• Journal of agriculture & life science
• /
• v.45 no.2
• /
• pp.115-123
• /
• 2011

Seasoning gochujang sauces were prepared with 0, 10, 20 and 30% concentrated heating chopped garlic (garlic base) and analyzed. These seasoning gochujang storage for 40 days at $37{\pm}1^{\circ}C$ and examined for changes in their physicochemical properties. Hunter color L and b-value of seasoning gochujang were decreased slowly till 20 days of storage then increased afterward. The highest pH of the seasoning gochujang was pH 5.22 in the 30% garlic base added group. The titratable acidity increase significantly till 40 days of storage. As the adding ratio of garlic base increased, reducing sugar content was decreased. The amino-nitrogen content was continually decreased during aging up to 40 days. ABTs radical scavenging activity was increased as garlic base addition level was increased. The activity was decreased with passing by storage period, and below 50% at 40 days storage.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1252-1257
• /
• 2011

Number of crop residues generated at large amount in agriculture can be utilized as substrate in methane production by anaerobic digestion. Greenhouse vegetable crop cultivation that adopting intensive agricultural system require the heating energy during winter season, meanwhile produce waste biomass source for the methane production. The purpose of this study was to investigate the methane production potential of greenhouse vegetable crop residues and to estimate material and energy yield in greenhouse system. Cucumber, tomato, and paprika as greenhouse vegetable crop were used in this study. Fallen fruit, leaf, and stem residues were collected at harvesting period from the farmhouses (Anseong, Gyeonggi, Korea) adopting an intensive greenhouse cultivation system. Also the amount of fallen vegetables and plant residues, and planting density of each vegetable crop were investigated. Chemical properties of vegetable waste biomass were determined, and theoretical methane potentials were calculated using Buswell's formula from the element analysis data. Also, BMP (Biochemical methane potential) assay was carried out for each vegetable waste biomass in mesophilic temperature ($38^{\circ}C$). Theoretical methane potential ($B_{th}$) and Ultimate methane potential ($B_u$) off stem, leaf, and fallen fruit in vegetable residues showed the range of $0.352{\sim}0.485Nm^3\;kg^{-1}VS_{added}$ and $0.136{\sim}0.354Nm^3\;kg^{-1}VS_{added}$ respectively. The biomass yields of residues of tomato, cucumber, and paprika were 28.3, 30.5, and $21.5Mg\;ha^{-1}$ respectively. The methane yields of tomato, cucumber, and paprika residues showed 645.0, 782.5, and $686.8Nm^3\;ha^{-1}$. Methane yield ($Nm^3\;ha^{-1}$) of crop residue may be highly influenced by biomass yield which is mainly affected by planting density.

• Journal of Conservation Science
• /
• v.37 no.2
• /
• pp.179-189
• /
• 2021

In this study, the research objects are gilt plated silver-iron nails excavated from the west of the tombs in Neungsan-ri, Buyeo. A gilt plated silver-iron nail was fabricated by combining silver and iron via heating and then gilding amalgam on top of this combination, demonstrating that this ancient artifact that can be replicated using current technology. Since the metal (Au, Ag) surface of these gilt plated artifacts are covered with iron oxide, which slips into the cracks and scratches of the artifacts as well, desalination is essential. Based on the results of the preliminary experiment, the research objects were classified into grades A, B, and C, according to the degree of corrosion and then desalinated using an alkali solution (NaOH, Sodium Sesquicarbonate of 0.1 M) at 60℃. The results demonstrate that the more serious is the degree of corrosion, the more is the amount of Cl^- detected. Further, more Cl^- was released when NaOH was used than when sodium sesquicarbonate was used, for all grades except Grade A. Furthermore, the more serious is the degree of corrosion, the longer is the desalination period and the reaction with NaOH for all grades except Grade A. A comparison of the Fe composition of the surface before and after desalination shows that Fe composition is the use of NaOH resulted in a smaller increase compared with the use of sodium sesquicarbonate, for all grades except Grade B. However, four of the nails were damaged owing to NaOH (Grade B 3ea, Grade C 1ea) during desalination. Thus, Cl^- ions are more stably released when sodium sesquicarbonate is used than when NaOH is used.

