• Journal of Bio-Environment Control
• /
• v.22 no.1
• /
• pp.35-41
• /
• 2013

This study was conducted to provide data necessary for reducing the condensation on greenhouse covering in winter season. The variation of VPD (Vapor Pressure Deficit) and condensation flux was analyzed in experimental tomato greenhouse. VPD values in experimental plastic greenhouse were greater than 0.2 kPa of disease prevention threshold, and lower than 0.5 kPa of threshold for dehumidification. The surface temperature of inside covering was slightly higher than the average temperature of outside and above curtain, and changed according to outside temperature. The humidity above curtain was nearly 100% and good condition for condensation. The humidity below curtain was 75~90% and comparatively stable condition for growing. The condensation flux value in experimental greenhouse corresponded with result of Seginer and Kantz (1986).

• Korean journal of food and cookery science
• /
• v.18 no.5
• /
• pp.476-481
• /
• 2002

The Physical and sensory characteristics of muffins prepared with flavonoids such as ferulic acid and p-hydroxybenzoic acid were evaluated for the development of functional foods using these flavonoids. The solubilities of ferulic acid and p-hydroxybenzoic acid were over 1% in water and the solutions showed a good thermal stability. However, 1% ferulic acid and p-hydroxybenzoic acid solution showed a color change during heating. The volume and maximum height of the control muffin were the greatest among the muffin groups. The volume of the muffins decreased with the increase of flavonoid concentration. The volumes of muffins with p-hydroxybenzoic acid were smaller than those of muffins with ferulic acid. The L, a and b values on crust and crumb of the muffin groups were not significantly different. The chemical flavor, bitterness and after taste of the muffins prepared with ferulic acid were stronger than those of the control muffins. Savory flavor and sweetness of the muffins with ferulic acid were weaker than those of the control muffins. The muffins with p-hydroxybenzoic acid were not significantly different from the control muffins in the appearance, flavor, taste, texture and overall acceptability. These results demonstrated that p-hydroxybenzoic acid may be useful as an additive to muffin.

• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.439-444
• /
• 1990

Fourteen varieties of soybeans grown in Korea were investigated for their chemical composition, yields and organoleptic properties of soybean curd. The soybean curd was prepared by soaking, grinding and heating of soybeans followed by filtration, coagulation with $CaSO_4$ and pressing. The proximate analysis showed that soybean curd had the moisture content of $75.0{\sim}82.0%\;and\;48.6{\sim}56.1%\;protein,\;14.8{\sim}40.4%\;lipids\;and\;6.4{\sim}26.8%$ carbohydrate by dry weight basis. The yield of volume total solids and protein from 100g of soybeans were $182.2{\sim}227.5cm^3,\;42.65{\sim}55.60%\;and\; 57.90{\sim}76.50%$, respectively. Among the 14 varieties, the highest volume yield was obtained from Suwon-141 which has the highest contents of moisture, carbohydrate and the lowest in lipids of soybean curd. The curd prepared with Baegun and Jangyeob contained relatively low values in moisture, protein and carbohydrate and yielded the lowest in volume yield. Therefor moisture, protein and carbohydrate contents in soybean curd affected greatly on volume yield. The organoleptic properties of odor and taste couldn't find any significant relationship with chemical composition of soybean curd eventhough there were some difference in their intensities among varieties.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.6
• /
• pp.379-386
• /
• 2008

Calcined clay granules (pellet) have been used as a soil conditioner. The space among the pellets can secure drainage of water in soil and, simultaneously, can keep water for plants in the inner pore of that. However, the usage of the pellet has been restrained because fabrication of that requires a high energy and cost for heating over the temperate of $1000^{\circ}C$. Recently, SCS(Self-propagating Combustion and Sintering) method was developed and this method use the combustion energy of the preliminary mixed combustible. The SCS method is suitable to fabrication of small porous aggregate and requires a very low cost. This research applied the SCS method to coal refuses for fabrication of soil conditioner pellets. The coal refuses were pulverized under the size of $100{\mu}m$ and the pulverized powders were pelletized to the size of 4~6mm. The pellets were heated at the temperature of $1200^{\circ}C$ in the SCS furnace that was specially prepared for this research. Characteristics of the pellets were investigated and were compared with that of ordinary calcined clay pellet of kaolin; porosity, pore size distribution, bulk density, pH and etc.. Characteristics of the moisture retention in the pellets were measured by the centrifugal method: ASTM D425-88. The pellets of the coal refuses showed the higher values of the field capacity and the plant-available water than that of kaolin pellet. These results suggest the very low cost process that can utilize the coal refuses and can fabricate the lightweight porous soil conditioner of the very high plant-available water.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.1
• /
• pp.18-28
• /
• 2014

