• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.4
• /
• pp.41-48
• /
• 2017

It is necessary to develop an LED traffic light lens having a snow removal function capable of clearly providing a traffic signal to the driver even when a traffic light is blurred due to heavy snow and wind in the winter season. This study is focused on the research and development of the traffic light lens in the process of developing the LED traffic light with the snow removal function. In the developed traffic light lens, instead of attaching the film heater, the coated nichrome wire was wound into a coil shape and inserted directly into the groove in the lens. The developed heater system facilitates the insertion of the heating wire with high elasticity into a curved lens and can provide a sufficient heat without deformation of the PC lens. The proposed traffic lights were tested in various external environments and the test results showed that complete snow removal is possible without tunnel effect.

• Journal of Powder Materials
• /
• v.4 no.4
• /
• pp.291-297
• /
• 1997

Titanium cabide, TiC-x mole% Al composites, and functionally-graded materials (FGMs) of TiC-x mole% Al were synthesized by an electrothermal combustion (ETC) method. TiC-70 mole% Al composite was not ignited by indirect tungsten coil heating, but can be synthesized by an electrothermal combustion. The velocity of the combustion wave decreased with increasing addition of Al and increased with an increase in the applied electric field. Functionally-graded TiC-Al materials were made from reactant layers with compositions of Ti+C+x moles Al with x ranging from zero to 70 by an electrothermal combustion. In the FGM products a nearly linear change in composition in the graded region was observed in samples with 0$\leq$ x $\leq$ 70 with x being the mole% Al.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.82-84
• /
• 1993

A method for simulating general characteristics and temperature characteristics of magnetizing fixture coil of the capacitor discharge impulse magnetizer-magnetizing fixture system using SPICE is presented. This method has been developed which can aid the design, understanding and inexpensive, time-saving of magnetizing circuit. As the detailed characteristics of magnetizing circuit can be obtained, the efficient design of the magnetizing circuit which produce desired magnet will be possible using our SPICE modeling. Especially, The knowledge of the temperature of the magnetizing fixture is very important to forecast the characteristics of the magnetizing circuits tinder different conditions. The capacitor voltage was not raised above 810[V] to protect the magnetizing fixture from excessive heating. The temperature estimation method uses multi-lumped model with equivalent thermal resistance and thermal capacitance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.102-105
• /
• 2000

A simple digital control system has been developed for the frequency stabilization of an internal mirror He-Ne laser. The system is based on one chip microprocessor with embedded Basic interpreter. To stabilize the laser output frequency, the signal such as power difference or beat frequency between two modes is supplied and processed by a microprocessor, and control signal is fed to the heating coil would round the laser tube for adjusting the spacing of the laser cavity mirror. Newly developed frequency stabilization system is totally digitized. The system and the frequency stability performance are briefly described.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.11a
• /
• pp.228-230
• /
• 2000

본 연구에서는 시청각 위주의 VR 멀티미디어 환경에 후각자극을 제시함으로써 더욱 현장감 있는 상황을 느낄 수 있는 칩타입 향 발생장치를 개발하였다. 셀마다 향과 Heating Coil을 함유하고 있는 IC 타입의 향 Container, DC Motor와 IC Holder를 포함하는 향 Housing, 전체적인 제어를 담당하는 Hardware Controller와 후각정보가 Encoding된 멀티미디어로 구성된다. 멀티미디어 매체 제작시 각 Object에 대한 Bounding Box를 설정하여 해당 영역에서만 향이 발산되도록 하였고 향발생장치를 Virtual Driving Simulator에 적용하여 화면의 영상과 함께 해당 향이 잘 발산되어 더욱 현실감 있는 VR 멀티미디어를 구현하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.560-564
• /
• 1996

