• 자원리싸이클링
• /
• 제17권6호
• /
• pp.50-56
• /
• 2008

Post-consumed플라스틱 중 폐 polypropylene fraction으로 분리된 재료를 이용하여 열분해 실험을 수행하였다. 본 연구의 목적은 열분해 생성오일 중 용제로 사용이 가능한 BTEX-aromatics 수율이 반웅온도에 따라 어떤 영향을 받는지 고찰하는 것이었다. 이를 위하여 열전달이 우수한 유동층 반응기를 이용하여 $650^{\circ}C$에서 $700^{\circ}C$ 사이의 반응온도에서 열분해 실험을 진행하였다. 본 실험에서는 오일생성 극대화를 위해 열분해 반응 중 생성되는 가스를 유동화 가스로 사용하였으며, 유동화 가스의 유량과 시료 투입율은 실험 중에 일정하게 유지하였다. 실험결과 gas, oil 및 char가 반응 생성물로 얻어졌다. 생성 가스는 GCs(TCD, FID)를 사용하여 정량 분석하였고 정성적 분석을 위해서는 GC-MS 시스템을 이용하였다 정확한 분석을 위해서 생성오일은 진공 증류하여 distillation residue를 분리하였으며, 증류한 oil은 GC-MS 통해 정성 및 정량적 분석을 수행하였다. 반응온도가 높아질수록 distillation oil중의 BTEX-aromatics의 함량은 증가하였으며 $695^{\circ}C$에서 약 30% 정도의 함량을 나타내었다. 생성 가스는 대부분 $CH_4$, $C_2H_4$, $C_2H_6$, $C_3H_6$, $C_4H_{10}$로 구성되어 있었으며, 고위 발열량은 약 45 MJ/kg로서 열분해 공정 에너지원이나 기타 연료용 에너지원으로 사용가능할 것으로 평가되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.58.1-58.1
• /
• 2010

In solar cell module manufacturing, single solar cells has to be joined electrically to strings. Copper stripes coated with tin-silver-copper alloy are joined on screen printed silver of solar cells which is called busbar. The bus bar collects the electrons generated in solar cell and it is connected to the next cell in the conventional module manufacturing by a metal stringer using conventional hot air or infrared lamp soldering systems. For thin solar cells, both soldering methods have disadvantages, which heats up the whole cell to high temperatures. Because of the different thermal expansion coefficient, mechanical stresses are induced in the solar cell. Recently, the trend of solar cell is toward thinner thickness below 180um and thus the risk of breakage of solar cells is increasing. This has led to the demand for new joining processes with high productivity and reduced error rates. In our project, we have developed a new method to solder solar cells with a laser heating source. The soldering process using diode laser with wavelength of 980nm was examined. The diode laser used has a maximum power of 60W and a scanner system is used to solder dimension of 6" solar cell and the beam travel speed is optimized. For clamping copper stripe to solar cell, zirconia(ZrO)coated iron pin-spring system is used to clamp both joining parts during a scanner system is traveled. The hot plate temperature that solar cell is positioned during lasersoldering process is optimized. Also, conventional solder joints after $180^{\circ}C$ peel tests are compared to the laser soldering methods. Microstructures in welded zone shows that the diffusion zone between solar cell and metal stripes is better formed than inIR soldering method. It is analyzed that the laser solder joints show no damages to the silicon wafer and no cracks beneath the contact. Peel strength between 4N and 5N are measured, with much shorter joining time than IR solder joints and it is shown that the use of laser soldering reduced the degree of bending of solar cell much less than IR soldering.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권4호
• /
• pp.537-543
• /
• 1999

Whole horse beans (Vicia faba cv. Alfred) (WHB) were pressure toasted at different temperatures of 100, 118 and $136^{\circ}C$ for 3, 7, 15 and 30 minutes in order to determine an optimal heating conditions to increase bypass starch (BPSt) as glucose source which is usually limiting nutrient in highly producing dairy cows in the Netherlands. Starch (St) Ruminal Degradative Kinetics and Fermentation Characteristics of (SRDC) of WHB were determined using in sacco technique in 4 lactating dairy cows fed 47% hay and 53% concentrate according to Dutch dairy cow requirements. Measured characteristics of St were soluble fraction (S), potentially degradable fraction (D) and rate of degradation (Kd) of insoluble but degradable fraction. Based on measured characteristics, percentage bypass starch (BPSt) was calculated according to the Dutch new feed evaluation system: the DVE/OEB system. Pressure toasting temperatures significantly affected starch gelatinization (p<0.01). Degradability of Starch in the rumen was highly reduced by pressure toasting (p<0.01). S varied from 58.2% in the raw WHB (RWHB as a control) to 19.6% in $136^{\circ}C/15min$. S was reduced rapidly with increasing time and temperature (p<0.01). D varied from 41.8% in RWHB to 80.5% in $136^{\circ}C/15min$. D fraction was enormously increased with increasing time and temperature (p<0.01). Kd varied from 4.9%h in RWHB to 3.4%/h in $136^{\circ}C/15min$. All these effects resulted in increasing %BPSt from 29.0% in RWHB to 53.1% in $136^{\circ}C/15min$. Therefore BPSt increased from 93.5 g/kg in RWHB to 173.5 g/kg in $136^{\circ}C/15min$. The effects of pressure toasting on %BPSt and BPSt seemed to be linear up to the highest values tested. Therefore no optimal pressure toasting conditions could be determined at this stage. But among 10 treatments, The treatment of $136^{\circ}C/15min$was the best with the highest BPSt content. It was concluded that pressure toasting was effective in shifting starch degradation from rumen to small intestine to increase bypass starch.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권5호
• /
• pp.503-509
• /
• 1998