Renewable Portfolio Standards(RPS) is a regulation that requires a renewable energy generated from eco-friendly energy sources such as biomass, wind, solar, and geothermal. The RPS mechanism generally is an obligatory policy that places on electricity supply companies to produce a designated fraction of their electricity from renewable energies. The domestic companies to supply electricity largely rely on wood pellets in order to implement the RPS in spite of undesirable situation of lack of wood resources in Korea. This means that the electricity supply companies in Korea must explore new biomass as an alternative to wood. Palm kernel shell (PKS) and empty fruit bunch (EFB) as oil palm wastes can be used as raw materials used for making pellets after their thermochemical treatment like torrefaction. Torrefaction is a pretreatment process which serves to improve the properties including heating value and energy densification of these oil palm wastes through a mild pyrolysis at temperature typically ranging between 200 and $300^{\circ}C$ in the absence of oxygen under atmospheric pressure. Torrefaction of oil palms wastes at above $200^{\circ}C$ contributed to the increase of fixed carbon with the decrease of volatile matters, leading to the improvement of their calorific values over 20.9 MJ/kg (=5,000 kcal/kg) up to 25.1 MJ/kg (=6,000 kcal/kg). In particular, EFB sensitively responded to torrefaction because of its physical properties like fiber bundles, compared to PKS and hardwood chips. In conclusion, torrefaction treatment of PKS and EFB can greatly contribute to the implement of RPS of the electricity supply companies in Korea through the increased co-firing biomass with coal.

• Journal of Energy Engineering
• /
• v.12 no.1
• /
• pp.49-57
• /
• 2003

Approx. 200.000 bpd vacuum residue oil is produced from oil refineries in Korea, and is supplied to use asphalt, high sulfur fuel oil and for upgrading at the residue hydro-desulfurization unit. Vacuum residue oil has high energy content, however its high sulfur content and high concentration of heavy metals represent improper low grade fuel. To meet growing demand for effective utilization of vacuum residue oil from refineries, recently some of the oil refinery industries in Korea, such as SK oil refinery and LG Caltex refinery, have already proceeded feasibility study to construct 435~500 MWe IGCC power plant and hydrogen production facilities. Recently, KIER (Korea Institute of Energy Research) are studying on the Vacuum Residue gasification process using an oxygen-blown entrained-flow gasifier. The experiment runs were evaluated under the reaction temperature: 1.100~l,25$0^{\circ}C$, reaction pressure: 1~6 kg/$\textrm{cm}^2$G, oxygen/V.R ratio: 0.8~0.9 and steam/V.R ratio: 0.4~0.5. Experimental results show the syngas composition (CO+H$_2$): 85~93%, syngas flow rate: 50~l10 Nm$^3$/hr, heating value: 2,300~3,000 k㎈/Nm$^3$, carbon conversion: 65~92, cold gas efficiency: 60~70%. Also equilibrium modeling was used to predict the vacuum residue gasification process and the predicted values were compared reasonably well with experimental data.

