• 제목/요약/키워드: Heating hydrolysis

검색결과 90건 처리시간 0.027초

밤 전분 및 전분겔의 성질에 관한 연구 (Properties of Chestnut Starch and It's Gel)

  • 주난영;안승요
    • 한국식품과학회지
    • /
    • 제27권6호
    • /
    • pp.1017-1027
    • /
    • 1995
  • 밤 전분의 이화학적 성질, 분자구조적 성질, 산처리 전분의 성질, 전분겔의 특성에 대하여 시험하였다. 아밀로오스 함량은 18.9%였고 X-선 회절도는 $C_b$형을 나타내었다. 팽윤력은 $65^{\circ}C{\sim}75^{\circ}C$까지 급격히 증가하고 그보다 높은 온도에서는 완만히 증가하였고, 용해도는 $70^{\circ}C$까지는 직선적으로 증가하나 그보다 높은 온도에서 는 완만히 증가하였다. 가열온도를 $75^{\circ}C,\;85^{\circ}C,\;95^{\circ}C$로 달리한 아밀로그래프에서 $50^{\circ}C$에서의 냉각점도는 가열온도가 증가함에 따라 낮아졌다. 밤 전분 아밀로오스의 최대흡수파장은 640nm, ${\beta}$-아밀라아제 분해한도는 84.2%, 중합도는 951이었고 아밀로펙틴의 최대흡수파장은 570nm, ${\beta}$-아밀라아제 분해한도는 58.2%, 중합도는 1371, 평균사슬길이는 22.6이었다. 전분 및 아밀로오스의 겔 크로마토그래피 용출결과 저분자량($<5{\times}10^5$)의 분자들이 각각 4.0%, 11.5%로 용출되었다. $75^{\circ}C,\;85^{\circ}C,\;95^{\circ}C$ 등 세 온도에서 용출한 가용성 전분의 겔 크로마토그래피 용출양상에서 높은 온도에서 용출한 것일수록 큰 분자량의 전분이 많이 용출되었다. 아밀로펙틴을 pullulanase로 분해시켰을 때 얻어진 가지부분들의 분자량분포에서 피크II(DP 35-45)에 대한 피크III(DP 10-15)의 비율은 2.2였다. 2.2 N HCI로 $35^{\circ}C$에서 10일간 산처리한 밤 전분의 가수분해율은 96%에 이르렀고 가수분해는 4일째를 경계로 두 단계의 다른 가수분해 속도를 나타내었다. 산처리 전분의 겔 크로마토그래피 용출양상에서 초기 6시산 후에 아밀로펙틴 피크가 완전히 사라졌고 산처리 기일이 증가함에 따라 DP 10-15의 짧은 사슬로 분해되었다. 아밀로오스 함량은 산처리 6시간 후까지는 증가하다 그 이후는 감소하였다. 밤 전분겔의 견고성은 $75^{\circ}C$로 가열하여 만든 전분겔에서 가장 높았고 응집성은 $85^{\circ}C$로 가열하여 만든 전분겔에서 가장 높았다. 전분겔의 노화속도는 비교적 빨랐으며 특히 $75^{\circ}C$로 가열하여 만든 전분겔에서 가장 빨랐다.

  • PDF

부분 가수분해된 AlN 분말로부터 산질화 알루미늄(AlON)의 합성 및 소결 (Synthesis of AlON from Partially Hydrolyzed AlN Powder and its Sintering)

  • 김두영;최상욱;남건태
    • 한국세라믹학회지
    • /
    • 제31권11호
    • /
    • pp.1362-1368
    • /
    • 1994
  • The hydrolysis of aluminum nitride was increased gradually with increasing reaction time from 1 hrs to 24 hrs and/or with decreasing the addition of the reaction water from 100 mι 100mι. Amorphous aluminum hydrate, formed in the beginning of the reaction, was transformed to bayerite and to pseudoboehmite at below and above 8$0^{\circ}C$, respectively. Aluminum oxynitride was synthesized by heating the partially hydrolyzed aluminum nitride at 1$700^{\circ}C$ for 4 hrs or at 175$0^{\circ}C$ for 30 min. AlON specimen with 1 wt% of Y2O3 that was molded and then sintered pressurelessly at 190$0^{\circ}C$, exhibits 98% of the theoretical density and a translucency of 68% in the visible ray zone.