Whole faba beans (WFB) were dry roasted at different temperatures of 110, 130 and $150^{\circ}C$ for 15, 30 and 45 minutes (min) to determine the optimal heating conditions to increase bypass starch as glucose source which may be a limiting nutrient in high producing dairy cattle. Ruminant degradation characteristics of starch (St) of WFB were determined using in sacco method in 6 dairy cows fed 60% hay and 40% concentrate. Measured characteristics of St were soluble (washable) fraction (S), potentially degradation fraction (D) and the rate of degradation (Kd) of the insoluble but degradable St fraction. Based on measurement of these characteristics, percentage bypass starch (%BSt) and bypass starch (BSt) were calculated. Degradability of starch in the rumen was reduced by dry roasting at temperature of 130 and $150^{\circ}C$ and increased at $110^{\circ}C$. S varied from 50.0% in the raw whole faba beans (RWFB) and 53.7% in $110^{\circ}C$/15 min to 18.2% in $150^{\circ}C$/45 min. D varied from 49.9% in RWFB and 46.3% in $110^{\circ}C$/15 min to 81.8 % in $150^{\circ}C$/45 min. Kd varied from 9.8% in RWFB and 11.0% in the $110^{\circ}C$/30 min to 4.2 in $150^{\circ}C$/45 min. All these effects resulted in increasing %BSt from 22.1% in the $110^{\circ}C$/45 min and 23.9% in RWFB to 49.9% in the $150^{\circ}C$/45 min. Therefore BSt increased from 91.4 g/kg and 98.4 g/kg to 199.9 g/kg respectively. Dry roasting at $110^{\circ}C$ increased the starch rumen degradation. Treatment at higher temperature (130 and $150^{\circ}C$) decreased rumen degradation of starch and seemed to be linear up to highest values tested. No optimal dry roasting conditions of treatment could be determined at this stage. It may be concluded that dry roasting at temperatures of 130 and $150^{\circ}C$ was effective in shifting starch degradation from rumen to intestine to increase bypass starch.

• 농업과학연구
• /
• 제33권1호
• /
• pp.85-95
• /
• 2006

A model experiment has been performed to get the heat transfer coefficient on the soil surface in the closed ecosystem. The heat flux on the soil surface was measured and the heat transfer coefficient was derived in the following two cases with 5-stepped control of inside air current speed. One case was that heat flowed from air to soil and the other case was that heat flowed from soil to air. Three dimensional CFD model has been set to simulate thermal environment in the closed ecosystem including soil layers. The standard $k-{\varepsilon}$ model of the CFD program was chosen for turbulence model and heating wire buried in the soil layers was set as heat source option to simulate the case when the temperature of soil surface was higher than that of inside air in the closed ecosystem. Between one case that heat flowed from air to soil and the other case that heat flowed from soil to air, there were big differences in the temperature distribution of soil layers and the heat transfer coefficient of the soil surface. The increasing rate of heat transfer coefficient on each case according to the increase of inside air current speed was similar to each other and it respectively increased linearly. But the heat transfer coefficient on the case that heat flowed from soil to air was much bigger than that of the other case. The model was validated by comparing simulated values of CFD model with measured values of the model experiment. Simulated and measured temperature of inside air and soil layers, and heat transfer coefficient of the soil surface were well accorded and the range of corrected $R^2$ was 0.664 to 0.875. The developed CFD model was well simulated in parts of the temperature of inside air and soil layers, the distribution of the inside air current speed, and heat transfer coefficient of the soil surface were able to be quantitatively analyzed by using this model. Therefore, the model would be applied and used for analysis of heat transfer coefficient between air and surface in various agricultural facilities.

