• Journal of Korean Physical Therapy Science
• /
• v.16 no.3
• /
• pp.55-66
• /
• 2009

Background: The purpose of this research was to investigate the factors affecting the low back pain of workers in hospital. 214 subjects waking at two general hospitals in Yosu city participated in this survey. Subjects consisted of doctors, nurses, medical engineers, officers and general laborers. The survey data were collected by a written questionnaire which made out by themselves for 25 days, from fourth August to 29th August, 2008. Methods: The questionnaire consisted of four categories, general, occupational, working habitual and the daily living characteristics. The collected data were analyzed by Chi-square test based on the present or absent of low back pain. Results: 1. In the general characteristics, low back pain had no significant relationship to all factors, sex, ago, body mass index, weight and height. 2. In the occupational characteristics, the phase of distribution of low back pain had statistical significant differences in the working hours a week, satisfaction of pay, satisfaction of occupation(p<0.05). However low back pain did not significantly related to the kind of occupation, period of work and degree of stress. 3. In the habitual characteristics, low back pain was significantly influenced by working posture, frequency of using lumbar and heavy material lifting, monotonous repetition of working operation and noise(p<0.05). No significant difference was shown in the factor of convenience of chair. 4. In the daily living characteristics, low back pain shown the significant differences in walking time a day, status of health and smoking pattern(p<0.05). there were, however, no significant differences in the aspect of the kind of house and bed, sleeping attitude, driving, riding time on the vehicle, exercising, frequency of cultural life and drinking alcohol. Conclusion: when I see above resultants totally, it appears a higher incidence caused by working environment rather than living habit and then consequently compared to hospital workers, they also have high incidence like others. In order to reduce incidence of low back pain and enjoy the our life we need to educate ourselves preventing program for low back pain and try to effort for preventing of low back pain on each department and individual.

• Research in Community and Public Health Nursing
• /
• v.9 no.1
• /
• pp.213-222
• /
• 1998

The prevalence rate of low back pain in nurses is higher than that of other jobs, because there are many more risk factors(for example, standing postures, lifting and carrying heavy loads, transfering patients, changing a patient's position etc.). This investigation is to provide basic data for prevention of low back pain by analyzing the prevalence rate and related factors of low back pain in nurses(esp. operating room staff) in general hospitals. A self-reported questionaire survey was carried out on three hundred and five nurses of three general hospitals in Seoul from June, 1996 to August, 1996. Subjects of the survey were divided into a low back pain group(LBP) and a cotrol group to investigate the association between low back pain and the general characteristics and work related factors of each group. The results were as follows: 1. In the subjects of the survey, the prevalence rate of low back pain was 60.0% for the last year. 2. 73.6% of operating room(OR) staff complained of low back pain. 3. Standing for a long time and working in twisting postures were associated with low back pain, and so were the shift, the type of work, and the frequency of transfering patients. 4. The weight loads which nurses frequently carried were, under 5kg, 5-10kg, 15-20kg, 15-20kg, over 20kg, and all, except for 10-15kg, were associated with LBP. 5. 76.9% of the LBP experienced low back pain within 3 years after starting nursing jobs. 6. Concerning the degrees of low back pain: 75.8% was limited to waist; 18.8% reached the knees; 4.2% reached ankles. In conclusion, the prevalence rate of low back pain in general hospital nurses was associated with the works in operating room and other work related factors, therefore it is necessary to develop on educational program for the prevention of low back pain as well as and to improve working environments.

• Journal of the Korea Concrete Institute
• /
• v.28 no.2
• /
• pp.129-139
• /
• 2016

Cast-in-place concrete-filled hollow PC (HPC) columns are used to reduce lifting load of heavy-weight PC columns and to improve the structural integrity of joints. In the present study, a new type of HPC column was proposed to improve the productivity and structural integrity of the concrete. To form the hollow PC columns, a permanent inner form was prefabricated using structural deck plates and penetrated lateral bars. Half-scale specimens of four HPC columns were tested under combined axial compression and lateral cyclic loading to evaluate the seismic resistance. In the design of test specimens, various parameters such as the spacing of lateral re-bars, the use of steel fiber, and the thickness of PC cover were considered. The test results showed that the proposed HPC columns generally exhibited satisfactory load-carrying capacity and deformation capacity without brittle failure of PC. If closely spaced hoops or fiber reinforcements are used for PC, the deformation capacity can be improved further by restraining PC spalling.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.1
• /
• pp.103-109
• /
• 2009

