• 동의생리병리학회지
• /
• 제21권5호
• /
• pp.1250-1259
• /
• 2007

Bambusae Caulis in Liquamen(BCL) has been commonly prescribed for stroke patients in the traditional Oriental medicine. So this study is aims to investigate the anti-apoptotic and neuroprotective effects of Bambusae Caulis in Liquamen(BCL) manufactured by different production process on the focal ischemia induced by intraluminal filament insertion in rats. The focal ischemia was induced by intraluminal filament insertion into middle cerebral artery. The animals were divided into four groups (n=15 in each group). The ischemia induced and not treated group : Control group, the ischemia induced and oral medication of the three kinds of BCL : BCL-A group, BCL-B group, BCL-C group. BCL-A was produced by heating at a low temperature$(250^{\circ} C)$ in electric kiln and filtering. BCL-B was produced by heating at a high temperature$(900^{\circ} C{\sim}1,000^{\circ}C)$ in yellow earth kiln and refining and filtering. BCL-C was produced by heating at a low temperature$(400^{\circ} C)$ yellow earth kiln and no refining and filtering. The anti-apoptotic and neuroprotective effects of the oral medication of BCL were observed by Bax, BCL-2, cytochrome c, mGluR5, cresyl violet and ChAT-stain. Our study suggests that BCl-A(was produced by heating at a low temperature in electric kiln and filtering) and BCL-C(was produced by heating at a low temperature in yellow earth kiln and no refining and filtering) show anti-apoptotic and neuroprotective effects on the focal ischemia induced by intraluminal filament insertion in rats and BCL-C is more effective than BCL-A.

• Journal of Ginseng Research
• /
• 제32권2호
• /
• pp.120-126
• /
• 2008

This study was carried out to investigate the some physicochemical properties of Korean red ginseng (Panax ginseng C.A. Meyer) water extract (RGWE) after heated with high temperatures above $100^{\circ}C$ for 2 hours. RGWEs were heated at 100, 110 and $120^{\circ}C$ for 2 hours by using autoclave. After RGWEs were heated at high temperature for 2 hours without not adjustment of pH, the changes of saponin, free sugars, mineral and color in the RGWEs were investigated. Total ginsenoside content in control was 1.99%, while those of RGWE were 1.65, 1.49 and 1.29% when treated at 100, 110 and $120^{\circ}C$, respectively. The contents of total ginsenoside showed decreased tendency as heating temperatures were increased. The ginsenoside-$Rh_{2}$ and $-Rg_{3}$, which have been reported as very stable red ginseng ginsenosides, showed relatively strong spots on TLC when RGWEs were heated at 110 and $120^{\circ}C$. In case of free sugars in RGWEs, fructose, glucose and maltose showed high contents when compared with control, while Fe, Ca and Mg ions showed very low contents. Value of L in RGWE treated with high temperature was almost the same with control, while values of a and b were increased. Values of a were increased from -0.86 of control to +0.04, +0.05 and +1.14 when treated with 100, 110 and $120^{\circ}C$, respectively. Values of b also were increased from 27.68 of control to 33.61, 33.61 and 37.42 when treated with 100, 110 and $120^{\circ}C$, respectively. Values of total color in RGWEs treated with high temperatures, E, were finally increased by values of a and b.

• 한국태양에너지학회 논문집
• /
• 제33권6호
• /
• pp.77-84
• /
• 2013

Degree-day method is very simple but essential index to estimate heating and cooling energy demand in buildings. It has been neglected, however, for the simplicity so it is difficult to find any DB for south Korean cities. Even meteorological department of S. Korea doesn't report the data officially. In this study, current methods that are being used in many countries are investigated and used to calculate degree-days of 35 south Korean cities with 30 years(1981~2010) historical data. The calculation result indicates that the error among 4 major methods are dependent on how daily or hourly temperature are treated in the calculation and how balance point temperature is defined. The errors of the methods are no larger than 6% relative to hourly degree-day method.

