• 대한토목학회논문집
• /
• 제28권1D호
• /
• pp.67-72
• /
• 2008

건설기계는 건설사업의 성공적인 수행을 위한 중요한 요인이다. 그리고 건설기계에 소요되는 비용이 건설공사비에서 차지하는 비중이 크다. 따라서 건설기계 비용의 산정은 건설계획 단계에서 중요한 업무이다. 이를 위해서 우리나라는 표준 품셈에 제시된 건설기계 시공능력 산정식을 이용하여 건설기계의 시간당 작업량을 계산하는 방식을 활용하고 있다. 그러나 건설기계의 성능은 개선되고 있으나 시공능력 산정식에서 활용되고 있는 작업효율은 이를 반영하지 못하는 실정이다. 이에 본 연구는 유압식 백호, 로우더, 덤프트럭을 대상으로 현장실사를 통해 작업효율을 실측하였다. 그 결과 백호와 로우더는 현재 활용중인 작업효율보다 현장실사 값이 높게 나타났으며, 덤프트럭은 낮게 나타났다. 본 연구결과를 바탕으로 건설기계의 작업효율 표준 산정식에 대한 정의가 수립되어야 하며, 체계적이고 장기적인 조사를 거쳐 작업효율의 개정이 필요할 것으로 사료된다.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.77-83
• /
• 2008

Semi-active cabin air suspension system improves driver's comfort by controlling the damping characteristics in accordance with driving situation. For the driver's comfort evaluation, test procedure has the two methodologies which are filed test and lab test. A field test method has a drawback. It requires a lot of time and money on repetitive test, due to the sensitivity of field test. On the other hand, the test with six axes simulation table at laboratory can obtain the repeatability of test, better than the field test method. In this paper, the procedures of ride performance test and control logic tuning with the table are presented. Drive files of the table can be represented with the almost same input condition as field test data. According to the result from the comparative test using six axes simulation table between passive and semi-active system by making ECU logic tuning, the RMS acceleration of semi-active cabin air suspension system was reduced by 29.6% compared with passive system.

• 대한조선학회논문집
• /
• 제59권5호
• /
• pp.323-329
• /
• 2022

This paper suggests an example guideline of a safety zone layout for the domestic LNG Truck-To-Ship (TTS) bunkering. The safety zone is one of the controlled area in LNG bunkering and its layout is required as a fundamental safety barrier. While the international standard provides a layout methodology of the safety zone, its detail application is not user-friendly and only possible with a level of the process engineering. In the domestic case, the enforcement regulations are applied for LNG bunkering but the safety zone is not properly defined for TTS operation. Considerations are made for the intuitive approach of the safety zone layout and an example guideline is suggested for application in the domestic TTS bunkering. A technical background of the guideline is described and its applicability is demonstrated with regard to the characteristics of TTS bunkering. The findings of the study are summarized in association with a practical layout of the safety zone, contributing to the safety culture in the domestic LNG bunkering.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권2호
• /
• pp.95-102
• /
• 2005

방사성폐기물을 저장하는 시설은 부지선정에 상당한 어려움과 많은 시간이 소요되고 있으며, 이러한 문제로 인하여 발전소내의 부지에 방사성폐기물의 수용용량을 증가시키는 방법이 단기적인 해결방안으로 고려되고 있다. 캐나다에서 개발한 사용후 핵연료 건식저장시스템을 국내에 도입하려는 노력이 진행중이다. 본 연구에서는 유한요소해석을 통하여 사용후 핵연료 건식저장시스템의 비정상운영 조건인 사용후 핵연료 이송차량의 충돌사고와 핵연료를 운반하는 플라스크 낙하사고에 대한 구조적 안전성을 검토하였다.