  • PDF

인삼청량음료 제조에 관한 연구 (제2보) pH 및 처리조건이 Panaxadiol Saponin의 안정성에 미치는 영향 (Studies on the Manufacturing of Ginseng Soft Drink II. Effect of pH and heat treatment on the stability of panaxadiol saponins)

  • 양재원;도재호
    • Journal of Ginseng Research
    • /
    • 제6권1호
    • /
    • pp.25-29
    • /
    • 1982
  • This investigation was carried out to study the influence of pH and heat treatment on the ginsenosides in the white ginseng extract. Changes in ginsenosides (Rb1, Rb2, ,Rc, Rd) and free sugar were measured by the peak area variation of HPLC chromatogram during 25 hours heat treatment at the various level of pH. It was found that :(1) The peak areas of Rb1. Rb2, Rc and Rd on the HPLC chromatogram were decreased remarkably below pH 4.0 and more decrease was found as the temperature and heating time increased. (2) Those of glucose and arabinose were increased remarkably. It is considrered that the increase of glucose and the formation of arabinose result from the hydrolysis of ginsenoside( Rb1, Rb2, Rc, Rd) linked with sugars.

  • PDF

졸-겔공정에 의해 Polymethylmethacrylate위에 실리카 코팅 (Silica Coating on Polymethylmethacrylate by Sol-Gel Process)

  • 이상근;양천회
    • 한국안전학회지
    • /
    • 제12권4호
    • /
    • pp.79-85
    • /
    • 1997
  • In order to improve the surface characteristics of polymethylmethacrylate(PMMA), oxide thin film coatings were applied using the sol-gel dip-coating technique. The $Si(OC_2H_5)_4$, tetra-ethyl-ortho-silicate(TEOS) was used as a starting material for $SiO_2$ coating. The hardness of the alkoxy-derived oxide-coated PMMA was increased from 190 MPa for non-coated PMMA with increasing film thickness. By optimizing the heating conditions and the hydrolysis conditions, a maximum apparent hardness obtained In the present study was achieved 310 MPa using the withdrawal velocity of 5cm/min and heat treatment at $90^{\circ}C$ for 5 hours, which is about 1.6 times larger than that of uncoated PMMA.

  • PDF

초임계 유체를 이용한 나노크기 $TiO_2$ 분말제조 및 소결특성 (Preparation and Sinterability of Nano-Size $TiO_2$ Powders Using Supercritical Fluids)

  • 송정환;이정석;박인석;임대영
    • 한국세라믹학회지
    • /
    • 제37권7호
    • /
    • pp.625-631
    • /
    • 2000
  • In this study, the characteristics and sinterablities of TiO2 powders which were fabricated on sol-gel process and supercritical fluid process were examined. The powders fabricated on sol-gel process were amorphous. The particle size and shape were changed with the amount of water used for hydrolysis of titanium ethoxide. The powders were changed from amorphous to crystalline by heating at 400℃. The crystalline anatase TiO2 powders were directly prepared in ethanol supercritical fluid condition that temperature was 270±3℃ and pressure was 7.3 MPa. It's primary crystalline size was 20 nm and agglomerated as spherical shape whose size was 0.7∼1㎛. The powders prepared on sol-gel process were not sintered densely at 900℃ because of abnormal grain growth. However, the powders which prepared on supercritical fluid process were sintered densely at the comparatively low temperature of 800℃ by ideal growth of grain, which are fired at 900℃.