• 비파괴검사학회지
• /
• 제27권5호
• /
• pp.426-431
• /
• 2007

고에너지 초음파 여기 탄성파가 물체의 균열, 박리 등의 결함 부위를 통과할 때 서로 맞닿은 결함면은 균일하게 진동하지 않는다. 초음파 입사에 따른 결함 면 사이의 마찰(friction), 문지름 (rubbing) 또는 부딪침(clapping) 에 의해 진동 에너지가 결함 부위에서 국부적인 열로 변환된다. 이를 적외선 열 영상 카메라로 관측하면 구조물의 결함을 실시간으로 검출할 수 있다. 본 논문에서는 초음파 열 영상 검사를 이용한 인코넬 합금 박판의 브레이징 접합 결함 검출에 대해 기술한다. 2 kW 의 전력과 23 kHz 대역의 가진 주파수를 갖는 초음파 펄스를 280 ms 기간 동안 인코넬 합금의 브레이징 접합 박판에 입사시켰다. 브레이징 접합부의 결함위치 부근의 인코넬 합금 박판의 양면이 맞닿은 경계선에서 아주 밝은 국부적인 발열(핫 스팟)이 적외선 열 영상 카메라에 의해 관측되었으며 브레이징 접합 결함 위치에서도 미약한 열이 관측되었다. 배경 감산 평균 및 히스토그램 평활화 처리 등의 영상처리를 통해 브레이징 접합의 결함을 확인하였다.

• 한국미생물·생명공학회지
• /
• 제44권3호
• /
• pp.400-407
• /
• 2016

인삼 유묘 뿌리 주변에서 자라고 있는 단세포 녹색 조류, 클로렐라 불가리스 KNUA027을 순수분리한 후 본 분리균주의 생물공학적 활용 가능성에대해조사를 실시하였다. 가스크로마토그래프/질량분석기를 이용한 분석 결과, 본 균주에는 영양학적으로 중요한 알파 리놀렌산(C_18:3 ω3, 45.8%, 50.8 mg/g) 및 헥사데카트리엔산(C_16:3 ω3, 11.8%, 13.1 mg/g)과 같은 다가불포화지방산이 풍부한 것으로 밝혀졌다. 따라서, 본 국내 토착 미세조류는 잠재적인 오메가-3 다가불포화지방산 원료가 될 수 있다고 사료된다. 또한, 바이오디젤 생산에 적합한 것으로 알려져 있는 팔미트산(C_16:0, 37.1%, 41.2 mg/g) 역시 본 균주에 의해 주요 지방산 성분으로 생합성 되는 것으로 확인되었다. 근사분석 결과 KNUA027 균주의 휘발성물질 함량은 88.5%였으며, 원소분석 결과 고위발열량은 19.8 MJ/kg으로 나타났다. 본 KNUA027 균주를 이용한 연구결과는 미세조류 기반 바이오연료와 바이오매스 생산을 위한 기초자료 역할을 할 수 있을 것으로 기대된다.

• 한국미생물·생명공학회지
• /
• 제29권4호
• /
• pp.227-233
• /
• 2001

고부가가치의 천연 astaxanthin의 생산을 위한 Haematococcus pluvialis의 고농도 배양을 수립하기 위하여 세포 농도를 증가시키는 방법과 세포 내 색소를 증가시키는 방법 두 가지에 초점을 맞춰 본 연구를 수행하였다 Hongkong Medium (HKM) Modifed Bolds Basal Medium (MBBM) Modified Bristols Medium(MBM) Proteose-petone Medium (PPM) BG-11 Medium의 여러 배지를 사용하여 비교함으로서 배지 내 탄소원 질소원과 미량원소 등이 세포의 생장과 astaxan-tin 생산에 미치는 영향을 보면 HKM 은 $2.0$\times$10^{6}$ cells /mL의 세포 농도와 최고 6.14 mg/g cell의 astaxanthin content per cell 로 다른 배지 중 가장 높게 나타나므로 세포 농도를 높이기위해서 질소우너이 220 mg/L 인 HKM이 적당하고 색소 형성을 촉진시키기 위해서는 aggregation이 일어나 단위 세포당 astaxanthin 함량이 9.7 mg/g cell 로 높게 나타나는 MBBM이 월등함을 알수 있었다. H. pluvialis의 최적 배양 온도와 pH를 선정하깅 nl하여 $20^{\circ}C$ $25^{\circ}C$, 3$0^{\circ}C$ 온도와 pH 4.5 6.0 7.5 의 배양조건을 수립한 결가 pH $7.5 20^{\circ}C$와 $25^{\circ}C$에서는 세포생장과 색소 형성이 우수함을 관찰 할 수 있었고 배양에 적당한 20 $^{\circ}C$ 에서 배양하다가 $30^{\circ}C$로 24시간 배양항 heating 효과를 주면 astaxanthin 축적을 촉진시키는데 효과적임을 알수있었다. PPMso의 질소원과 proteose-peptone의 고갈시세포의 생장의특성과 astaxanthin 생산에 미치는 영향은 control 배지에서 세포 농도와 세포의 건조질량이 각각 $0.98$\times$10^{6}$ / cell /mL 와 0.2 g/L astaxanthin의 농도는 1.92 mg/L 단위 세포당 astaxanthin 농도는 9.6 mg/g cell 로 관찰되었다결론적으로 질소원과 peptone이 고갈되면 세포의 생장은 억제되나 astaxanthin의 생산은 촉진됨을 알수 있었으며 세포 생장을 촉진하는 광도 60$\mu$E/($\m^2$s)와 HKM 배지 이용의 1단계와 높은 광도와 MBBM배지를 이용한 색소 생산의 2단계 배양을 최적조건으로 수립하였다.

