• The Journal of the Korean Society for Microbiology
• /
• v.11 no.1
• /
• pp.27-32
• /
• 1976

Sodium amylosulfate(SAS) has been reported to be an effective substance to inactivate the anti-bacterial activity of blood in blood culture media. The advantage of the use of SAS over sodium polyanethol sulfonate(SPS) is that it does not inhibit the growth of some bacteria! species which are known to be inhibited by SPS. As to S. typhi, SPS is reported to enhance the growth, however the effect of SAS on this organism is not known as yet. Using 43 strains of S. typhi, isolated from clinical materials, the authors tried to determine the effect of SAS on this organism. The methods used for this study were : the SPS and SAS paper disk I sensitivity test, tests on the growth in trypticase soy broth(TSB) with SPS and with SAS, and experimental blood culture in SPS and SAS incorporated TSB. The following results were obtined. 1). S. typhi strains with the turbidity of No. 0.5 tube of MacFarland nepherometer were inoculated onto Mueller-Hinton plate and 1mg disk of SPS and SAS were applied. After 24-hour incubation, none of the 43 strains showed inhibition zone by SPS disk, but all of them showed zones by SAS disk with a mean zone diameter of 9.5mm(Table 1). 2) Inocula consisting of one to 54 viable counts of 37 strains were inoculated into three different media; TSB with 0.05% SPS, TSB with 0.05% SAS and TSB alone. After 24-hour incubation the mean of the optical densities of each medium were 0.483, 0.482 and 0.459 respectively, showing that SAS does not inhibit the growth of S. typhi. Moreover it was shown that there was no correlation between the amount of inocula and growth(Table 2 and Fig. 1). 3). Each set of media in 5 ml amounts consisting of one tube of TSB with 0.05% SPS, one tube of TSB with 0.05% SAS and two tubes of TSB were inoculated with 8, 64. 640 and 6400 viable counts of bacteria. Then 0.5 ml of fresh normal blood was added to all tubes except for one tube of TSB. Macroscopic observation after 24 hour incubation showed a heavy growth in all tubes except for the tube of TSB plus blood, which showed only a light growth in the tube of the heaviest inoculum. This result clearly demonstrates that the growth of S. typhi is inhibited by some antibacterial activities of fresh blood, which are counter acted by SPS and SAS(Table 3). Between SPS and SAS, there was no significant difference found(Table 4 and Fig. 2). With all these results it can be postulated that the addition of SAS into a rountine blood culture media may raise the positivity of S. typhi isolation and shorten the incubation period.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.1
• /
• pp.77-85
• /
• 1992

Of the cadmium-tolerant 162 bacterial strains isolated from soils, river waters or active sludges of waste-water disposal plants in the Gyeongnam province a strain C1, which showed considerably higher growth rate in the agar plate containing 2000 ppm than any other strains isolated, was identified as a Pseudomonas putida or its similar strain when analyzed by taxonomical characteristics. Optimum pH and temperature for the growth of the P, putida were 7.0 and $30^{\circ}C$, respectively. This strain was resistant to antibiotics(ampicillin, chloramphenicol and streptomycin), and heavy metals(lithium, cupper, lead and zinc). This strain utilized salicylate, naphthalene or xylene as a sole carbon source. The rate of cadmium accumulation in P. putida cell was enhanced at low concentration of Cd in the growth media. The maximum cadmium absorption by this strain grown in 1 and l0ppm of Cd was respectively 78% and 60% 24 hrs after culture, but in 100 ppm Cd, 40% 48 hrs after culture. Addition of a non-ionic surfactant Triton X-100(0.1%) to the medium enhanced the accumulation of cadmium in the P. putida up to approximately 37%.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.4
• /
• pp.358-369
• /
• 2000

Shielded metal arc welding machines with AC transformer have been widely used for thin-plate welding applications. Because of being bulky, heavy and of tap-changing property, so the SMAW's are changing to new power electronic circuits such as inverter circuit in order to reduce the system size and also to improve the welding performances at input output sides. The PWM inverter arc welding machine with diode rectifier has better output welding performances but it is has the plentiful harmonics and the lower input power factor. To solve these problems, input current-controlled scheme is considered for PWM inverter arc welding system, and then total input power factor is maintained to be more than 99%. Also a new combined control is proposed which can control both instantaeous welding output voltage and current under constant power condition, and as a result the variations of instantaneous current and voltage can be reduced to very narrow range in the V-I curve relationship, and hence the variance of welding current and voltage become so reduced. In addition the spatter generated during welding process is greatly reduced up to 70%. And the overall effiency can be improved up to 10%, which becomes higher when the load is lower.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.15-21
• /
• 2015

