• Journal of Animal Environmental Science
• /
• v.21 no.3
• /
• pp.105-112
• /
• 2015

This study was conducted to establish the research direction of heat stress in dairy cows by searching papers and patents. Research papers published before 2014 through National Digital Science Library (NDSL) and patents registered with United States Patent and Trademark Office (USPTO), Japan Patent Office (JPO), European Patent Office (EPO) and Korean Intellectual Property Office (KIPO) were investigated using the key words of heat stress index, genetics, facilities and feed. The research trend for heat stress in dairy cows was analyzed with 182 papers and 282 patents. Global warming due to increased atmospheric concentration of greenhouse gases is a major interest in recent years. The papers related with heat stress in cattle were increased after 2006. Besides, patents connected with facilities and feed will be increased due to development of ICT. In particular, the various studies including patents about heat stress in dairy cows will be needed to conduct because the climate of southern Korean peninsula is changing from temperate to subtropic.

• Journal of Veterinary Clinics
• /
• v.37 no.5
• /
• pp.235-241
• /
• 2020

We aimed to determine the effect of timed artificial insemination (TAI) protocols on the pregnancy rate per insemination and pregnancy loss compared with AI performed at detected estrus in dairy cows and Korean Hanwoo cattle under heat stress. In dairy cattle, 1,250 sets of data that underwent AI during heat stress (temperature-humidity index ≥ 72) were categorized according to their TAI protocols or as controls: 1) PGF_2α-36 h-estradiol benzoate (EB)-36 h-TAI (PG-EB group, n = 113); 2) GnRH-7 days-PGF_2α-56 h-GnRH-16 h-TAI (Ovsynch group, n = 455); or 3) GnRH-6 days-Ovsynch (G6G group, n = 136). The remaining cows underwent AI at detected estrus (AIDE group, n = 546). The probability of pregnancy per AI 45 days after AI was higher (P < 0.01) in the PG-EB (odds ratio [OR]: 1.68), Ovsynch (OR: 1.48), and G6G (OR: 1.79) groups than in the AIDE group. However, the prevalence of pregnancy loss between 30 and 45 days after AI did not differ among the groups. In Hanwoo cattle, 617 sets of data inseminated artificially under heat stress were categorized into AIDE (n = 281), PG-EB (n = 194), and combined Ovsynch or G6G (n = 142) groups. The probability of pregnancy per AI 45 days after AI and the prevalence of pregnancy loss between 30 and 45 days after AI did not differ among the groups. Thus, implementation of a TAI protocol (PG-EB, Ovsynch, or G6G) in dairy cows under heat stress improves the pregnancy rate per AI versus AIDE, whereas there is no beneficial effect of TAI on the pregnancy rate of Hanwoo cattle under heat stress.

• Journal of Welding and Joining
• /
• v.11 no.4
• /
• pp.103-111
• /
• 1993

Recently, several high-tensile steels(e.g. 80kg and above, $2^{1/4}Cr$-1Mo)having good quality to high temperature and pressure-resistance are widely used to construct petroleum-plant and pressure vessel of heat or nuclear-power plant. However, in the steels, reheating crack at grain boundaries of the heat affected zone(HAZ) occures during post welding heat treatment(PWHT)to remove welding residual stress. In order to study theoretically the characteristics of reheating crack created by PWHT, the computer program of three-dimensional thermal-elasto-plasto-creep analysis based on finite element method are developed, and then the mechanical behavior(history of creep strain accumulation and stress relaxation, etc)of welded join in thick plate during PWTH is clarified by the numerical results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.92-98
• /
• 2001

We determined the transfer coefficient through the analysis of three dimensional temperature distribution in comparison with the measured temperature on the piston in the turbocharged diesel engine. And we analyzed the thermal stress and the thermal deformation with that heat transfer coefficient by using finite element method. According to this results, we found that maximum tempetature range of the piston appeared at the upper part of the piston crown and that the heat transfer coefficient of the upper part of the piston is smaller than that of the lower one. It showed that the maximum thermal deformation is shown at the edge of the upper part of piston and that the maximum thermal stress was shown on the lower part of the piston crown. Finally, we defined the method of determination of a piston heat transfer analysis by using measured temperature on the piston and analyzed temperature with finite element method.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.6
• /
• pp.336-341
• /
• 2004

The effect of shot peening conditions on the fatigue properties of heat-treated spring steel has been investigated by using residual stress measurement and metallography. The mechanical properties of material did not change so much by shot peening. However, the fatigue strength and fatigue life increased about 20% to 40% by 1-step and 2-step shot peening process. The fatigue strength and life were closely related to the value and position of maximum compressive residual stress by shot peening process. In the case of warm shot peening, compressive residual stress of specimens shot peening processed at $200^{\circ}C$ was higher than those of specimens shot peening processed at room temperature, $100^{\circ}C$ and $300^{\circ}C$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.267-275
• /
• 1998

