clinchek-2: 98.8%), with more than 90%. The geometric mean, median, and percentile of blood samples were all similar. The agreement of the two instruments compared with the bias of the analytical values found that about 81% of the analytical values were within ${\pm}30%$ of the deviation from the ideal reference line (y=0). As a result of the agreement limit, the value included in the confidence interval was about 94%, which shows high agreement. Conclusion: In this study, we confirmed there was no significant difference in concentrations of a quality control standard material and blood samples. Since ICP-MS showed lower concentrations than GF-AAS at concentrations below the method detection limit of GF-AAS, it is expected that more precise results will be obtained by analyzing blood cadmium with ICP-MS.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.1-8
• /
• 2005

Baiyangdian Lake, the largest freshwater lake in North China, is known as 'Pearl of North China' and 'kidney of North China' fur its abundant products and multiple ecological services. However, from the 1970s, due to the ever-increasing discharge of polluted water from upstream rivers, it has been severely polluted. Sediment Investigation and analysis were conducted on contents of heavy metal (Cu, Zn, Cd and Pb) from Baiyangdian Lake in June 2004. Results showed that pollution situation at downriver regions are more serious than that of upstream regions. The seriously polluted spots are access of Fuhe River, original wastewater reservoir of Tanghe River, densely populated Chunshui Village and Wangjiazhai Village. By using method of the potential ecological risk assessment, the heavy metal evaluation of polluted sediment has been conducted. The results showed that the contents of Cd and Pb were very high in sediment of Baiyangdian Lake. There were extremely stronger ecological risk for Cd and slight- medium ecological risk for Pd. According to the current situation of Baiyangdian Lake, countermeasures and suggestions have been put forward.

• 환경영향평가
• /
• 제9권1호
• /
• pp.1-11
• /
• 2000

An environmental geochemical survey of heavy metal distribution in marine surface sediments around the ocean of Samcheonpo coal-fired power plant was conducted to investigate the possibility of coal-ash leakage from ash pond and the associated heavy metal pollution in sedimental deposits due to the operation of the coal-fired power plant. The X-Ray Diffractometry (XRD) analysis showed that the main leakage point of coal-ash was limited to a single site of the first ash pond. It also appeared that the amounts of organic carbon and metal elements were positively correlated to the grain size distribution, and that Co, Cr, Cu, Fe, Ni, and Zn were bounded to organic ligands. However, the distributions of Cd, Hg, and Mn did not have any significant correlation with the sediment grain size and organic matters. In particular, the distribution of Cd appeared to be affected by the concentration of the carbonate materials in the study area.

• Journal of Welding and Joining
• /
• 제34권6호
• /
• pp.42-46
• /
• 2016

Hydrogen assisted cracking (HAC) is one of the most complicated problem in welding. Huge amount of studies have been done for decades. Based on them, various standards have been established to avoid HAC. But it is still a chronic problem in industrial field. It is well known that the main causes of the hydrogen crack are residual stress, crack susceptible micro structures and a certain critical level of hydrogen concentration. Even though the exact generating mechanism is unclear till today, it has been reported that the hydrogen level in the weld metal should be managed less than a certain amount to prevent it. Matsuda studied that the residual hydrogen level in the weld metal can be varied even if the initial hydrogen content is same. It is also insisted in this report that the residual hydrogen concentration is in stronger correlation with hydrogen crack than the initial hydrogen content. But, in practical point of view, the residual hydrogen is still hard to consider because measuring hydrogen level is time and cost consuming process. In this regard, numerical analysis is the only solution for considering the residual hydrogen content. Meanwhile, Takahashi showed the possibility of predicting the residual hydrogen by a rigorous FE analysis. But, few commercial software suitable for solving the weld metal hydrogen has been reported yet. In this study, two dimensional thermal - hydrogen coupled analysis was developed by using the commercial FE software MARC. Since the governing equation of the hydrogen diffusion is similar to the heat transfer, it is shown that the heat transfer FE analysis in association with hydrogen diffusion property can be used for hydrogen diffusion analysis. A series of simulation was performed to verify the accuracy of the model. For BOP (Bead-On-Plate) and the multi-pass butt welding simulations, remaining hydrogen contents in the weld metal is well matched with measurements which are referred from Kim and Masamitsu.

• 한국건축시공학회지
• /
• 제23권2호
• /
• pp.113-121
• /
• 2023

본 연구에서는 부산물(석분 슬러지, 고로슬래그, 제강슬래그, 폐콘크리트 슬러지, 바텀애시) 5종과 클링커 내 중금속 분석을 위한 레이져 유도 플라즈마 분광법(LIBS) 적용성과 재현성 검토를 실험적으로 수행하였다. 클링커를 포함한 6종의 부산물 시료에 대한 ICP-MS, XRF, LIBS 분석 결과, 정량적 분석에서 ICP와 XRF의 차이가 확인되었으나, LIBS 분석은 표준분석과 일치하지 않고 시료의 정성적인 분석만 가능하였다. LIBS를 통한 정량적 분석을 위하여 Cd, Pb, Hg에 대하여 LIBS 분석 파장(Cd - 214.44nm, Pb - 405.78nm, Hg - 253.65nm)을 설정하였고, 농도별(1~1000ppm) 용액에 함침하여 건조시킨 멤브레인 표면에 레이져를 조사한 결과, 스펙트럼 강도와 농도 사이의 상관관계를 확인할 수 있었다.