Strong winds according to global warming cause the increase of the frequency and the repair cost of damaged roofs. In the United States, Factory Mutual Insurance Company(FMIC) promotes the roofing design that resists heavy wind-load, as the means of strict criteria. This fact reveals that more durable roofing system will be also required in Korea. Therefore, this study aims at developing such a system with high wind-resistance performance using Thermoplastic polyolefin(TPO) and Electromagnetic induction technology(EIT) than the previous systems. The system presented in this study consists of 4 main devices as follow; 1) a disc to fix sheets for TPO & EIT method, which can conduct structural design according to site condition, such as region, building height, and wind load. 2) a nail to have about 30% stronger lifting-up capacity than that of the previous nail. 3) a disc to fix sheets, which has triangle protuberance not to damage sheets in the repeatable wind load, and 4) a electromagnetic induction device to combine a disc and a sheet by heating uniformly and quickly adhesive agent on the disc. The results of mock-up test illustrate that the system provides wind-resistant performance to achieve satisfactorily the structural design criteria of FMIC. In addition, the system is faster, chipper, and easier than the existing system, and is expected that this roofing system can be applied to the rehabilitations of an existing as well as a new building.

• Journal of the Korean Institute of Navigation
• /
• v.23 no.2
• /
• pp.67-79
• /
• 1999

The purpose of this study is to provide basic date on the causes and factors related with the workload on board for Korea Seaman's Low Back Pain. The date had been acquisited through the questionaires of those and analysed in Korea Institute of Maritime and Fisheries Technology from February 10 to April 10 in 1999. The results of this study are as follows: 1. The incidence of Occupational low back pain for the recent 12 months has been recorded as 56.2% of the subject. 2. The highter Occupational satisfaction has the lower incidence of low back pain(p＜0.01). and the person who takes a rest(p＜0.05) and physical exercise regularly(p＜0.01) has lower experience of the incidence. 3. The incidence of low back pain by charateristics of vessel was turn out as 59.3% of the fishing vessel, 55.3% merchantmarine and 52.9% of the vessel of special purpose. The incidence of each department of a ship has recorded as 54.3% of Deck Dept. 59.2% of engine Dept but there was little relationship between those. And the longer period of work and on-board service has the hither incidence of the higher incdence(p＜0.01). 4. The fittness of the working table (p＜0.01) and chair(p＜0.01) has affeced the incidence of low back pain significantly 5. The higher incidence of low back pain has been experienced in case of working: in back posture, and lifting up or carrying a heavy load(p＜0.01) 6. The major cause of low back pain was turned out as excessive workload(26.5%) and stress (18.5%) ; the stress(24.1%) and excessive overwork(22.4%) for Deck dept. and excessive workload(32.3%) and bad position(21.7%) for Engine Dept(P＜0.01)

• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.163-171
• /
• 1998

Continuously contacting with camshaft the face of Valve Lifter made of cast iron brings about abnormal wear such as unfairwear or earlywear because it is heavily loaded in the valve train systems as the engine gets more powered. This abnormal wear becomes a defet namely over-clearance when the valve is lifting so that the fuel gas imperfectly combusted by unsuitable open or close aaction of the engine valve in the combustion chamber. The imperfect combustion in the end results in the major cause of air pollution and combustion chamber. The imperfectly combusted by unsuitable open or close action of the engine valve in the combustion chamber. The imperfect combustion in the end results in the major causes of air pollution and decrease of the engine output. Consequently to prevent this wear this study was to develop the valve lifter which is joined by brazing process with SCM435H and a tip by manufacturing the face as a superhardened which is joined by brazing process with SCM435H and a tip by manufacturing the face as a superhardened ceramics alloy which has high wear resistance. Having the excellent surface hardness with Hv1100-1200 the sintered body developed with superhardened alloy(WC) can endure the severe face loading in the valve train system. We experienced with various brazing alloys and obtained the excellent joining strength to the joint had 150MPa shear strength. Interface analysis and microstructure in a joint were examined through SEM & EDS Optical microscope. Also 2,500 hours high speed(3,000-4,000 rpm) and continuous (1step 12hr) engine dynamo testing was carried out to casting valve liter and ceramics-metal joint valve lifter so that the abnormal wears were compared and evaluated.