• Applied Biological Chemistry
• /
• v.48 no.4
• /
• pp.400-403
• /
• 2005

The effect of far-infrared (FIR) irradiation and heat treatment on the antioxidant activity of extracts from defatted soybean meal (DSM) was evaluated. DSM were placed in pyrex petri dishes (8.0 cm diameter) and irradiated at $150^{\circ}C$ for 5, 10, 15, 20, 40 or 60 min with a FIR heater or simple heater. After FIR irradiation or simple heat treatment at same conditions, methanol extracts of DSM were prepared and total phenol contents (TPC), radical scavenging activity (RSA) and reducing power of the extracts were determined. The antioxidant activities of the extracts increased as the time of heating or FIR-irradiation increased. When DSM were FIR-irradiated at $150^{\circ}C$ for 15 min, the values of TPC, RSA, and reducing power of the extracts increased from 31.62 mg/ml to 57.51 mg/ml, 11.6% to 53.1%, and 0.068 to 0.147, respectively, compared to the untreated controls. Simple heat treatment of DSM under the same conditions ($150^{\circ}C$ for 15 min) also increased the TPC, RSA, and reducing power of the extracts from to 58.04 mg/ml, 65.2% and 0.160, respectively. The results indicated that appropriate FIR-irradiation or heat treatment on DSM increased the antioxidant activities of methanolic extracts.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.1
• /
• pp.50-58
• /
• 2013

This study was carried out to evaluate the geospatial characteristics of blooming date migration in three major spring flowers across North and South Korea as influenced by climate change. A thermal time-based phenology model driven by daily maximum and minimum temperature was adjusted for the key parameters (i.e., reference temperature, chilling requirement, heating requirement) used for predicting blooming of forsythia, azaleas, and Japanese cherry. The model was run by the RCP 8.5 projected temperature outlook over the Korean Peninsula and produced the mean booming dates for the three climatological normal years in the future (2011-2040, 2041-2070, and 2071-2100) at a 12.5 km grid spacing. Comparison against the observed blooming date patterns in the baseline climate (1971-2000) showed that there will be a substantial acceleration in blooming dates of the three species, resulting in cherry booming in February and flowers of azaleas and forsythia found at the top of mountain Baikdu by the 2071-2100 period. Flowering dates of the three species in the near future (2011-2040) may be accelerated by 3-5 days at minimum and 10-11 days at maximum compared with that in the baseline period (1971-2000). Those values corresponding to the middle future (2041-2070) can be from a minimum of 9-11 days to a maximum of 23-24 days. Blooming date of Japanese cherry can be accelerated by 26 days on average for the far future (2071-2100). The acceleration seems more prominent at islands and coastal plain areas than over inland mountainous areas.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.1
• /
• pp.40-49
• /
• 2013

Current service system of the Korea Meteorological Administration (KMA) for blooming date forecasting in spring depends on regression equations derived from long term observations in both temperature and phenology at a given station. This regression based system does not allow a timely correction or update of forecasts that are highly sensitive to fluctuating weather conditions. Furthermore, the system cannot afford plant responses to climate extremes which were not observed before. Most of all, this method may not be applicable to locations other than that which the regression equations were derived from. This note suggests a way to replace the location restricted regression equations with a thermal time based phenology model to complement the KMA blooming forecast system. Necessary parameters such as reference temperature, chilling requirement and heating requirement were derived from phenology data for forsythia, azaleas and Japanese cherry at 29 KMA stations for the 1951-1980 period to optimize spring phenology prediction model for each species. Best fit models for each species were used to predict blooming dates and the results were compared with the observed dates to produce a correction grid across the whole nation. The models were driven by the KMA's daily temperature data at a 5km grid spacing and subsequently adjusted by the correction grid to produce the blooming date maps. Validation with the 1971-2012 period data showed the RMSE of 2-3 days for Japanese cherry, showing a feasibility of operational service; whereas higher RMSE values were observed with forsythia and azaleas.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.16-23
• /
• 2006

This paper presents a novel single-stage high frequency resonant inverter link type DC-DC converter using zero voltage switching with high power-factor. The proposed topology is integrated half-bridge boost rectifier as power factor corrector(PFC) and half-bridge high frequency resonant converter into a single-stage. The input stage of the half-bridge boost rectifier works in discontinuous conduction mode(DCM) with constant duty cycle and variable switching frequency. So that a boost converter makes the line current follow naturally the sinusoidal line voltage waveform. Simulation results have demonstrated the feasibility of the proposed high frequency resonant converter. Characteristics values based on characteristics analysis through circuit analysis is given as basis data in design procedure. Also, experimental results are presented to verify theoretical discussion. This proposed inverter will be able to be practically used as a power supply in various fields as induction heating applications, fluorescent lamp and DC-DC converter etc.