Natural gas fuel has known to be very promising in terms of abundancy and economic value. Therefore it is widely treated as research topics in a variety field of production, storage and utilization. Natural gas has become one of the major sources for the power generation by using internal combustion engines(ICE). Development of natural gas fuel injection device should be preceded to realize a reliable natural gas fuel supply system for a MW class power generation reciprocating ICE. In this research, an injection valve which consists of solenoid and body part with a moving plate was designed and its dynamic performance was experimented in the engine-like environment. As a result of the experiments, linearity of flow rate was obtained and overall around 2ms of response time was observed at the pressure difference of 1bar. In addition, more than 100Liter/min(@2Hz) of gas flow rate was witnessed, which is expected to be adequate for the fuel supply system of a MW class natural gas engine.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1259-1266
• /
• 2022

Recently, due to the specialization of structural design standards and evaluation methods, the classification rules are being integrated. A good example is the common international rules (CSR). However, detailed regulations are presented only for the cargo hold area where the longitudinal load is greatly applied, and no specific evaluation guidelines exist for the bow and stern structures. Structural design of the mentioned area is carried out depending on the design experience of the shipbuilder, and because no clear standard exists even in the classification, determining the root cause is difficult even if a structural damage problem occurs. In this study, an engineering-based solution was presented to identify the root cause of representative cases of buckling damage that occurs mainly in the stern. Buckling may occur at the panel wall owing to hull girder bending moment acting on the stern structure, and the plate thickness must be increased or vertical stiffeners must be added to increase the buckling rigidity. For structural strength verification based on finite element analysis modeling, reasonable solutions for load conditions, boundary conditions, modeling methods, and evaluation criteria were presented. This result is expected to be helpful in examining the structural strength of the stern part of similar carriers in the future.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.81-81
• /
• 2020

Pneumonia is infection of air sacs in lungs by bacteria, viruses, fungi and abnormal atmosphere condition. That causes to inflammation and fills up with pus and fulid in air sacs. The symptoms of pneumonia are heavy cough, fever, shortness and rapid respiration and sputum with blood. Also, that remains sequela after the recovery. Thymus quinquecostatus (TQ) has a strong antibacterial effect. That has been used a natural medicine for bronchitis, asthma and nervous inflammation. In this study evaluated anti-inflammatory effects of TQ on IFN (interferon)-γ/TNF (tumor necrosis factor)-α (20 ng/ml) stimulation. MRC-5 cells were seeded at 1 × 10⁵ cells/well in a 24-well plate and stabilized overnight at 37℃. The cells were treated with various concentrations of TQ extracts (DW, 30, 50, 70, 95% EtOH, 0.1~100 mg/ml) for 4h, Subsequently IFN-γ/TNF-α (20 ng/ml) was added to each well and incubated over 12h. the production of inflammatory cytokines were measured by Enzyme-linked immunosorbentassay(ELISA) method. The absorbance was measured at 450 nm using microplate reader. The treatment with TQ extract at dose of 0.1 to 100 mg/ml did not show cytotoxicity in MRC-5 cells (showed cytotoxicity at 95% EtOH 100 mg/ml). The results demonstrated that stimulation of TNF-α/IFN-γ significantly increased the production of inflammatory mediators in the MRC-5 cells compared with unstimulated cells. By contrast, treatment with TQ extreats doses of 0.001 to 10 mM significantly suppressed the production of IL-6 and IL-8. Especially. The higher percent of ethyl alcohol extracts suppressed the production of inflammatory cytokines. This results are considered that essential oil of TQ is extracted according to ethyl alcohol percent. Therefore, TQ has potential to mitigate pulmonary disease that can be used a medicine for pneumonia

• Korean Journal of Food Science and Technology
• /
• v.46 no.1
• /
• pp.108-114
• /
• 2014

To analyze the hazards associated with cucumber and hot pepper cultivation areas, a total of 72 samples were obtained and tested to detect the presence of biological (sanitary indicative, pathogenic bacteria and fungi) and chemical hazards (heavy metals and pesticide residues). The levels of sanitary indicative bacteria (aerobic plate counts and coliforms) and fungi were ND-7.2 and ND-4.8 log CFU/(g, mL, hand, or $100cm^2$) in cucumber cultivation areas, and ND-6.8 and 0.4-5.3 log CFU/(g, mL, hand, or $100cm^2$) in hot pepper cultivation areas. More specifically, the soil of hot pepper cultivation areas was contaminated with coliforms at a maximum level of 5.6 log CFU/g. Staphylococcus aureus was detected only in glove samples at a level of 1.4 log CFU/$100cm^2$ and Bacillus cereus was detected in the majority of samples at a level of ND-4.8 log CFU/(g, mL, hand, or $100cm^2$). Listeria monocytogenes, Escherichia coli O157:H7, and Salmonella spp. were not detected. Heavy metal (Zn, Cu, Ni, Pb, and Hg) chemical hazards were detected at levels lower than the regulation limit. Residual insecticides were not detected in cucumbers; however, hexaconazole was detected at a level of 0.016 mg/kg (maximum residue limit: 0.3 mg/kg) in hot peppers.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.2 no.2
• /
• pp.125-137
• /
• 1997

