• 제목/요약/키워드: Heating value

검색결과 1,240건 처리시간 0.026초

생활폐기물매립장에서의 RDF 적응가능성에 대한 연구 (Study on applicability of RDF in Municipal Waste Landfill Site)

  • 김정권
    • 한국환경과학회지
    • /
    • 제18권10호
    • /
    • pp.1181-1187
    • /
    • 2009
  • Results for application of RDF(Refuse Derived Fuel) to selected wastes in metropolitan and small and medium cities are as follows. The physical characteristics of waste are paper, plastic, food waste, and so on. The proximate analysis in P city showed 20.2% of moisture, 71% of combustible material, and 8.8% of ash on annual average. That in G city showed 31.6% of moisture, 59.5% of combustible material, and 8.9% of ash. Ultimate analysis in P city showed 52.04% of carbon, 7.02% of hydrogen, 28.80% of oxygen, 0.66% of nitrogen, and 0.09% of sulfur. Heating value was 3,363 kcal/kg. Ultimate analysis in G city showed 50.85% of carbon, 6.56% of hydrogen, 29.86% of oxygen, 0.79% of nitrogen, and 0.12% of sulfur. Heating value in the G city was somewhat lower than that in the P city with 2,632 kcal/kg. Thus, application of RDF in metropolitan city was more effective than that in small and medium cities. Heating value in mixture for the P city was lower than that in waste of the volume rate waste charge system alone by 143 kcal/kg. In proximate analysis, moisture, and combustible material were likely to be more adequate to RDF.

A Fuel Feasibility Study of Sewage Sludge by Melting of Thermoplastic Polyethylene

  • Lee, Byeong-Kyu;Jeong, Wang-Seok
    • 한국환경과학회지
    • /
    • 제19권1호
    • /
    • pp.9-16
    • /
    • 2010
  • This pilot study evaluated fueling feasibility of sewage sludge, which contains a large amount of water content, by applying melting of thermoplastic polyethylene (PE). This study has identified a simultaneous achievement of drying and heating value improvement of the sewage sludge. The sewage sludge collected from a sewage sludge treatment plant during a winter period had a water content of 83.7 wt%, a combustible volatile content of 12.5 wt%, and an ash content of 3.8 wt%. The higher heating value (HHV) of the dried sewage sludge, before impregnation or coating of PE, was 4,600 kcal/kg. The collected sewage sludge was immersed into the melted PE solution, which had a HHV of 11,070 kcal/kg, and kept immersing with increasing reaction time. As the reaction (immersing or coating or impregnation) time increased, the water content of the sludge decreased. However, the HHV of the sludge increased with increasing the reaction time. The HHVs of the sewage sludge immersed or dipped into the melted PE solution for 15 min ranged from 6,780 to 8,170 kcal/kg with water content less than 7 wt%. This result indicates the melted PE solution can be utilized as an improvement technology for dryness and heating value of the sewage sludge with high water content. The sewage sludge impregnated or coated with melted PE can be utilized as potential fuel or energy resources.

Change of Heating Value, pH and FT-IR Spectra of Charcoal at Different Carbonization Temperatures

  • Kwon, Sung-Min;Jang, Jae-Hyuk;Lee, Seung-Hwan;Park, Sang-Bum;Kim, Nam-Hun
    • Journal of the Korean Wood Science and Technology
    • /
    • 제41권5호
    • /
    • pp.440-446
    • /
    • 2013
  • To understand transition characteristics from wood to charcoal, Quercus variabilis wood was carbonized at 200, 250, 300, 340, 540 and $740^{\circ}C$, respectively. Heating value, pH and surface property by FT-IR spectroscopy of the carbonized charcoal were investigated. Heating value and pH increased with increasing carbonization temperature from 4500 cal/g and 4.3 of the control wood to 8,000 cal/g and 9 of the charcoal carbonized at $740^{\circ}C$, respectively. From FT-IR spectroscopy, the peaks from O-H, C-H and C-O stretching disappeared during carbonization at 540 and $740^{\circ}C$. Aromatic skeletal vibration at near $1,506{\sim}1,593cm^{-1}$ was repidly increased until $540^{\circ}C$. These results suggest that the chemical and physical characteristics of wood components in cell wall can be easily changed by increasing carbonization temperature and the carbonization seem to be incomplete at temperature below $540^{\circ}C$.