• Journal of Environmental Analysis, Health and Toxicology
• /
• v.21 no.4
• /
• pp.220-228
• /
• 2018

$PM_{2.5}$-bound mercury (PBM) was monitored at weekly intervals for three years (from 2014 to 2016) at an urban (Seoul) and rural site (Baengnyeong) in South Korea. The average PBM concentrations in $PM_{2.5}$ samples over the entire sampling period were $12{\pm}11pg/m^3$ and $36{\pm}34pg/m^3$ for Baengnyeong and Seoul, respectively. Seasonal differences were pronounced, with concentrations being highest in winter due to local meteorological conditions (high gas-particle coefficient due to low temperature and low mixing layer height in winter) as well as seasonal factors, such as coal combustion for heating purposes in China. In Baengnyeong, the significant positive correlation of PBM with $PM_{2.5}$, air pollutants, and heavy metals suggested that coal combustion in China might be the most important source of ambient mercury in Korea. In winter, no correlation of PBM with $PM_{2.5}$, air pollutants, and heavy metals was seen in Seoul. Furthermore, Seoul showed higher $PBM/PM_{2.5}$ and $Pb/PM_{2.5}$ ratios in winter due to the strong atmospheric oxidation-reduction reaction conditions as well as local and regional PBM sources. We conclude that immediate attention must be given to addressing PBM levels in Korea, including considering it as a key component of future air quality monitoring activities and mitigation measures.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.19 no.3
• /
• pp.1-13
• /
• 2023

Hydronic heated road pavement (HHP) systems have been well established and documented to provide road safety in winter season over the past two decades. However, most of the systems run on asphalt, only a few are tested with concrete, and there rarely is a comparison between those two common road materials in their performance. The aim of this study is to investigate the thermal performance of the concrete HHP systems, including surface temperature variations of experimental pavements in winter season. For preliminary study a small-scale experimental system was installed to evaluate the heat transfer characteristics of the concrete HHP in the test field. The system consists of 3 concrete slabs made of 1 m in width, 1 m in length, and 0.25 m in height. In these slabs, circulating water piping was embedded with different pipe depths of 0.08 m (Case A), 0.12 m (Case B), and 0.20 m (Case C) and same horizontal space of 0.16 m. Heating performance in winter season was tested with different inlet temperatures of 25℃, 30℃, 35℃ and 40℃ during the entire measurement period. Overall, the surface temperature of the concrete HHPs remained above 3℃ in all experimental conditions applied in this study. The results of the surface temperature measurement with respect to the pipe depth showed that Case B was the highest among the three cases. However, the closer the circulating water pipe was to the pavement surface, the greater the heat exchange rate. This results is considered that the heat is continuously accumulated inside the pavements and then the temperature inside the pavements increases, while the amount of heat dissipation decreases as the temperature difference between the inlet and outlet of circulating water decreases. In this preliminary test the applicability of the concrete HHP on road deicing was confirmed. Finally, the results can be used as a basis for studying the effects of various variables on road pavements through numerical analysis and for conducting large-scale empirical experiments.

• Resources Recycling
• /
• v.15 no.3 s.71
• /
• pp.38-45
• /
• 2006

The thermal filter press dewatering(TFPD) technology to improve the dewaterability through increasing the inner vapor pressure, lowering the filtration viscosity and forming the porosity easily within cake as applying the heat at the sludge layer was developed in this study. The hot water with temperature of $95^{\circ}C$ and pressure of $1.2kg_f/cm^2$ was supplied to the heating plate equipped between filter plates with plate size of $470{\times}470mm$ and material of polypropylene. Sludge was dewaterd by supplying pressure of $5kg_f/cm^2$ and then by squeezing pressure of $15kg_f/cm^2$. As a results of estimating the characteristics of thermal dewatering to consider the initial water content and organic content to be influenced by a period of water shortage and rainwater, the dewatered cake water content was about 35 wt% and dewatering velocity was $4DSkg/m^2{\cdot}hr$ under the rainwater period, and the dewatered cake water content was about 50 wt% and dewatering velocity was $1.5DSkg/m^2{\cdot}hr$ in the case of sludge of water shortage season. These results was superior to the mechanical dewatering performance with water content of 70wt% and dewatering velocity of $0.9DSkg/m^2{\cdot}hr$. On the base of the results of TFPD, energy consumpted to deal with DS(Dry Solid) of 1kg was estimated by 300 kJ. It was analyzed that the energy consumption of TFPD was decreased about one third with comparison to the dryer system. Dewatering velocity of this technology was faster than the one of mechanical dewatering equipment and it was easier to product low water content cake. Therefore, this technology was recognized that dewaterability was predominant because of the fast of dewatering velocity and production of low water content cake, and also this known as economical efficiency was excellent because of low energy consumption in comparison with dryer.

