• Journal of the Korean institute of surface engineering
• /
• v.23 no.4
• /
• pp.218-224
• /
• 1990

Silicon nitride thin(SiNx) is deposited onto 3 inch silicon wafor using ECR plasma apparatus. For the two different plasma extraction windows size, the thin films which were deposited by changing the SiH4/N2 gas fole at at 1.5mTorr without substrate heating are analyzed through the XPS and wlliposometer measurements. The very uniform and good quality silicon nitride thin film were obtained with the analyzed results of the deposited films, and particularly, ion temperature perpendicular to the magnetic filed was nearly same as the neutral gas temperature. The large amount of plasma loss in the transport process following magnetic field lines could be seen from the plasma emission intensity measurements.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.645-648
• /
• 2005

The rotational barrel type equipment has been designed for the new rheology fabrication process. During the continuous rotation of barrel with a constant temperature, the shear rate is controlled with the rotation speed and rotation time of barrel. The barrel surface can be controlled the temperature by the induction heating and cooling system. Many experiments were widely examined by using this system with controlling the rotation speed and the rotation time. The possibility for the rheoforming process was investigated with microstructural characteristics.

• Journal of KSNVE
• /
• v.9 no.2
• /
• pp.265-272
• /
• 1999

A LMS algorithms has been widely used for an adaptive filter algorithm in active noise control systems. But this algorithm has poor convergence and it is very difficult to select optimal convergence parameters in this algorithm. In this paper, a fuzzy LMS algorithm where the convergence parameters are computed using a fuzzy logic controller was proposed. A proposed algorithm was applied to active noise control system in HVAC(central Heating Ventilation and Air Conditioning) ducts. The experimental ducts and experimental apparatus were designed and manufactured for experiments, and the modelling of the experimental ducts was also performed for computer simulations. Computer simulations and experiments were performed to show the effectiveness of a proposed algorithm.

• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.393-396
• /
• 2007

본 논문은 음식물류폐기물의 사료화 및 퇴비화 방법이 독성, 염분, 미숙성 등의 이유로 처리 여건이 어려운 데 대하여, 자체 처리열원으로 활용하여 경제성을 높이고 탈리액 처리 문제를 해결할 수 있는 방안을 제시한다. 2011년부터 유기성 폐기물이 해양투기가 금지됨에 따라 탈리액의 처리문제는 해결해야만 하는 문제로 제기되었으며, 2007년부터 시행되고 있는 함수율 95% 유지 조건은 새로운 처리비용의 증가로 이어졌다. 본 논문에서 제시하는 방법은 음식물류폐기물을 건조 후 자체 열원으로 사용하여 연료비를 획기적으로 줄이고, 탈리액 대신 경제적 효용가치가 있는 응축수를 만들어 해양투기에 의한 비용부담을 없애는 방법이며, 이전의 회분식 방법을 연속처리할 수 있도록 개량한 방법을 제시한다. 응축수는 액비로 사용가능하므로 완전 재활용이 가능하다.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1410-1419
• /
• 2019

In this research, it is to find a method that frost does not form on the outdoor unit to develop a heat pump capable of heating in cold regions. For this reason, we produced an incubator capable of creating an environment of -25℃, and constructed an experimental apparatus so that experiments in the room were possible. However, it is necessary to grasp the characteristics of the air reaching the front of the heat pump outdoor unit installed in the experimental apparatus, and flow analysis was performed using ANSYS CFX, which is general-purpose software. As a result, the flow velocity of the air reaching the front of the outdoor unit in the outdoor unit chamber in the entire region of the simulation conditions (5.0 to 7.5 m/s) has many differences in the upper and lower portions, resulting in a natural state. It turned out that the condition can not be satisfied. Therefore, it is determined that it is necessary to additionally install a frequency divider at the front of the outdoor unit to make the flow velocity constant.

• Journal of Advanced Engineering and Technology
• /
• v.4 no.4
• /
• pp.431-436
• /
• 2011

This study was carried out to reduce the problem during distillation process, which separate U, TRU (TRans Uranium) metal electro deposit, Cd and LiCl-KCl eutectic salt generating from LCC (Liquid Cadmium Cathode) electro winning process. The cadmium recovering apparatus was manufactured to separate for each metal using solid-liquid separation method. The apparatus consists of the first sieve for the separation of U and TRU metal electrodeposit, the second sieve for the separation of LiCl-KCl eutectic salt, cadmium collection basket, and a heating furnace. In addition, the size of each sieve is 2 mm to 3 mm. In this experiment, a metal wire was employed to replace TRU metal electrodeposit and U, which exist actually in a LCC crucible. In the solid state, The LiCl-KCl is separated at 340℃ at which the solid and the liquid of the remaining cadmium and LiCl-KCl eutectic salt coexists in each, after the metal wire separated at 500℃. As a result, it seems that it would be beneficial to set the processing condition in the distillation process with the additional treatment process of cadmium and LiCl-KCl eutectic salt.