LFG 혼합연료의 화염 안정화 특성 (Characteristics of Flame Stabilization of the LFG Mixing Gas)

  • 이창언;황철홍;김선호
    • 대한기계학회논문집B
    • /
    • 제26권2호
    • /
    • pp.328-335
    • /
    • 2002
  • In this study, experiments were performed to investigate the characteristics of flame stabilization of the LFG mixing gas. LFG has merely half heating value compared with liquified natural gas but can be greatly utilized as a commercial fuel. In order to use LFG in practical combustors, Webbe Index and heating value of LFG mixing gas were adjusted by mixing LPG with LFG. The comparisons were conducted between CH$_4$and LFG mixing gas for searching the region of flame stabilization based upon the flame blowout at maximum fuel stream velocity. As a result, the flame stability of LFG mixing gas was not improved with that of CH$_4$in non-swirl and weak swirl diffusion flame. However, LFG mixing gas had wide flame stabilization region rather than CH$_4$with increasing ambient flow rate in strong swirl. It was also found that flame stability was affected by included quantity of inert gas such as CO$_2$in the weak swirl but by heating value of fuel in strong swirl.

조립과 확장이 가능한 반도체 제조용 기판 가열 장치 (An Assemble and Expandable Substrate Heating Apparatus for the Semiconductor Manufacturing)

  • 정순원;구경완
    • 전기학회논문지P
    • /
    • 제58권1호
    • /
    • pp.67-71
    • /
    • 2009
  • This research is a new structure of the semiconductor substrate heating apparatus in which the assembly and expansion are possible. The fast thermo-responsive according to the direct heating structure of the heating plate layer adhering closely to the floor side of a substrate and the fast heat loss minimization can be accomplished. Moreover, the contact area of the sheath heater, which is the heating plate layer built-in heating apparatus, is increased, so that it has more heating valid area. There is no problem with the deformation interpreted in the state where it assembles the block of a several of the simulation result structure, the safety, and the stress. In addition, it is confirmed that building a large-size heating block is possible since the temperature deflection of the manufactured plate is lower than the standard value.

천연가스 열량 변화에 따른 GHP 엔진의 성능 및 배출가스 특성 (Performance and Emission Characteristics of GHP Engine at Different Natural Gas Heating Value)

  • 이중성;유현석;최정환;최의광;이경호;이병대
    • 한국가스학회지
    • /
    • 제19권1호
    • /
    • pp.1-5
    • /
    • 2015
  • 가스엔진구동 히트펌프(GHP : Gas Engine Driven Heat Pump)의 연료인 천연가스의 열량이 감소함에 따라 국내에서 생산되는 GHP에 미치는 영향을 평가하였다. 저열량가스($9,800kcal/Nm^3$)를 연료로 사용하여 엔진 단체 실험 및 GHP 현장평가를 실시한 결과 약간의 출력감소가 확인되었으나 시동성, 운전안정성, 배출가스 특성 등은 거의 변화가 없음을 확인하였다. 따라서 천연가스 열량이 $9,800kcal/Nm^3$까지 감소하여도 별도의 조정없이 GHP가 정상운전될 수 있을 것으로 판단된다.

가열식용유(加熱食用油)에 관(關)한 연구(硏究)(II) -미(米)강유(油)의 유동성(流動性)과 지방산변화(脂肪酸變化)에 관(關)해서- (A Study on the Heated Edible Oils(II) -Flow Properties and Changes of Fatty Acid Compositions on the Rice Bran Oil-)

  • 김은애;정태명;김행자;박재옥
    • Journal of Nutrition and Health
    • /
    • 제11권1호
    • /
    • pp.33-37
    • /
    • 1978
  • The effect of heating time (0 to 30 hours at $180{\pm}5^{\circ}C$) on the change of flow properties, fatty acid compositions and some other characteristics such as acid value, iodine value, peroxide value and density of purified edible rice bran oil were observed. flow properties were measured with Maron-Belner type capillary viscometer. Newtonian motion was observed in non-heated oil and the oil heated for 5 hours but non-Newtonian motion was observed in the oil heated for more than 10 hours and at high shear stress. The fatty acid compositions were analyzed by gas liquid chromatography and all the components of fatty acids were reduced in amounts with extention of heating time. The acid value, peroxide value and density were increased but iodine value were decreased with extension of heating time.

