• Journal of the Korea Institute of Building Construction
• /
• v.18 no.6
• /
• pp.551-558
• /
• 2018

This study evaluate the fluidity and hardening properties of mortar by replacement ratio of ferronickel slag powder to estimate the applicability of ferronickel slag powder for cement replacement materials. Ferronickel slag powder was replaced by 0, 5, 10, 15 and 20% of the cement weight. In addition, blast furnace slag powder and fly ash were also used for comparing with the mixtures using ferronickel slag powder. As the test results, the micro-hydration heat of the mixture containing the ferronickel slag powder was lower than that of the mixtures containing the same amount of blast furnace slag powder and fly ash. The flow of the sample with ferronickel slag powder was relatively higher than the other mixtures. In all ages, the compressive strength of the mixture with ferronickel slag powder and fly ash was similar to that of the mix containing only fly ash. In case of drying shrinkage, the mixture containing ferronickel slag powder exhibited lower drying shrinkage than the mixture using blast furnace slag powder, and similar to the mixture containing fly ash.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.1
• /
• pp.139-146
• /
• 2022

Mountain accidents such as forest fires and missing people are increasing as hikers increase due to indoor activities restrictions caused by the prolonged COVID-19 incident. If a dangerous situation occurs at outside where rescue workers cannot reach, the search time for person can be reduced using a quadcopter. Considering this, in this paper, Multiwii is used to smoothly hover the quadcopter by setting optimized PID values of the x-axis, y-axis, and z-axis (Yaw) according to the change in the inclination of the gas. In addition, after installing Open CV on Raspberry Pie, the camera uses HSV color space to filter the color such as the description of the person, and uses a thermal imaging camera to receive thermal sensing images in real time in environments where color extraction is difficult. As a result, it was confirmed that hovering was possible at a height of 2 to 8 m, blue extraction was possible at a height of 5 m, and heat detection was possible at a distance of less than 10 cm.

• Knowledge Management Research
• /
• v.24 no.1
• /
• pp.195-221
• /
• 2023

As the global energy and climate crisis has complicated interests of each country, the agenda that requires a global response has recently been revived. In particular, Korea is highly dependent on energy imports and continues to have high energy consumption, low efficiency of energy consumption, and high greenhouse gas emissions, so innovative and effective energy policies are urgently needed to achieve energy efficiency and carbon neutrality. In this study, among the changes in distributed district energy policy after the integrated energy method was introduced in Korea in the mid-1980's, the case of the "National Heat Map Project" policy implementation is analyzed with a modified multi-flow model. The 10 years of the Lee Myung-bak and Park Geun-hye administrations, the period of study, was a period in which the main paradigm of energy policy shifted to a "distributed energy platform" and policy transitions such as policy agenda setting, policy drift, and policy revision were made. A study on the process would be meaningful.

• Journal of radiological science and technology
• /
• v.16 no.1
• /
• pp.101-106
• /
• 1993

In order to assure safety of both patient and operator, and to provide uniform quality radiographs, it is necessary to perform periodic calibration of diagnostic X-ray equipment. A basic parameter of diagnostic equipment's and its image sharpness is the size(and shape the energy distribution) of the focal spot as viewed along the central X-ray beam. This size determines the resolution possible with the equipment and also determines the heat characteristics of an anode. A fine focus tube gives high resolution but causes high local heating of target. In past, the pin-hole and star pattern image measurement for evaluation of resolution have been widely used, but it produced blurring and inaccuracy of image. So newly inverted Ug-meter has advantage in more convenient measurement method and less out-put bias than other image measurement. The authors intended to compare measured focal size between Ug-meter and focal spot test tool, changed state from setting to now of units.

• Journal of Environmental Science International
• /
• v.12 no.6
• /
• pp.605-613
• /
• 2003

In order to make use of the protection effect against wind by the vegetation, it examined whether it should make what vegetation form and arrangement using the 2-dimensional non-hydrostatic model. When the foliage shielding factor increases, it becomes hard to take in protection effect against wind in a residential section. When it makes height of vegetation high, it becomes hard to take in protection effect against wind with height. In the comparison in the case where vegetation high is gradually made low toward wind-stream from a vegetation, and the case of making it low gradually, although former tends to receive the protection effect against wind by the vegetation, attenuation of wind velicity becomes large. In the comparison in the case where foliage shielding factor and distribution of density of leaf are gathered gradually toward wind-stream from a vegetation. It has been understood to evaluate to height the influence that the vegetation multi-layer model by which the heat revenue and expenditure in the direction of the vegetation height is considered is used, and to characterize the vegetation group by the parameter setting.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1859-1869
• /
• 2010