• Culinary science and hospitality research
• /
• v.20 no.3
• /
• pp.201-213
• /
• 2014

This study showed the quality characteristics of chicken breast meat(CB) and leg meat(CL) with various kinds of existing cooking methods and double layer pan filled with Phase Change Materials(PCM) heating. Steaming resulted the highest moisture contents of 63.9% and 62.1% each in CB and CL. Also, steaming showed the lowest with 1.3% and 8.6% of crude fat in CB and CL(p<0.05) respectively. Crude protein content of CB in charcoal heating and grilling of CL had the highest values of 37.9% and 30.5% each. In the test of crude ash, grilling showed the highest with 2.4% in CB(p<0.05) and oven heating and charcoal heating was the highest with 1.3% in CL(p<0.05). In the test of cooking loss, charcoal heating showed much higher with 33.52% and 41.16% in CB and CL each than the other cooking treatments. And in case of shear force test, $5.93kg/cm^2$ in CB and $6.80kg/cm^2$ in CL were the highest scores in grilling. In the test of color, L value of CB prepared by steaming showed the highest scores of 78.31(p<0.05) while CL by oven heating was the highest of 10.00 in a value. In the overall acceptability test of 9 point-scale sensory evaluation, CB prepared by charcoal heating showed the highest score of 7.25 points in boiling, but the lowest score of 6.00 points in steaming(p<0.05). CL by charcoal heating resulted the highest score of 7.71 points but had no significant difference.

• Fire Science and Engineering
• /
• v.13 no.2
• /
• pp.26-32
• /
• 1999

We had investigated combustion pro야$\pi$ies of rice bran dusts. Decomposition of rice bran d dusts with temperature were investigated using DSC and the weight loss according to t temperature using TGA in order to find the thermal hazard of rice bran dusts, and the p properties of dust explosion in variation of their dust with the same particle size. Using H Hartman's dust explosion apparatus which estimate dust explosion by electric ignition after m making dust disperse by compressed air, dust explosion experiments have been conducted by v varying concen$\sigma$ation and size of rice br뻐 dust. According to the results for thermodynamic stability of rice bran dust, there are little change of initiation temperature of heat generation 때d heating value for used particle size. But i initiation temperature of heat generation decreased with high heating rate whereas d decomposition heat increased with particle size. Also, the explosion pressure was increased as t the ignition energy increased and average maximum explosion pressure was 13.5 kgv'cnt for 5 BJ/60 mesh and 1.5 뼈Ie미 dust concentration.

• Preventive Nutrition and Food Science
• /
• v.13 no.4
• /
• pp.334-339
• /
• 2008

This study was designed to determine the optimum conditions of heating temperature, heating time and dilution rates for producing heated garlic juice by using central composite design of response surface methodology. Garlic 3Department of Biosystems Engineering, Chungbuk National University, Cheongju 361-763, Korea was heated using a high temperature and pressure treatment apparatus. Total soluble solid contents ranged from 4.4 at $130^{\circ}C$ 3 hr and 6 fold dilution to 5.89 at $115^{\circ}C$ for 2 hr and 8 fold dilution. The highest total acidity was 0.55% at $120^{\circ}C$ for 3 hr and 2 fold dilution. The pH ranged from 4.01 at $130^{\circ}C$, 3 hr and 6 fold dilution to 5.85 at $120^{\circ}C$, 1 hr and 6 fold dilution. From the results of statistical analysis on the sensory evaluation the predicted optimum processing conditions for best color, taste, flavor and overall acceptance were $119.41^{\circ}C$, 3.11 hr, 5.85 fold dilution, $118.23^{\circ}C$, 3.57 hr, 3.15 fold dilution, $120.54^{\circ}C$, 3.47 hr, 5.01 fold dilution and $119.54^{\circ}C$, 3.18 hr, 5.66 fold dilution, respectively. The application of response surface methodology for preparing heated garlic juice processing showed a good correlation with high significance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.550-551
• /
• 2013

Large-area RF-driven ion source is being developed at Germany for the heating and current drive of ITER plasmas. Negative hydrogen (deuterium) ion sources are major components of neutral beam injection systems in future large-scale fusion experiments such as ITER and DEMO. RF ion sources for the production of positive hydrogen ions have been successfully developed at IPP (Max-Planck- Institute for Plasma Physics, Garching) for ASDEX-U and W7-AS neutral beam injection (NBI) systems. In recent, the first NBI system (NBI-1) has been developed successfully for the KSTAR. The first and second long-pulse ion sources (LPIS-1 and LPIS-2) of NBI-1 system consist of a magnetic bucket plasma generator with multi-pole cusp fields, filament heating structure, and a set of tetrode accelerators with circular apertures. There is a development plan of large-area RF ion source at KAERI to extract the positive ions, which can be used for the second NBI (NBI-2) system of KSTAR, and to extract the negative ions for future fusion devices such as ITER and K-DEMO. The large-area RF ion source consists of a driver region, including a helical antenna (6-turn copper tube with an outer diameter of 6 mm) and a discharge chamber (ceramic and/or quartz tubes with an inner diameter of 200 mm, a height of 150 mm, and a thickness of 8 mm), and an expansion region (magnetic bucket of prototype LPIS in the KAERI). RF power can be transferred up to 10 kW with a fixed frequency of 2 MHz through a matching circuit (auto- and manual-matching apparatus). Argon gas is commonly injected to the initial ignition of RF plasma discharge, and then hydrogen gas instead of argon gas is finally injected for the RF plasma sustainment. The uniformities of plasma density and electron temperature at the lowest area of expansion region (a distance of 300 mm from the driver region) are measured by using two electrostatic probes in the directions of short- and long-dimension of expansion region.