• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.60-67
• /
• 2002

A precise measurement of field test was performed to estimate the thermal performance of the forced convection electric air heater by experiment. Air temperature, flow rate and electrical power input were measured with the related measurement sensors, and acquisition methods for the measured data were studied to estimate the thermal performance of the tested air heater effectively. To determine the mean air temperature at the flow cross-section, measuring positions were chosen by considering the flow velocity profile and the equally divided cross-sectional area. From the experimental results, thermal efficiency was obtained accurately as an indication of the tested heating system performance.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.47-48
• /
• 2006

Oridinal thermal spray process has developed into two ways, namely, temperature dominated represented by plasma spraying, and velocity dominated represented by HVOF. It is common for both that the particle materials sprayed are basically in melted or half melted condition. New process has developed recently, that is, Cold Spray and Aerosol Deposition. Particle's heating is limited in CS lower than half of the material's melting point. Moreover, exactly no heating is loaded in AD process. Through the investigation on common feature for these three spraying processes, potential of new material process - Particle Deposition, PD - is considered and proposed.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제16권3호
• /
• pp.169-180
• /
• 2012

The steady hydromagnetic flow of an electrically conducting non-Newtonian fluid due to the rotation of an infinite disk is studied with heat transfer with the inclusion of the ion slip as well as Ohmic heating. The governing nonlinear momentum equations and energy equations are solved using the finite difference method. The numerical results indicate the important effect of the ion slip and the non-Newtonian fluid characteristics on the velocity and temperature distributions.

• 한국식품조리과학회지
• /
• 제31권1호
• /
• pp.33-40
• /
• 2015

For the globalization of Korean food restaurants, the kitchens should be equipped with proper ventilation systems and space to keep clean and ensure food safety. This study aimed to examine the ratio of kitchen to total space of restaurant and the suitability of the ventilation systems employed at Korean food restaurants. Data were collected by on-site survey of 12 Korean foods restaurants in Seoul. Length and width of the restaurants were measured with scale. Temperatures and air velocity around the heating equipment, working area, and hood were measured with a thermal imaging camera anemometer and thermometer. Statistical analyses were conducted with the SPSS program. The average space of the restaurants was $25.7m^2$. The ratio of kitchen to space was 0.22 for restaurants sized $32m^2$, 0.28 for $33-66m^2$, 0.21 for $66.1-99m^2$, 0.16 for $99.1-148.5m^2$, and 0.35 for those above $148.5m^2$. Average maximum and minimum air velocity around the hood were 0.28 m/sec and 0.22 m/sec, respectively. Under these conditions, the temperature of the working area was $41^{\circ}C$, presenting an uncomfortable indoor temperature for kitchen employees to work. When classifying 3 groups based on the minimum and maximum air velocity, the temperatures near the cooking area and in the hood of the restaurants showed significant differences among the three groups. When the maximum air velocity was over 0.3 m/sec, the temperature of the cooking area was as $30.1^{\circ}C$, showing a significantly lower temperature (p<0.01). Based on these results, the kitchen space rate of 0.25 to the total space and a ventilation system maintaining a maximum air velocity over 0.3 m/sec were recommended for ensuring the food safety of Korean foods restaurants sized 66 to $99m^2$.

• 생물환경조절학회지
• /
• 제14권3호
• /
• pp.166-173
• /
• 2005

길이 40m,폭 5.5m의 단일피복 구조의 8연동 무가온하우스 상단부에 설계적설심 19.1 cm의 눈이 쌓인다는 조건과 시설 측면으로 설계풍속 $36.6\;m{\cdot}s^{-1}$의 바람이 분다는 조건 그리고 참고자료로 활용하기 위해 적용한 최대적설심 37.8cm의 눈이 쌓인다는 조건과 순간최대풍속 $60.0\;m{\cdot}s^{-1}$의 강풍이 분다는 조건에서 유동 및 구조강도 해석을 수행하였다. 적설하중 조건에서는 설계적설심 19.1 cm와 최대적설심 37.8cm에서 파이프에 걸리는 최대응력이 각각 $53.8\;N{\cdot}mm^{-2}$과 $107\;N{\cdot}mm^{-2}$으로 재료의 허용응력 보다 작은 것으로 나타나 안전한 것으로 분석되었으나, 설계풍속 $36.6\;m{\cdot}s^{-1}$와 순간최대풍속 $60.0\;m{\cdot}s^{-1}$의 풍하중 조건에서는 파이프에 걸리는 최대응력이 각각 $250\;N{\cdot}mm^{-2}$과 $672\;N{\cdot}mm^{-2}$으로 재료의 허용응력을 모두 초과하여 플라스틱하우스가 불안전한 것으로 분석되었다.