• 한국광물학회지
• /
• 제31권2호
• /
• pp.75-86
• /
• 2018

본 연구는 강원도 도계광업소 수계에 발생한 적갈색침전물을 대상으로 침전환경을 파악하고, 중금속함량, 광물조성 및 그에 따른 분광학적 특성을 분석하였다. 적갈색침전물의 pH 범위는 7.59-7.94로 침전환경은 중성에 해당한다. X선형광분석 결과 철이 평균농도보다 높게 검출되었으며, 니켈, 구리 및 아연의 오염도가 높은 것으로 판명된다. X선회절분석 결과 돌로마이트, 방해석, 침철석, 자철석, 고령토, 엽납석, 석영 및 알루미늄 이소프로폭사이드의 광물이 확인되었다. 중금속 오염에 따른 분광학적 특성을 분석한 결과, 중금속함량이 증가함에 따라 가시광선 영역에서는 반사도가 증가하는 추세를, 적외선 영역에서는 반사도가 감소하는 추세를 보인다. 적갈색침전물의 분광특성은 침철석, 자철석, 고령토, 엽납석 및 알루미늄 이소프로폭사이드에 의해 발현되는 것으로 판단된다.

• 자원환경지질
• /
• 제53권6호
• /
• pp.743-753
• /
• 2020

본 연구는 폐석탄광산인 옥동탄광 하류에 위치한 밭토양과 논토양을 대상으로 중금속함량, 광물조성, 분광특성을 고찰하였다. X선 형광분석 결과 밭토양과 논토양 모두 비소가 토양환경오염 우려기준을 초과하여 검출되었으며 밭토양이 논토양보다 중금속오염지수가 상대적으로 높은 것을 확인하였다. X선 회절분석 결과 밭토양과 논토양 모두에서 석영, 방해석, 고령토, 일라이트, 스멕타이트, 자철석 그리고 적철석 광물이 검출되었다. 또한 유기물 분석을 실시한 결과 밭토양의 유기물 함량 변이가 더 큰 것으로 나타났다. 분광분석 결과 밭토양과 논토양의 전체적인 반사도 곡선의 양상과 흡광특성은 유사하게 발현됨을 확인하였다. 490nm 부근과 900nm 부근에서 토양 내 산화철에 의해, 1410nm, 1910nm 부근과 2200nm 부근에서 점토광물인 고령토와 스멕타이트군에 의한 흡광특성이 두드러지게 나타났으며 유기물의 함량이 많을수록 반사도가 감소하였다. 흡광 깊이는 밭토양과 논토양 모두 흡광특성이 발현되는 곳에서 오염 지수가 높아짐에 따라 흡광깊이는 얕아졌으며, 유기물 함량이 증가함에 따라 490nm 부근과 1916nm 부근의 흡광깊이가 얕아지는 경향을 보였다.

• 한국환경생태학회지
• /
• 제36권6호
• /
• pp.566-574
• /
• 2022

중금속은 생체 내에서 분해되지 않고 장기간에 걸쳐 축적되는 특성으로 도시의 생물 다양성을 위협하는 위험한 오염물질 중 하나이다. 도시지역의 대기 중 중금속오염을 평가하기 위해 중금속 노출 정도에 따라 생물 체내의 축적농도를 비교하는 생물학적 모니터링의 필요성이 요구되고 있다. 본 연구는 중금속 모니터링 시료로서 둥지 재료의 활용 가능성을 검토하고 중금속이 박새과 조류에 미치는 영향을 파악하기 위해 수행되었다. 연구지역은 충청남도 천안시 소재 대학교 캠퍼스 내 녹지공간(14개), 도시산림(11개), 도시공원(29개)으로 총 54개의 인공새집이 설치되었다. 조류 이용률은 도시공원 6/29개(20.68%), 캠퍼스 내 녹지공간 11/14개(78.57%), 도시산림 8/11개(72.72%)로 나타났다. 수거한 둥지로부터 이끼 재료를 채취하였고 중금속 분석을 통하여 도시녹지 유형별 중금속축적특성과 중금속이 박새과 조류의 이소 성공 여부에 미치는 영향을 비교하였다. 분석결과 아연의 평균 농도는 228.08±209.62㎍/dry g, 납의 평균 농도는 17.67±6.72㎍/dry g로 나타났다. 도시녹지 유형별 아연농도는 유의한 차이를 나타내지 않았으나(Kruskal-Wallis test, p-value=0.28) 납 농도는 유의한 차이를 보였다(Kruskal-Wallis test, p<0.05^*). 중금속 분석을 진행한 21개의 박새과 조류 둥지 중 11개(52.38%)의 둥지에서 조류의 이소가 관찰되었다. 각 도시녹지 유형에서 관찰된 조류의 이소는 캠퍼스 내 녹지공간 7개(77.78%), 도시산림 6개(85.71%), 도시공원 1개(20%)로 주로 도시산림과 캠퍼스 내 녹지공간에서 이소가 확인되었다. 박새과 조류의 이소 성공 여부에 중금속 축적특성이 미치는 영향을 확인하기 위해 중금속 농도를 비교하였으나 통계적으로 유의한 차이는 나타나지 않았다(Zn : W=44, p-value=0.74, Pb : t=0.64676, df =7.2422, p-value =0.54). 본 연구는 박새과 둥지 재료를 중금속 모니터링 시료로 사용한 기초 연구로 비침습적인 생물학적 모니터링의 기초자료로 활용될 수 있을 것으로 판단된다.