  • PDF

고온 카본발열체의 발열특성에 관한 연구 (Study on the Heat Generation Characteristics of the Carbon Heating Source with High Temperature)

  • 배강열;이광성;신재호;정효민;정한식;전지수
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.106-111
    • /
    • 2001
  • This paper is a study on the heat generation characteristics of the carbon heating source with high temperature. The main variables of this study are the input current and the amount of carbon heating source. As the results of the experiment in the waste rate of carbon heating source. The case of carbon heating source 300g was large than 500g. As the input current and the temperature are increased, the resistance values of carbon heating source were large. The Joule heat was represented the large value as the amount of heating source decrease with the input current. Finally, the heating source was represented the electrical steady state as the input current is increase.

  • PDF

산채혼합음료에 대한 감마선 조사의 선도유지효과 (Effect of Irradiation on the Quality of Mixed Mountain Edible Herb Drinks)

  • 오덕환;함승시;이상영;박부길;정차권;강일준;공영준
    • 한국식품저장유통학회지
    • /
    • 제6권1호
    • /
    • pp.48-54
    • /
    • 1999
  • The effect of irradiation of heat treatment either alone or in combination on the shelf-life of mixed mountain edible herb drinks (MMEHD) was investigated during storage. The MMEHD made from fresh Spuriopinella bracycarpar, Ligularia fischeri and Aster scaber was gamma -irradiated at doses of 0.1 kGy to 1 kGy. Microbial population, color change, vitamin C content, and sensory quality were evaluated during storage at 4, 25 and 35oC. Heated MMEHD induced the growth of total counts, mold and yeast as compared to the non-heated MMEHD. While some reduction in the microbial growth was observed in 1kGy-irradiated groups of both with or without heating. In both groups, L and b values decreased, but a value increased during storage. Also, heating drinks showed increased L and b values and reduced a value, compared to the non-heating drinks. Non-heated drinks showed 82% loss of vitamin C, whereas 25% loss of vitamin C was occurred in the irradiated drinks during storage at 4oC for 4days. In the meanwhile, non-irradiated heating drinks showed 99% loss of vitamin C, but irradiated heating drinks showed 58-65% reduction of vitamin C. Non-irradiated drinks without heating showed more bright color than irradiated ones, but irradiated drinks showed more enhanced brightness during storage. Also, irradiated drinks showed better falvor, sensory quality, and overall acceptability than non-irradiated drinks.

  • PDF

고점도 폐유의 재활용에 의한 난방연료 제조 (Preparation of Heating Fuel by the Recycling of High Viscosity Waste Oil)

  • 진의;정영진
    • 공업화학
    • /
    • 제20권4호
    • /
    • pp.411-415
    • /
    • 2009
  • 고점도인 최저급 폐유를 난방유로 대체하기 위하여 폐유에 희석용제로 경유,벙커C유를 이용하여 일정비율로 혼합한 후 연료 특성을 분석하였다. 혼합조건은 교반속도 3400~3600 rpm에서, 반응 시간을 30 s~30 min으로 조절하였고 반응온도는 $75{\pm}5^{\circ}C$로 유지하였다. 벙커C유, 경유를 이용하여 폐유의 점도를 낮춘 결과 최소 81%, 최대 96% 정도 감소되었다. 난방연료로서 폐유 : 벙커C유 : 경유의 최적 혼합 비율은 1 : 1 : 1이었으며 이 경우 인화점 $78^{\circ}C$, 동점도 $20.02mm^{2}/s$, 발열량 9158 kcal/L을 가짐을 확인하였다.