• 한국지능시스템학회논문지
• /
• 제23권2호
• /
• pp.107-112
• /
• 2013

본 논문에서는 고압용 정지형 무효전력 보상장치의 스위칭 모듈의 속도 제어 및 온도 제어 기법을 제안한다. 지속적인 전력 수요의 증가에 따른 발전 설비 및 송 배전설비의 신규 건설이 요구되고 있으며, 전력수송설비의 신 증설로 전력수송로의 병목현상에 따른 문제점이 나타나고 있다. 따라서 기존설비의 이용률을 극대화하고, 신규건설 없이 송전용량을 증대시키는 방안이 연구 되고 있다. 기존의 정지형 무효전력 보상장치 제어 방식에서는 전원입력회로에서 전위 검출하여 SCR를 직접 스위칭 동작하게 되어 있어서 노이즈가 발생하게 된다. 제안한 방법은 SCR 양단의 전위차를 바탕으로 스위칭 제어하여 스위칭 속도가 향상되고 노이즈가 감소하게 된다. 또한 스위칭 속도 증가로 발생하는 발열을 실시간 온도 제어함으로 안정성을 향상하였다. 실제 실험 환경을 구성하여 제안한 고압용 정지형 무효전력 보상장치의 속도 및 온도 제어를 실험하고, 실제 현장에서 성능을 검증하였다. 제안한 고압용 정지형 무효전력 보상장치의 스위칭 모듈을 통한 온도 제어를 실험하고, 실제 현장에서 성능을 검증하였다.

• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.341-348
• /
• 1995

An analysis of the use of temperature profiles in the determination of the kinetic parameters of combustion synthesis of Ti5Si3 were investigated. From profile analysis, an apparent activation energy of 12KJ/mol was calculated. The Maximum heating rate achieved during 10wt% Ti5Si3 reaction by the product dilution method was approximately $1.5\times$104 K/s. Coupling this value with the measured wave velocity of 7.02 cm/s yields a maximum thermal gradient of 2.14$\times$103 K/cm. The value of tr (=t*) was calculated to be 1.2$\times$10-1 s and the value of td (=tx) was calculated to be 32.89 s. Using the definition of t* and the measured wave velocity, the effective thermal diffusivity, $\alpha$, was calculated to be 0.59$\times$10 $\textrm{cm}^2$/s. From these analysis, the power function, G, was also calculated.

• 한국유체기계학회 논문집
• /
• 제5권4호
• /
• pp.19-25
• /
• 2002

The flow characteristics in a bifurcated duct are investigated experimentally. Physical properties such as mean velocity vectors, mean vorticity, and total pressure distributions are obtained for three different Reynolds numbers (578, 620, 688) using PIV measurements and CFD analysis. Also, two different dividing ducts ($90^{\circ},\;60^{\circ}$) were selected for study. The results of this study would be useful to the engineers designing flow systems for heating, ventilation, air conditioning and waste-water purification plants.

• 비파괴검사학회지
• /
• 제31권2호
• /
• pp.111-117
• /
• 2011

Vibration monitoring is required for reliable thermosonic testing to decide whether sufficient vibration is achieved in each test for the detection of cracks. From a practical point of view, a cheaper and convenient monitoring method is better for the application to real tests. Therefore, the performance of different sensors for vibration monitoring was investigated and compared in this study to find a convenient and acceptable measurement method for thermosonics. Velocity measured by a laser vibrometer and strain provide an equivalent HI when measured at the same position. The microphone can provide a cheaper vibration monitoring device than the laser and the heating index calculated by a microphone signal shows similar characteristics to that calculated from velocity measured by the laser vibrometer. The microphone frequency response shows that it underestimates high frequency components but it is applicable to practical tests because it gives a conservative value of HI.

• 한국대기환경학회지
• /
• 제19권6호
• /
• pp.773-787
• /
• 2003

There are variations in the temperature Held due to urban heat island and anthropogenic heating so that regional scale meteorological field is changed. Therefore we simulate and predict the regional climate change according to surface characteristics through regional meteorological model. This study investigates the regional meteorological field by urbanization that influences in local circulation system using CSU-RAMS and simulates dry deposition velocity (V$_{d}$) using PNU/DEM which includes surface characteristics (such as albedo, surface hydrology and rough-ness length etc.) with calculated meteorological field. During the summer, horizontal distributions of V$_{d}$ were simulated using CSU-RAMS and PNU/DEM at Busan metropolitan area. The estimated values of V$_{d}$ were larger in forest and agricultural areas than water areas since ozone with low water solubility is destroyed slowly at wet surface or water.water.