• Korean Journal of Occupational Health Nursing
• /
• v.22 no.2
• /
• pp.102-111
• /
• 2013

Purpose: This study was conducted to analyze the characteristics of work-related musculoskeletal diseases (MSD) and the factors for approving MSD by the parts of the body. Methods: The analysis was done using the data which were drawn from the Industrial Accident Compensation Insurance that is operated by the Korea Worker's Compensation & Welfare Service. The data were composed of total cases related to the work-related diseases from 2006 to 2009. In addition, MSD data input by an investigator were collected. The factors associated with MSD were analyzed using ${\times}2$ and multiple logistic regression. Results: MSD approved cases have increased since 2006 and the proportion of the approved work-related MSD cases in the workers with work-related diseases in 2009 were 33.4%. Spinal approved cases were the highest percentage and upper and lower extremities cases gradually increased. The factors for approving upper extremity were found to be age, company size, type of industry, working duration, and in the case of spine to be company size and heavy lifting. Conclusion: Work-related MSD have increased and the factors that affected MSD by the parts of the body varied. Management strategy must be established to prevent MSD by the parts of the body.

• Journal of Biosystems Engineering
• /
• v.42 no.4
• /
• pp.235-241
• /
• 2017

Purpose: It is to develop an agricultural three-directional dumping vehicle that can help farmers reduce intensive labor when carrying heavy loads and for easy dumping. In addition, a novel mechanism was applied for controlling the direction of the tilting cargo box by using a single hydraulic cylinder and simple apparatus. The overturning safety was analyzed to provide safe-use ground slope region of the vehicle to be used at upland fields and orchards. Methods: The developed three-directional dumping vehicle was constructed using a cargo box, vehicle frame, driving components, lifting components, and controller. The novel mechanism of controlling the dumping direction involves the operation of two latching bars, which selectively release or collapse the connecting edge between the vehicle frame and cargo box. A multibody dynamics analysis software (RecurDynV8R5) was used to determine the safe-use ground slope area when tilting the cargo box at slopes. A computer analysis was conducted by increasing the ground slope while rotating the vehicle when the cargo box comprised loads of 300 and 500 kg and stacking heights of 40 and 80 cm, respectively. Results: The three-directional dumping vehicle was successfully manufactured, and the cargo box was tilted at $37^{\circ}$ and $35^{\circ}$ for dumping forward and sideways. The latching bars were manually and selectively collapsed with the vehicle frame to control the dumping direction. When forward dumping, the safe-use ground slope was over $20^{\circ}$ in all vehicle directions and loaded conditions. Conclusions: A three-directional dumping vehicle was developed to reduce labor-intensive work in the farming environment. The user can easily control the dumping direction by using the control panel. The vehicle was safe to be used in most of the Korean upland fields and orchards (area over 96%) for the forward dumping.

• The Journal of Korea Robotics Society
• /
• v.12 no.4
• /
• pp.441-447
• /
• 2017

Robot arms are being increasingly used in various fields with special attention given to unmanned systems. In this research, we developed a high payload dual-arm robot, in which the forearm module is replaceable to meet the assigned task, such as object handling or lifting humans in a rescue operation. With each forearm module specialized for an assigned task (e.g. safety for rescue and redundant joints for object handling task), the robot can conduct various tasks more effectively than could be done previously. In this paper, the design of the high payload dual-arm robot with replaceable forearm function is described in detail. Two forearms are developed here. Each of forearm has quite a different goal. One of the forearms is specialized for human rescue in human familiar flat aspect and compliance parts. Other is for general heavy objects, more than 30 kg, handling with high degree of freedom more than 7.

• Journal of Acupuncture Research
• /
• v.18 no.2
• /
• pp.227-236
• /
• 2001

Objectives : This study was performed to evaluate the clinical results of the thoracolumbar fracture patients treated with oriental medical methods. Methods : We reviewed 40 patients of thoracolumbar fracture, who were hospitalized at WonKwang University KwangJu Oriental Medical Hospital and treated by oriental medical methods. We classified thoracolumbar fracture according to three column theory and then analyzed the cause of injury, sex-age distribution, treatment, and etc.. Results : 1. The distribution showed female predominance(72.5%) in sex and 70age-bracket predominance in age. 2. In the distribution of causes, the largest group was "lifting heavy objects"(40%) and the next was "slip down"(37.5%). 3. In the duration of symptoms, the largest group was the group of "acutest" (40%). 4. The distribution of injured level was L1 body the most(20%). 5. In classification of fracture, "compression fracture" was the most(57.5%) and the next was "burst fracture", "unstable fracture" in order. 7. Therapeutic effects above "fair" were 37 cases(92.5%). 8. The higher grade of clinical symptoms is, the lower therapeutic effect is. 9. In the distribution of treatment results according to classification of fracture, both the compression fracture and the burst fracture were almost same high and the unstable fracture is relatively lower than them. Conclusions : The result to treating thoracolumbar fracture by oriental medical methods is satisfactory.