• Journal of Animal Science and Technology
• /
• 제59권10호
• /
• pp.23.1-23.11
• /
• 2017

Background: Although soybean meal (SBM) is excellent source of protein in diets for poultry, it is sometimes inaccessible, costly and fluctuates in supply. The SBM can partially be replaced by full-fat SBM, but the meals prepared from raw full-fat soybean contain antinutritional factors. To avoid the risk of antinutritional factors, heat treatment is always advisable, but either excessive or under heating the soybean could negatively affect the quality. However, the potential for further improvement of SBM by supplementing with microbial enzymes has been suggested by many researchers. The objective of this study was to evaluate the performance and ileal nutrient digestibility of birds fed on diets containing raw soybeans and supplemented with microbial protease. Methods: A $3{\times}2$ factorial, involving 3 levels of raw full-fat soybean (RFFS; 0, 45 or 75 g/kg of diet) and 2 levels of protease (0 or 15,000 PROT/kg) was used. The birds were raised in a climate-controlled room. A nitrogen-free diet was also offered to a reference group from day 19 to 24 to determine protein and amino acid flow at the terminal ileum and calculate the standardized ileal digestibility of nutrients. On days 10, 24 and 35, body weight and feed leftover were recorded to calculate the body weight gain (BWG), feed intake (FI) and feed conversion ratio (FCR). On day 24, samples of ileal digesta were collected at least from two birds per replicate. Results: When RFFS was increased from 0 to 75 g/kg of diet, the content of trypsin inhibitors was increased from 1747 to 10,193 trypsin inhibitors unit (TIU)/g of diets, and feed consumption of birds was also reduced (P < 0.05). Increasing RFFS level reduced the BWG from hatch 0 to 10 d (P < 0.01) and hatch to 24 d (P < 0.05). The BWG of birds from hatch to 35 was not significantly (P = 0.07) affected. Feed intake was also reduced (P < 0.05) during 0 to 35 d. However, protease supplementation improved (P < 0.05) the BWG and FCR during 0 to 24 d. Rising levels of RFFS increased the weight of pancreas (P < 0.001) and small intestine (P < 0.001) at day 24. Except for methionine, apparent and the corresponding standardized ileal digestibility of CP and AA were reduced (P < 0.01) by increasing levels of RFFS in diets. Conclusion: This study showed that some commercial SBM could be replaced by RFFS in broiler diets, without markedly compromising productivity. The AID and SID of CP and lysine were slightly improved by dietary supplementation of microbial protease.

• 한국세라믹학회지
• /
• 제40권8호
• /
• pp.804-810
• /
• 2003

건설폐기물 중 폐콘크리트를 40$0^{\circ}C$로 가열한 후 ball mill로 분쇄하여 재생골재를 생산할 때 발생된 미분말을 보통 포틀랜드 시멘트의 SiO$_2$, CaO, A1$_2$O$_3$원에 대한 대체원료물질로서 활용하고자 하였다. 클링커를 제조하기 위한 주원료는 석회석, shale, 전로슬래그, fly ash를 이용하였고, modulus는 LSF:91.0, SM:2.60, IM:1.60로 고정한 후 shale에 대해 미분말을 25, 50, 15, 100%까지 치환하여 클링커를 제조하였다. 클링커의 주요생성광물은 1,45$0^{\circ}C$에서 OPC와 같은 광물상인 $C_3$S, $\beta$-C$_2$S, $C_3$A, $C_4$AF 상으로 나타났다. 조합원료의 반응성을 비교하기 위해 시차열분석을 실시하고, 소성성지수를 구한 결과, 클링커의 광물상 생성온도는 plain과 유사했으며, 소성성지수는 48.6-51.4 정도로 나타났다.