• 한국안전학회지
• /
• 제28권4호
• /
• pp.33-37
• /
• 2013

A forklift truck, commonly used for transporting heavy materials in manufacturing industries, etc., is a useful machine. However accidents occur frequently during the operation of the machine. In order to prevent accidents it is necessary to examine the current safety regulations on a forklift truck. Because the regulations have not revised for a long time, they do not reflect the rapidly changing environment of industries. Proposed revision of standard on articles for forklift trucks was presented after analysing the causes of occurred injuries, comparing domestic standards with international standards and examining the survey results. We analyzed the safety regulation articles and the injuries according to the type of work conducted with forklift. The major differences in safety regulations between Korea and the major foreign countries were investigated. The opinions of field workers on the safety regulations were surveyed using e-mail or interview. As a result, it was found that preventing workers from contacting with the forklift is very important. To prevent accident due to movement of a stopped forklift, actions are necessary to prevent slip of a forklift. Also supervision is required to make workers fasten safety belt and to prohibit workers from using a forklift for undesignated purpose.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.332-339
• /
• 2006

A leaf spring suspension has been widely used since it can carry big load and simplicity. But one major drawback is the poor ride performance because of the friction in the system and the high stiffness coefficient. To overcome these, air spring suspension can be used. The air spring suspension system can improve the ride of the heavy vehicle significantly and also it can adjust the height to the loading and unloading. A truck with the leaf suspension system is modified with the air suspension system and the performance of the vehicle is compared using the suggested method. The existing leaf suspension can be replaced with the air suspension system to improve the performance.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.181-189
• /
• 2000

The aerodynamic characteristics of large transport vehicle has become more and more important in recent vehicle design to improve driving performance in high speed cruising and raise the product valve with regard to a comfortable driving condition. Hence, detailed knowledge of the flow field around truck coner vane is essential to improve fuel efficiency and reduce the dirt contamination on vehicle body surface. In this study, three-dimensional flow characteristics around corner vane attached to truck cabin were computed for the steady, incompressible, and high speed viscous flow, adopting the RNG k-$\varepsilon$ turbulence model. In order to investigate the influence of configuration and structure of corner vane, computations were carried out for four cases at a high Reynolds number, Re=4.1$\times$106 (based on the cabin height). The global flow patterns, drag coefficient and the distributions such as velocity magnitude, turbulent kinetic energy around the corner vane, were examined. As a result of this study, we could identify the flow characteristics around corner vane for the variation of corner vane length and width. Also, suggest the improved structure to reduce the dirt contamination in cabin side.

• 한국안전학회지
• /
• 제31권5호
• /
• pp.149-157
• /
• 2016

This paper presents the traffic speed limit of heavy vehicles at each wind velocity region, which is based on their accident risk analysis under cross-wind. The variables for the accident risk analysis are overall height, overall length, intake weight, and friction coefficient of the road surface. It was confirmed from analysis results that the risk of overturning increased with higher overall height and length, and the risk of sliding decreased with higher intake weight. The risk of sliding was largest at the friction coefficient of 0.1, and the risk of overturning was lagest at friction coefficient more than 0.25. Finally, traffic speed limit was proposed by using the accident risk analysis.

• 동력기계공학회지
• /
• 제13권5호
• /
• pp.40-45
• /
• 2009

This article deals with the transient analysis using multi-flexible body dynamics of a trailer vehicle, which is passing a bump on the flat road. In order to investigate the transient dynamic behavior of the trailer, we developed an equivalent finite element model for the trailer and a vehicle dynamic model for the truck using multi-body dynamics. The driving condition considered here is set as the trailer vehicle passes a bump on the flat road in 7km/h. And we investigate the time histories of vertical load and deflections on connecting points between the trailer and truck during the vehicle passes a bump. Due to the dynamic load resulted from the driving condition, additional stress concentrations are found in the trailer and the suspension connecting points between the trailer and rear axles along with kingpin.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.77-82
• /
• 1999

대형 화물트럭의 차실 내에 높은 수준의 차바닥 진동을 수반한 높은 소음이 발생하였다. 측정 및 분석결과 문제의 진동 소음은 추진축의 회전 1차 및 2차 성분으로 나타났다. 진동 전달경로상의 구성계 및 구성요소들에 대해 모드해석과 실차 주행 모드 해석시험을 실시한 결과 드라이브라인 및 프레임의 공진주파수가 문제가 되는 소음진동 주파수와 거의 일치하였으며, 또한 캡의 실내음향 공진 모드가 문제되는 주파수에서 존재하였다. 실험결과에 따라 액슬과 액슬간의 축의 장착각도를 변경하여 가진력을 줄이고, 비틀림 동흡진기를 추진축에 장착하여 드라이브라인계 공진을 제어함으로써 문제의 시내진동소음을 현저히 개선하였다.