This study provides improved wrinkle recovery and UV protection capabilities as well as an antibacterial and deodorizing function to linen fabrics for summer shirts. The results obtained from this study are as follows. By setting catalyst concentration to 1.2% and DMDHEU concentration to 6% respectively and applying a heat treatment to them at $160^{\circ}C$ for 5 minutes, the decrease of fabric strength could be minimized and the crease resistance of linen fabrics improved. Compared to the treatment with DMDHEU only, the crease resistance of linen fabrics could be maintained and degradation of their properties could be more effectively prevented by applying the mixture of the UV absorber and the nano silver to the DMDHEU resin. The UV protection of fabrics could be improved by adding the UV absorber. Although the separate treatment of resin or the nano silver had no effect on the improvement of the UV protection properties for treated fabrics, they could increase the UV protection capability when they were combined with the UV absorber. Linen fabrics could possess an antibiosis and deodorizing capability by applying the mixture of the UV absorber, the nano silver, and the resin. The UV protection, crease resistance and flexibility of finished fabrics were maintained even after laundering. Washed treated fabrics maintained excellent antibiosis and odor free capabilities compared to untreated fabrics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.581-584
• /
• 2005

A district heating(DH) system supplies environmentally-friend heat and is appropriate for reduction of energy consumption and/or air pollutions. The objectives of this paper are to systematize data processing of transition temperature, investigate its effects on fatigue life of DH pipes and optimization for size of DH pipes. A relational database management system as well as reliable fatigue life evaluation procedures is established for Korean DH pipes. Also, since the prototypal evaluation results satisfied both cycle-based and stress-based fatigue criteria. Through the optimum design process, the cross section diminished 18.64% and the CUF diminished 23.35%. So, it can be used as useful information in the future for optimal design, operation and energy saving via setting of efficient condition and stabilization of water temperature.

• Journal of Fashion Business
• /
• v.9 no.1
• /
• pp.1-20
• /
• 2005

This study is purposed to provide new idea for developing high value added fashion goods by studying relief effects of fashion design. Based on prior researches, various ways to give relief effects were searched and then modern fashion design cases were looked for which were referred to fashion-related magazines and collection-related internet sites since the late 1990s. The ways for relief effects are weaving, industrial finishing, sewing technique. Weaving techniques are about fancy yarns, variation of weaving structure, pile weave. Industrial finishing techniques which can make relief effects are embossing, heat-setting, shearing, pliss, burn out, flocking. Sewing techniques are quilting, pleats, embroidery, slash, attachment in accordance with the way to produce relief effects. The forms of relief effects are tactile pattern that cannot be seen in the distance, subtle relief pattern which is more three-dimensional than tactile pattern, rhythmical relief pattern, sculptural pattern, and deep-volumed pattern. The present research can provide practical data for design by studying techniques of relief effects and collecting and arranging design cases that have been sporadically carried out. The study on relief and unique surface effects can be a way to effectively stimulate and express emotions of modern people with various taste and individuality.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.2
• /
• pp.51-62
• /
• 2004

Architects may evaluate building models to see how a building will shadow itself and its neighbors at various times. A heliodon, a tilt-table which is a machine that imitates the rotation and orbit of the Earth, helps architects wanting to analyze patterns of shadow patch, passive solar heating options, site solar panels, or control solar heat gain. The heliodon swivels in three directions for setting latitude, season, and time of day. Using the device, an architect first clamps a model to the tabletop, then turns the table to the coordinates of interest. Usually, the winter and summer solstices receive strong attention, for they represent extreme cases, A more recent installation at a university adds to its heliodon a set of lamps to recreate the illumination level and more accurate patterns of shadow patch. The table holds the building model at various angles to a spotlight, which mounts in the pole. The set of scale model measurement describes the validity of various electric lamps as an artificial sun to approximate the sun's parallel rays, helping designers to distinguish between illuminated areas in and around a building and those regions falling in the shadows.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.957-960
• /
• 2008

In this study, it was investigated fire resistance properties of high strength concrete column using Engineered Cementitious Composites(ECC) permanent form as a countermeasure for explosive spalling of concrete on fire. As a test result, it was appeared that ECC permanent form is available as fire resistance method of high strength concrete if it is developed manufacturing technique and scheme for application controlling heat penetration through interface of permanent form and high strength concrete, and setting up mix proportion and thickness of ECC.