• Korean Journal of Poultry Science
• /
• v.40 no.2
• /
• pp.105-113
• /
• 2013

The present study was performed to assess the worth of using the by products for seaweed (Eucheuma spinosum) ethanol production process (SEPPB) as broiler feeds. For this purpose, 225 broiler chicks (white mini broilers) were used as experimental animals. The control (Control group) was fed with the broiler feeds. 5% mixture (5% SEPPB group) was fed with a 5% SEPPB mixture feeds, and the 10% mixture (10% SEPPB group) was fed with a 10% SEPPB group mixture feeds. The experiment was repeated for five times and 15 birds were assigned in each experiment and the experimental period was five weeks. There was no difference in the rate of weight gain until the second week of the 5% SEPPB group and 10% SEPPB group. However, the weight gain rate was increased to 6.2% for the 5% SEPPB group and 11.4% for the 10% SEPPB group as compared to the Control group at the third weeks of the experimental period. There was no statistical significant difference in terms of feed FCR and feed intake. Analyses of the quality of chicken breasts showed that pH was 2.5% higher in the 5% SEPPB group and 2.3% higher in the 10% SEPPB group. Shearing force was 31.3% lower in the 5% SEPPB group and 14.7% lower in the 10% SEPPB group, while heating loss was 14.4% lower for 5% SEPPB group and 10% SEPPB group when compared to the Control group. No significant differences were observed in terms of moisture, protein, and crude ash components in chicken breast analyses. However, crude fat was 36.8% higher in the 5% SEPPB group when compared to the Control group (P<0.05). Analyses of fatty acid in chicken breast meat showed that stearic acid was significantly higher in the 10% SEPPB group (P<0.05) and linolenic acid was significantly higher in 5% SEPPB group and 10% SEPPB group in comparison to the Control group (P<0.05). Interleukin-2 (IL-2) in blood serum was 44% higher in the 5% SEPPB group and 36% higher in the 10% SEPPB group (P<0.05). Interleukin-6 (IL-6) was similar in both the Control and the 5% SEPPB group, but it was 62% higher in the 10% SEPPB group in comparison to the Control group (P<0.05). Analyses of serum chemical values revealed that albumin was the highest in the 5% SEPPB group, followed by the Control group and then 10% SEPPB group.

• Journal of agricultural medicine and community health
• /
• v.12 no.1
• /
• pp.5-27
• /
• 1987

It is widely recognized that primary health care in the community is one of the most important and effective health measures in these days. However, it is reality that unsatisfactory health care system, ineffective utilization of health care by the community people in the rural area are hampering better understanding for primary health care. Therefore promoting health for the rural people and increasing understanding about primary health care, the baseline survey in the community focused in examination for safe community water supply was carried out. The survey was conducted through August 25-31, 1986 in order to find out health problems and relevant factors and to define the demographic characteristics of $^*$Sanpuk village, Kumsa-Myun, Yuju-Gun, Kyunggi-Do, Korea. Household survey was carried out for every home by trained interviewers. The major results are found out as follows : 1) 84.2%(400 houses) of total households were surveyed because 15.8%(75 houses) were unable to survey due to either refusal against interview or absence of family. These 400 households were composed of 1,697 residents(male:830, female 867). Educational level of respondents showed 34.1% as elementary school graduated. Religion distribution showed Buddism(23.8%) as the most dominant. 50.7% of respondents married in the area. 2) Most households(91.5%) have lived in their own house in Sanpuk area. Average family size showed 4.3. More than half of residents(64.2%) have used public supplied water tap. Only 1.5% of the households had a flush toliet. The rest of households have still used primitive insanitary latrines. 3) 32.5% of residents have used gas burner for cooking and for heating in the house, and the coal briquet were used for boiler. Lack of convenient public transportation was the chief complaint for their day life. 4) Each household occupied 1,990 pyungs of rice paddy and 1,170 pyungs of ordinary field in average. Beside farming products, mushroom was the highest product. 5) Sixth percent of households in the survey area regularly participated in community meeting one hand and on the other hand 39.5% never participated. Most of respondents closely contacted with their neighbours and they seemed very friendly each other. 6) The prevalence rate of illness and injury during recent 15 days showed 48.3 per 1,000. The prevalence rate of chronic illnesses during the past one year showed 74 per 1,000. Injury and accident lead the higher portion(22.0%) in the former and in the latter pain(arthritis, back-pain) showed 27.0% as the dominant sickness. 87.8% of the ill residents in the former received medical treatment. As the most frequently utilized medical facility, the clinic or hospital were counted. Among the residents suffering from chronic illnesses, 77.3% in Sanpuk area get some kind of medical treatments and they rarely utilized the clinic or hospital. The reason why the patient did not receive any medical care was found out the fact that symptoms of illness was light or mild and economic problems was serious. 7) Average age of marriage showed 21.6 years old in the women and the average duration of marital period was shown for 15.1 years. The married woman in reproductive age in Sanpuk area had experienced pregnancies 4 times in the aver-age including 0.7 time of pregnancy in average were interrupted by induced abortion and 0.3 time by spontaneous abortion respectively. The practicing rate of the family planning of the married woman during reproductive ages showed 70.7% and the tuballigation was found out as the most frequently used contraceptives. 8) Among woman who has children under 2 years old, 70.0% had received the prenatal care for the last pregnancy. However, the average number of prenatal care visitis per woman showed 3.3 times. Fifty-two % of woman who received the postnatal care for the last delivery showed only 37.5%. 9) Immunization rate of the children under 2 years old showed relatively high and looked successful. The breast feeding for these children showed dominantly in the most. Most of the mothers in Sanpuk area had started the supplementary diet during weaning period of their infants of 6th and 7th month after birth. * : Sanpuk area is a demstration area for community development which has been supported by the Community Development Foundation during the part 10 years. The village is relatively closer to urban area such as Seoul, However, it has a similar characteristics shown as a remote village because of geographical location and inconvenient transportation at present.