  • PDF

인삼의 열처리 과정 중 생성되는 3종의 수산화진세노사이드에 대한 연구 (Three Hydroxylated Ginsenosides from Heat Treatmented Ginseng)

  • 이상명
    • 생약학회지
    • /
    • 제51권4호
    • /
    • pp.255-263
    • /
    • 2020
  • Ginsenosides are considered to be the most important ingredients in ginseng. They are chemically converted by endogenous organic acids contained in ginseng and the heat applied during red ginseng processing. During this procedure, various converted ginsenosides are produced through hydrolysis of substitute sugars of ginsenosides and forming double bonds through dehydration in the dammarane skeleton. In order to study the conversion mechanism of protopanaxadiol-type ginsenosides during the heat treatment process of ginseng, we purified the three final converted ginsenosides by heating fresh ginseng for a long time. The three isolated ginsenosides were identified as 25(OH)-ginsenoside Rg5, 25(OH)-ginsenoside Rz1 and 25(OH)-ginsenoside Rg3 through NMR spectrum analysis. As a result of quantification of ginseng heated at 100 ℃ for 0 to 6 days by HPLC/UV and TLC methods, the content of 25(OH)-ginsenosides tended to increase in proportion to the time exposed to heat. In particular, the content of 25(OH)-ginsenosid Rg5 was confirmed to be noticeably increased.

Protopectinase를 이용한 포도 단세포화물의 품질 특성 (Quality Characteristics of Grape Suspensions Using Protopectinase)

  • 김동호
    • 한국조리학회지
    • /
    • 제18권2호
    • /
    • pp.162-171
    • /
    • 2012
  • 가공식품의 개발에 있어서 식품의 맛과 더불어 저장성, 열안정성 및 색도유지는 소비자의 기호도에 중요한 영향을 미친다. Protopectinase는 식물조직 중엽부의 성분인 불용성 proto-pectin을 분해하여 단세포화하는 효소이다. Protopectinase를 포도에 적용시켜 포도 고유의 세포속에 함유되어 있는 세포내 성분들을 파손없이 단세포로 유리하였다. pH, 총산 함량, 총 폴리페놀함량 및 항산화력은 기계 처리구보다 효소 처리구에서 보다 안정성을 나타내었으며 이는 단세포 처리에 의하여 이들 성분이 안정하게 유지됨을 알 수 있었다. Protopectinase로 처리된 포도 단세포화물을 $4^{\circ}C$에서 28일간 저장하며 색도를 관찰한 결과, 단세포 처리구에서는 기계 처리구보다 색도의 차이가 미비하였으며 기계 처리구에서는 단세포 처리구보다 색의 변화가 크게 나타났다. 또한 포도 단세포화물을 $80^{\circ}C$에서 30분간 열처리한 후 관찰한 결과, 기계 처리구의 경우가 단세포 처리구의 경우보다 품질의 변화를 크게 나타내어 이러한 결과는 효소적 단세포화물의 열 안정성을 의미한다. 따라서 Protopectinase를 이용한 포도의 단세포화는 과실음료제조 및 원료보존에 유용하게 응용가능하며, 나아가 포도 단세포화물의 폭넓은 식품 소재화 가능성과 고부가가치 기능성 식품제조에 이용 될 수 있음을 의미한다.

  • PDF

나노 실리카와 카본블랙이용 탄화열 반응으로 나노 SiC 합성 및 특성 (Synthesis of SiC Nanoparticles by a Sol-Gel Process)

  • 정광진;배동식
    • 한국재료학회지
    • /
    • 제23권4호
    • /
    • pp.246-249
    • /
    • 2013
  • Nano-sized ${\beta}$-SiC nanoparticles were synthesized combined with a sol-gel process and a carbothermal process. TEOS and carbon black were used as starting materials for the silicon source and carbon source, respectively. $SiO_2$ nanoparticles were synthesized using a sol-gel technique (Stober process) combined with hydrolysis and condensation. The size of the particles could be controlled by manipulating the relative rates of the hydrolysis and condensation reactions of tetraethyl orthosilicate (TEOS) within the micro-emulsion. The average particle size and morphology of synthesized silicon dioxide was about 100nm and spherical, respectively. The average particles size and morphology of the used carbon black powders was about 20nm and spherical, respectively. The molar ratio of silicon dioxide and carbon black was fixed to 1:3 in the preparation of each combination. $SiO_2$ and carbon black powders were mixed in ethanol and ball-milled for 12 h. After mixing, the slurries were dried at $80^{\circ}C$ in an oven. The dried powder mixtures were placed in alumina crucibles and synthesized in a tube furnace at $1400{\sim}1500^{\circ}C$ for 4 h with a heating rate of $10^{\circ}C$/min under flowing Ar gas (160 cc/min) and furnace cooling down to room temperature. SiC nanoparticles were characterized by XRD, TEM, and SAED. The XRD results showed that high purity beta silicon carbide with excellent crystallinity was synthesized. TEM revealed that the powders are spherical shape nanoparticles with diameters ranging from 15 to 30 nm with a narrow distribution.