• Journal of the Korean Wood Science and Technology
• /
• 제43권3호
• /
• pp.390-399
• /
• 2015

본 연구는 커피부산물(이하 CW)의 재자원화 방안으로 여러 조건에서 열처리한 CW를 폼알데하이드(이하 HCHO)와 함께 데시케이터에 방치한 후, CW에 흡착된 HCHO 양을 아세틸아세톤법과 dinitrophenylhydrazine (이하 DNPH)법으로 측정 및 비교하여 섬유판 제조에 있어 흡착제로서 CW의 적용 가능성을 탐색하기 위하여 수행하였다. 데시케이터 내의 증류수에 흡착된 HCHO 양을 아세틸아세톤법으로 측정한 결과 열처리하지 않은 CW에서 가장 낮았고 $100^{\circ}C$의 열처리 온도까지 계속 증가하였으나, $100^{\circ}C$ 이상의 온도에서는 차이가 없었다. CW에 직접 흡착된 HCHO양은 $100^{\circ}C$에서 열처리한 CW에서 가장 높았으며, $50^{\circ}C$, $150^{\circ}C$, $0^{\circ}C$, $250^{\circ}C$ 그리고 $200^{\circ}C$ 순으로 측정되었다. DNPH법으로 측정한 CW의 HCHO 흡착능 결과는 데시케이터 내에 HCHO와 함께 방치시킨 무열처리 CW의 증류수에 교반시킨 용액에서는 HCHO가 검출되지 않은 반면, 열처리 CW 교반액에서는 일정량의 HCHO가 검출되었다. 그 검출량은 $100^{\circ}C$에서 10분간 열처리시킨 CW에서 가장 높았다. 또한 HCHO가 흡착된 CW 자체의 HCHO 양은 열처리 시간과 상관없이 $100^{\circ}C$의 열처리 온도까지 계속 증가하였으나, 그 이상의 열처리 온도에서는 HCHO 검출량의 증가폭이 줄거나 검출량이 감소하는 것으로 나타났다. 결과를 종합하면, 최대 HCHO 흡착을 위한 CW의 열처리 조건으로 기술적 그리고 경제적 측면을 고려하여 $100{\sim}150^{\circ}C$의 온도 범위에서 10분으로 판단되며, 이 열처리 CW를 섬유판 제조에 있어 흡착제로 일정량 첨가한다면 기존 섬유판의 HCHO 방산량을 낮출 수 있는 하나의 방안이 될 것으로 생각한다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
• /
• pp.83-89
• /
• 2001

Most technologies of reduction process used in the heat treatment of existent metal products are related to metals applied to bolts and parts of automobiles, and nonmetal such as copper. Heating conditions and reduction gases produced in above processes depend on types of products to be treated thermally but heating systems employ electricity commonly and the reduction gases are separated into additional production equipment and a gas dryer and inefficiently provided into the system. Electrical heating system has the advantage of convenient temperature-control but is not economical because of disadvantages of high electricity-running cost and extra installation cost of a transformer. Accordingly, development of the system which has economical heating mode in which provision of reduction gas and heating conditions are unified is necessary for improvement of economy and efficiency in current reduction processes. This study aimed to develop a new advanced heat treatment furnace using catalytic combustion. thereby minimizing the cost during heating, supplying heat and reductive gas at the same time and controlling operating condition freely by changing electrical heating system to heating system by the gas combustion and regeneration of wasted heat.

• 공업화학
• /
• 제28권1호
• /
• pp.80-86
• /
• 2017

본 연구에서는 흑연섬유(GF)의 전기적 특성을 변화시키기 위하여 질소관능기 도입을 실시하였고, 처리조건에 따라 흑연섬유의 발열성능을 평가하였다. 흑연섬유는 $200^{\circ}C$에서 2 h 동안 열-고상반응법으로 처리되었다. 질소도핑 된 흑연섬유의 표면특성은 XPS로 조사되었으며, 저항 및 발열온도는 전위계 시스템과 열화상카메라를 이용하여 측정하였다. XPS 결과 우레아 함량이 증가함에 따라 흑연섬유 표면의 질소관능기가 증가하였으며, 이 질소관능기가 도입됨에 따라서 흑연섬유의 발열특성이 또한 향상되었다. 우레아 처리된 흑연섬유의 최대 발열온도는 60 V에서 $53.8^{\circ}C$로 나타났으며, 이는 미처리 흑연섬유와 비교하여 발열특성이 약 55% 향상됨을 알 수 있었다. 이러한 효과는 열고상반응법에 의해서 흑연섬유 표면에 도입된 질소관능기 때문에 기인한 것으로, 이는 흑연섬유의 열적 특성에 상당히 영향을 주었다.