• Journal of Mushroom
• /
• v.17 no.4
• /
• pp.197-204
• /
• 2019

In this study, smart farm technology was used by farmers cultivating 'CHIKUMASSHU T-011' in order to develop an optimal growth model for the precision cultivation of bottle-grown winter mushroom and the results of the same are mentioned herein. Farmers participating in the experiment used 60 ㎡ of bed area with 4 rows and 13 columns of shelf shape, 20 horsepower refrigerator, 100T of sandwich panel for insulation, 6 ultrasonic humidifiers, 12 kW of heating, and 20,000 bottles of Flammulina velutipes mushroom spores. The temperature, humidity, and carbon dioxide concentrations, which directly affect the growth of the mushroom, were collected and analyzed from the environmental sensors installed at the winter mushroom cultivation area. The initial temperature was found to be 14.5℃, which was maintained at 14℃ to 15℃ until the 10th day. In the restriction phase, the initial temperature was 4℃ and was maintained between 2℃ and 3℃ until the 15th day, while during the growth phase, it was maintained between 7.5℃ to 9.5℃. Analysis of the humidity data revealed initial humidity to be 100%, which varied between 88% to 98% during primordia formation period. The humidity remained between 77% to 96% until the 15th day, in the restriction phase and between 75% to 83% during the growth phase. The initial carbon dioxide concentration was 3,500 ppm and varied between 3,500 ppm to 6,000 ppm during primordia formation period and was maintained at 6,000 ppm until the 15th day. During the growth phase, the carbon dioxide concentration was found to be over 6,000 ppm. Fruiting body characteristics of 'CHIKUMASSHU T-011' cultivated in the farmhouse were as follows: Pileus diameter of 7.5 mm and thickness of 4.1 mm, stipe thickness of 3.3 mm, and length of 154.2 mm. The number of valid fruiting bodies was 1,048 unit per 1,400 mL bottle, and the individual weight was 0.71 g per unit. The yield of fruiting bodies was 402.8 g per 1,400 mL bottle.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.2
• /
• pp.61-71
• /
• 2009

Most deciduous trees in temperate zone are dormant during the winter to overcome cold and dry environment. Dormancy of deciduous fruit trees is usually separated into a period of rest by physiological conditions and a period of quiescence by unfavorable environmental conditions. Inconsistent and fewer budburst in pear orchards has been reported recently in South Korea and Japan and the insufficient chilling due to warmer winters is suspected to play a role. An accurate prediction of the flowering time under the climate change scenarios may be critical to the planning of adaptation strategy for the pear industry in the future. However, existing methods for the prediction of budburst depend on the spring temperature, neglecting potential effects of warmer winters on the rest release and subsequent budburst. We adapted a dormancy clock model which uses daily temperature data to calculate the thermal time for simulating winter phenology of deciduous trees and tested the feasibility of this model in predicting budburst and flowering of Niitaka pear, one of the favorite cultivars in Korea. In order to derive the model parameter values suitable for Niitaka, the mean time for the rest release was estimated by observing budburst of field collected twigs in a controlled environment. The thermal time (in chill-days) was calculated and accumulated by a predefined temperature range from fall harvest until the chilling requirement (maximum accumulated chill-days in a negative number) is met. The chilling requirement is then offset by anti-chill days (in positive numbers) until the accumulated chill-days become null, which is assumed to be the budburst date. Calculations were repeated with arbitrary threshold temperatures from $4^{\circ}C$ to $10^{\circ}C$ (at an interval of 0.1), and a set of threshold temperature and chilling requirement was selected when the estimated budburst date coincides with the field observation. A heating requirement (in accumulation of anti-chill days since budburst) for flowering was also determined from an experiment based on historical observations. The dormancy clock model optimized with the selected parameter values was used to predict flowering of Niitaka pear grown in Suwon for the recent 9 years. The predicted dates for full bloom were within the range of the observed dates with 1.9 days of root mean square error.