Xylanase를 분비하는 효모 균주의 분리 및 성질 (Isolation and Identification of Xylanase Secreting Yeast)

  • 배명애;서정훈
    • 한국미생물·생명공학회지
    • /
    • 제16권6호
    • /
    • pp.499-504
    • /
    • 1988
  • Xylan를 기질로 직접 alcohol 발효를 목적으로 각종 토양을 균원시료로 하여 xyla를 분해, 자화하는 효모를 분리하여 동정하고 몇 가지 중요한 성질을 조사하였다. Xylanase를 생산하는 XB-33 효모는 Cryptococcus ater 유연균으로 동정되었다. XB-33 균주의 xylanase 생성은 xylan에 의해 induction되고 xylose나 glucose에 의해서는 repression되었다. 또한 xylan 농도는 1% 수준에서 가장 높았으며, 배양일수 6일째 그 황성이 최고치를 나타내었다. XB-33 균주가 생성 분비하는 xylanase를 DEAE-Sephadex A50으로 colum chromatography 하여 부분 정제한 후 이의 생화학적 특성을 검토한 결과 xylanase의 최적작용 pH는 5.0, 최적 온도는 5$0^{\circ}C$였으며 pH 5.0~7.0에서와 온도 6$0^{\circ}C$ 이하에서 의 효소활성은 비교적 안정하였고 xylan에 대한 xylanase의 작용양상을 조사하기 위해 TLC한 결과 최종산물로서 xylose가 확인되었다. 그리고 xylanase의 xylan에 대한 Km치는 20(mg/ml)이었다.

  • PDF

아밀로오스 함량이 산처리 옥수수전분의 특성 및 저항전분수율에 미치는 영향 (Effects of Amylose Content on Properties of Lintnerized Maize Starches and Yield of Resistant Starch)

  • 이신경;신말식
    • Applied Biological Chemistry
    • /
    • 제40권5호
    • /
    • pp.395-399
    • /
    • 1997
  • 아밀로오스 함량이 다른 옥수수전분을 2.2N HCl로 산처리하여 산가수분해 특성 및 효소저항전분의 수율을 비교하였다. 산 가수분해경향은 아밀로오스 함량이 0%인 Amioca는 7일을 경계로, 그외의 전분은 4일을 경계로 2단계로 진행되었으며, 산가수분해 속도상수는 초기에 $4.01{\sim}9.21{\times}10^{-3}hr^{-1}$, 후기에는 $1.60{\sim}5.01{\times}10^{-3}hr^{-1}$로 아밀로오스 함량이 낮을수록 옥수수전분의 가수분해 속도가 빨랐다. 생전분의 X-선 회절양상은 아밀로오스 함량이 적은 Amioca, PFP, CMS(commercial maize starch)는 A형 , 고아밀로오스 함량인 Amaizo 5, Amylomaize VII은 B형의 전형적인 결정형을 보였으며, 산처리 후에도 모든 시료의 결정형은 그대로 유지하였으나 상대적인 결정화도는 증가하였다. 효소저항전분의 수율은 Amioca, CMS, Amylomaize VII이 각각 1.8%, 20.8%, 37.9%로 아밀로오스 함량이 높을수록 수율도 증가하였으며, 가열-냉각 횟수를 4회 반복한 후 분리한 산처리 한 옥수수전분의 효소저항전분의 수율은 1일 산처리한 CMS, Amylomaize VII이 각각 4.5%, 29.1%였으며 7일 산처리시에는 1.5%와 19.4%로 산처리에 의해 효소저항전분의 수율이 감소하였다.

  • PDF