In recently, annealing process of cold rolled sheet tend to change to continuous annealing process for improving qualify, saving yield. In the meantime as demand for various kind and small lot of products has been increasing, batch annealing has been appreciated for its small restriction for the operation. So, we tested on the effect for a hydrogen contents of atmospheric gas at annealing furnace. As a result of several investigation. We confirmed for the following characteristics ; improved productivity, uniform heating, improved surface quality, saving energy. Therefore, the use of hydrogen instead of nitrogen as the protective gas, combined with high convection in batch annealing furnaces, has shown that considerable increases in furnace output and material quality are attainable. Owing to the low density, high diffusion and reducing character of hydrogen, a better transfer resulting in uniform material temperatures and improved coil surfaces can be achieved.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.126-128
• /
• 2005

This paper presents a 3-D finite element analysis of a magneto-thermal coupled problem with moving conductor. In the magnetic and thermal analyses, temperature-dependent magnetic and thermal material properties were considered. Transient finite element method for analysis of moving conductor needs many number of elements and much time to make calculation. Therefore, in this paper, finite element formulation derived from quasi-state is adopted. Finite element results were compared with the experimental results. The results demonstrate that this approach is suitable to solve the magneto-thermal coupled problem.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.145-145
• /
• 2015

유도가열 코일 내부의 물질에 비접촉식으로 에너지를 전달하기 위하여 유도가열 코일에는 고주파 대전류를 투입하게 된다. 이러한 결과로 코일 자체에도 상당히 높은 수준의 발열이 발생하게 된다. 따라서 실제적으로 코팅물질의 발열을 위하여 전달되는 에너지 이외에 소모적으로 사용되는 에너지가 어쩔 수 없이 코일에 존재하게 된다. 이는 전자기코일의 효율을 낮추는 역할 뿐만 아니라 안정적인 운전을 저해하는 역할을 하게 된다. 본 논문에서는 전자기 및 온도 해석을 통하여 설계 제작된 유도가열 코일을 투입 전류를 바꾸며 실험하여 각 전류 투입시 코일에서의 발열량 및 온도 측정 결과를 해석 결과와 비교하여 유도가열 코일에 대한 평가를 수행 하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.55-55
• /
• 2014

도전체에 적절한 열을 가하기 위하여 상당히 높은 수준의 자기장을 이용한다. 이러한 높은 자기장을 만들기 위하여 유도가열 코일은 상당히 높은 고주파 전류를 이용하게 되는데, 이로 인하여 코일 자체에도 상당히 높은 발열이 발생하게 된다. 따라서 실제적으로 코팅물질의 발열을 위하여 전달되는 에너지 이외에 소모적으로 사용되는 코일에서 사용되는 에너지가 어쩔수 없이 존재하게 된다. 이는 전자기코일의 효율을 낮추는 역할 뿐만 아니라 안정적인 운전을 저해하는 역할을 하게 된다. 본 논문에서는 전자기 및 온도 해석을 통하여 유도가열 코일의 구조에 따른 효율 및 코일에서의 온도 분포등을 도출하여 전자기 유도가열코일의 설계에 이용하고자 한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.4
• /
• pp.460-464
• /
• 2004

In recent, there have been several developments in lamp technology that promise savings in electrical power consumption and improved quality of the lighting space. Above all, the advantage of ring-shaped electrodeless fluorescent lamp is the removal of internal electrodes and heating filaments that are a light-limiting factor of conventional fluorescent lamps. Therefore, the life time of ring-shaped electrodeless fluorescent lamps is substantially higher than that of conventional fluorescent lamps and last up to 60,000 hours and is intended as a high efficacy replacement for the incandescent reflector lamp in many applications. In this paper, maxwell 3D finite element analysis program (Ansoft) was used to obtain electromagnetic properties associated with the coil and nearby structures. The electromagnetic emitting properties were presented by D simulation software operated at 250KHz and some specific conditions. Photometric characteristic of the ring-shaped electrodeless fluorescent lamp were investigated using LS-100 lightmeter and TA-0510 thermometer respectively.