• 한국표면공학회지
• /
• 제42권1호
• /
• pp.1-7
• /
• 2009

Resistive heating sources are widely used to prepare thin films by vapor deposition because they are cheap, and easy to install and handle in vacuum system. Graphite is one of materials used to make the resistive heating source, but until now only limited applications have been possible as it reacts easily with evaporating materials at high temperature. In this study, evaporation characteristics of aluminum have been investigated by using graphite boat thermally treated with BN powder. The employed graphite boat has been prepared by spray-coating BN power onto the cavity surface of the boat and thermal treatment with aluminum in vacuum at the temperature of more than $1400^{\circ}C$. The voltage-current characteristics as well as resistivity changes of the graphite boat have been investigated during aluminum evaporation according to the applied voltage and time. The evaporation aspect has been picturized during flash evaporation for 40 seconds based on the characterization results. The evaporation rate of the graphite boat has been compared with that of BN boat. The graphite boat showed some different characteristics compared with BN boat, in that the evaporation occurred at the last stage of flash evaporation. The film appearance according to the applied voltage has been compared, and also the reflectance of the resulting film has been investigated according to the film thickness. It has been found that the graphite boat thermally treated with BN powder can be used for aluminum evaporation without problem.

• 한국재료학회지
• /
• 제25권11호
• /
• pp.607-611
• /
• 2015

The microstructural evolution of Grade 91 tempered martensite ferritic steels heat treated at $760{\sim}1000^{\circ}C$ for two hours was investigated using scanning electron microscopy(SEM), energy disperse spectroscopy(EDS), electron backscattered diffraction (EBSD), and transmission electron microscopy(TEM); a microhardness tester was also employed, with a focus on the grain and precipitate evolution process as well as on the main hardening element. It was found that an evolution of tempered martensite to ferrite($760{\sim}850^{\circ}C$), and to fresh martensite($900{\sim}1000^{\circ}C$), occurred with the increase of temperature. Simultaneously, the parabolic evolution characteristics of the low angle grain boundary(LAGB) increased with the increase of the heating temperature(highest fraction of LAGB at $925^{\circ}C$), indicating grain recovery upon intercritical heating. The main precipitate, $M_{23}C_6$, was found to be coarsened slightly at $760{\sim}850^{\circ}C$; it then dissolved at $850{\sim}1000^{\circ}C$. Besides this, $M_3C$ cementite was formed at $900{\sim}1000^{\circ}C$. Finally, the experimental results show that the hardness of the steel depended largely on the matrix structure, rather than on the precipitates, with the fresh martensite showing the highest hardness value.

• 농업생명과학연구
• /
• 제44권1호
• /
• pp.61-67
• /
• 2010

마늘의 주요 저장성분인 fructan을 산 가수분해시키고 열처리에 따른 폴리페놀함량과 항산화활성의 변화를 살펴보았다. 마늘 fructan의 최적 산가수분해 조건은 0.3N $H_2SO_4$으로 5분간 반응시켰을 때로 나타났다. 열처리에 의한 fructan 함량은 열처리 온도가 증가함에 따라 240.5 mg/g에서 2.0 mg/g으로 분해되어 감소하였으며, 총 폴리페놀 함량은 열처리 온도 증가에 따라 0.85 mg/g에서 13.74 mg/g으로 증가하였고, 항산화활성($IC_{50}$)은 열처리온도가 증가에 따라 52.9 mg/mL에서 1.5 mg/mL으로 증가하였다. 열처리 후 산가수분해시 총 폴리페놀 함량 및 항산화활성은 증가하였다. 마늘 fructan을 분해하여 식품소재로서의 활용과 동시에 항산화활성을 강화시키기 위한 열처리 조건으로는 $130^{\circ}C$, 2시간 처리가 적합한 것으로 판단되었다.

• 한국산업융합학회 논문집
• /
• 제5권4호
• /
• pp.361-366
• /
• 2002

The change of mechanical properties of drawn PP filaments which was treated by isothermally annealed after elevated heating. Measurements were carried out with UTM for mechanical properties. Isothermally heat treatment were carried out $100^{\circ}C$, $120^{\circ}C$, $140^{\circ}C$ for 10min., 30min., 60min, in silicon oil bath. And isothermally heat treatment after elevated heating from $20^{\circ}C$ were carried out $100^{\circ}C$, $120^{\circ}C$, $140^{\circ}C$ for 10min., 30min., 60min., with heating rate of $1^{\circ}C/min$., $5^{\circ}C/min$., $10^{\circ}C/min$. From the results of this study, it found the following facts. Initial modulus and tensile strength were increased with increasing of annealed temperature and time. Also initial modulus of tensile strength of samples which were isothermally annealed after elevated heating from $20^{\circ}C$ were higher than those of isothermally annealed samples.