To study the vertical variation of heavy metal and Rare Earth Element (REE) contents in deep-sea sediments, eighteen cores were sampled from the Korea Deep-sea Environmental Study (KODES)-96 area in the C-C zone (Clarion-Clipperton fracture zone), northeast equatorial Pacific. Sediment columns can be divided into three units based on sediment colors and geochemical characters; uppermost Unit I with brown color, middle Unit II with pale brown color and smaller Ni/Cu ratio than the ratio in Unit I, and lowermost Unit III with dark (brown) colors and higher contents of Mn, Ni, Cu, and REEs than those in Unit I and II. Unit II can be divided more into two layers of upper Unit IIa and lower Unit IIb. Unit IIb is characterized by high contents of Cu, 3+REEs (REEs except Ce), smectite, and severely deteriorated fossil tests. Unit III can also be divided into two units; upper Unit IIIa with dark brown color, and lower Unit IIIb with black color and enriched Mn and Fe. The KODES area was located near from the East Pacific Rise (EPR) When Unit III Sediments were deposited, considering the hiatus between Unit II and III (Quaternary-Tertiary boundary) and the spreading rate (10 cm/yr) and direction (north southern west) of the Pacific plate from the EPR. High contents of Mn and Fe in Unit IIIb may be related with hydrothermal influence from the EPR. Meanwhile, Unit IIb (about 2~3 Ma) and Unit III (11~30 Ma) layers were probably formed near (or under) the equatorial high productivity zone, and accordingly received a lot of organic materials. As a result, Cu and 3+REEs, closely associated with organic materials, are enriched in smectite and/or Ca-P composites (fish bone debrise, biogenic apatite) after decomposition and reprecipitation on the sea floor. Higher contents of Cu and 3+REEs in Unit IIb and III are suggested to be the result of abundant supply of organic substances in the equatorial high productivity zone.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.29-36
• /
• 2016

Recently, the studies about rock physics model (RPM) in shale reservoir are widely performed. In shale reservoir, the degree of the maturity can be estimated by kerogen and GOR (Gas-Oil Ratio). The researches on the rock physics model of shale reservoir with the amount of kerogen have been actively carried out but not with GOR. Thus, in this study, we analyzed the changes in seismic velocity and density, and AVO (Amplitude Variation with Offset) response depending on changes in GOR and the amount of kerogen. Since the shale consists of plate-like particles, it has vertical transverse isotropy (VTI). Therefore we estimated the seismic velocity and density by using Backus averaging method and analyzed AVO responses based on these estimated properties. The results of analysis showed that the changes in the velocity with the GOR variation are small but the velocity changes with the variation in kerogen amount are relatively larger. In case, GOR 180 (Litre/Litre) which is boundary between heavy oil and light oil, when volume fraction of kerogen increased from 5% to 35%, the P-wave velocity normal to the layering increased 51%. That is, it helps estimating maturity of kerogen through the velocity. Meanwhile, when rates of oil-gas mixture are large, the effect of GOR variation on the velocity change became larger. In case volume fraction of kerogen is 5%, the P-wave velocity normal to the layering was estimated $1.46km/s^2$ in heavy oil (GOR 40) but $1.36km/s^2$ in light oil (GOR 300). The AVO responses analysis showed class 4 regardless of the GOR and amount of kerogen because variation of poisson's ratio is small. Therefore, shale reservoir has possibility to have class 4.

• Korean Journal of Food Science and Technology
• /
• v.43 no.4
• /
• pp.413-418
• /
• 2011

This survey was conducted to monitor the safety of red ginseng products in Gwangju, in 2010. Among 100 samples, 37 were beverages, 5 were functional health foods on the market, and 58 were beverages from a tailor-made shop. All samples were negative for coliform bacteria. Aerobic plate counts were detected from 13 samples in the 58 tailor-made products but not detected in the other types of products. Benzoic acid was detected in 5 samples (range, 19.2-543.0 mg/kg). Among heavy metals, lead was detected, ranging from 28.8-62.3 ${\mu}g/kg$, cadmium, from 1.15-4.18 ${\mu}g/kg$, and mercury from 0.10-0.18 ${\mu}g/kg$. Benzopyrene was not detected in any samples. Ginsenoside Rg1 and Rb1 were detected in 0.1-23.4 mg/90 mL of beverages and 12.1-66.8 mg/90 mL of functional health foods. These results indicate that red ginseng products are safe in terms of microbial contaminants and hazardous chemical compounds such as heavy metals and benzopyrene.