In this study, the instantaneous heat flux measurement probe and the linkage system for the measurement of the instantaneous temperature and heat flux of the DI mono cylinder diesel engine were developed, and these were proved to have a good reliability and sensibility. A 3-D FEM model which consist of full piston to accommodate the eccentric bowl in the piston head, was applied for the analysis of the thermal stress and the temperature distribution. The mean heat flux on the piston head was used as boundary condition for the analysis of piston. The analysis showed that thermal stress concentrate on the bowl and inner surface of pin hall.

• Corrosion Science and Technology
• /
• v.18 no.2
• /
• pp.49-54
• /
• 2019

The purpose of this paper is to present failure analysis, of the heat exchanger tube in a district heating system. SS304 stainless steel is used, as material for the heat exchanger tube. The heat exchanger operates in a soft water environment containing a small amount of chloride ions, and regularly repeats operation and standstill period. This causes concentration of chloride ions on the outer surface of the tube, as well as repeat of thermal expansion, and shrinkage of the tube. As a result of microscopic examination, cracks showed transgranular as well as branched propagation, and many pits were present, at the initiation point of each crack. Energy disperstive spectroscopy analysis showed Fe and O peak, as well as Cl peak, meaning that cracks were affected by Cl ion. Failure of the tube was caused by chloride-induced stress corrosion cracking by thermal stress, high temperature, and localized enrichment of chloride ions.

• Journal of Animal Reproduction and Biotechnology
• /
• v.36 no.4
• /
• pp.220-229
• /
• 2021

Lonicera caerulea (Honey berry, HB) has been used in medical treatment in Russia, Japan, China and Korea. It has high level of vitamin C and polyphenolics. Polyphenolics can improve anti-inflammatory effect and prevent cancer, diabetes mellitus type 2. Also, Vitamin C is a representative anti-oxidant. however, it is still unknown what effect it will have on the oxidation stress of the reproductive system. In previous studies, ROS can be produced when it is exposed to heat stress and has negative effect on sperm's maturation, capacitation, hyperactivation, acrosome reaction and fusion of egg and sperm. Therefore, the purpose of this study is to investigate the antioxidant effects of L. Caerulea on the sperm and mice. At first, it conducted using ICR mouse (n = 20) for 4 weeks. There are four groups of mice (n = 5 per group). Also, L. Caerulea was taken by oral gavage. Group I (control) kept at 23℃-27℃ and administer D.W (0.5 mL/day), Likewise, Group II (HB) kept at room temperature but gave HB (250 mg/kg, 0.5 mL/day), Group III (HB + HS) received heat stress (40℃) using hyperthermia induction chamber and gave HB at same dose. and Group IV (HS) exposed heat stress only. Mainly, we showed degree of gene expression using Western blot in SOD, HSP 70, 17β-HSD and Real-time PCR. It can find correlation between intracellular activity like steroid hormone, apoptosis under ROS and antioxidant activity of L. Caerulea.

• Computers and Concrete
• /
• v.19 no.6
• /
• pp.701-710
• /
• 2017

In this study, the thermoelastic beam in modified couple stress theory due to laser source and heat flux is investigated. The beam are heated by a non-Guassian laser pulse and heat flux. The Euler Bernoulli beam theory and the Laplace transform technique are applied to solve the basic equations for coupled thermoelasticity. The simply-supported and isothermal boundary conditions are assumed for both ends of the beam. A general algorithm of the inverse Laplace transform is developed. The analytical results have been numerically analyzed with the help of MATLAB software. The numerically computed results for lateral deflection, thermal moment and axial stress due to laser source and heat flux have been presented graphically. Some comparisons have been shown in figures to estimate the effects of couple stress on the physical quantities. A particular case of interest is also derived. The study of laser-pulse find many applications in the field of biomedical, imaging processing, material processing and medicine with regard to diagnostics and therapy.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.1
• /
• pp.113-123
• /
• 1997

The welding residual stresses produced by welding frequently cause a crack and promote stress corrosion etc. in heat affected zone contained with external load and weakness of material. For the purpose pof relaxation of welding residual stress, post welding heat teratment(PWHT) is widely used. In this paper, the computer program which is based on Thermal-Elasto-plastic-creep theory for plane deformation on developed by finite element method (F.E.M) and verified its propriety by experimental measurement and also by using the developed computer program. The mechanical behavior of butt welding joint is clairfied during PWHT.