• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.424-429
• /
• 2003

Hot gas path components, which are made of nickel based superalloys, are subject to periodic replacement due to degradation of thermomechanical properties that might bring catastrophic failure during normal operation of gas turbine units. In order to rejuvenate the metallurgical condition of the serviced components, heat treating techniques such as solution annealing and aging heat treatments have widely been employed. However, the effectiveness of those typical heat treatments is not apparent enough in terms of quantitative grounds. On the other hand the demand of the rejuvenation heat treatment and hot isostatic pressing (HIP) have constantly been raised by the end users. Therefore it is necessary to verify how the typical heat treating techniques affect to the aged and degraded material. As the result of experimental work in this study, GTD-111 and GTD-222 Ni-based superalloys were collected and analyzed quantitatively through microscopic observation, microhardness evaluation and creep test.

• 열처리공학회지
• /
• 제18권4호
• /
• pp.223-228
• /
• 2005

Tube hydroforming provides a number of advantages over conventional stamping process, including fewer secondary operation, weight reduction, assembly simplification, adaptability to forming of complex structural components and improved structural strength and stiffness. It can produce wide range of products such as subframe, engine cradle, and exhaust manifold. In this study, the effect of the heat treatment conditions such as post seam annealing (PSA) and bright annealing (BA) on the ovality and hydro-formability of steel tubes has been investigated. Hydroformabilities have been estimated by the bulging heights obtained at various processing parameters such as internal pressure, axial feeding and heat treatment conditions. The ovality and forming height are strongly influenced by material properties after heat treatments.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권10호
• /
• pp.1513-1520
• /
• 2014

The present aim was to investigate the effects of traditional Chinese medicine prescriptions (TCM) on body temperature, blood physiological parameters, nutrient apparent digestibility and growth performance of beef cattle under heat stress conditions. Twenty-seven beef cattle were randomly divided into three groups as following; i) high temperature control (HTC), ii) traditional Chinese medicine prescriptions I+high temperature (TCM I) and iii) traditional Chinese medicine prescriptions II+high temperature (TCM II) (n = 9 per group). The results showed that the mean body temperature declined in TCM II treatment (p<0.05). Serum $T_3$ and $T_4$ levels with TCM I and TCM II treatments elevated (p<0.05), and serum cortisol levels of TCM I treatments decreased (p<0.05), compared with the HTC group. Total protein, albumin, globulin in TCM II treatments elevated and blood urea nitrogen levels of both TCM treatments increased, but glucose levels of both TCM treatments decreased, compared with the HTC group (p<0.05). The apparent digestibility of organic matter and crude protein with TCM I treatment increased, and the apparent digestibility of acid detergent fiber elevated in both TCM treatments (p<0.05). Average daily feed intake was not different among three groups, however average daily gain increased and the feed:gain ratio decreased with both TCM treatments, compared with the HTC group (p<0.05). The present results suggest that dietary supplementation with TCM I or TCM II improves growth performance of heat stressed beef cattle by relieving heat stress responses and increasing nutrient apparent digestibility.

• 열처리공학회지
• /
• 제16권6호
• /
• pp.349-355
• /
• 2003

• 한국식품과학회지
• /
• 제18권6호
• /
• pp.437-442
• /
• 1986

밤전분의 수분을 14,18,21 및 24%로 조절하고 $100^{\circ}C$에서 16시간 가열 처리한 다음 이화학적 성질을 생전분과 비교하였다. 수분-열처리에 따라 결정도, 팽화력 및 용해도는 다같이 감소하였다. 전분현탁액(0.1%)의 광투과도는 $58^{\circ}C$부터 급격히 증가하였으나 수분 (18%) 열처리한 전분은 $63^{\circ}C$부터 광투과도가 증가하였으며 그 증가율은 비처리 전분에 비하여 낮았다. 전분의 호화양상은 수분-열처리에 의하여 초기호화온도는 증가하였고 수분 21%이상 처리한 전분은 최고 점도를 보이지 않았다. 전분의 호화에 필요한 최저수분함량은 생전분이 45%, 수분(18%)-열처리한 전분이 40%이었으며. 호화에 필요한 최저 온도는 모두 $65^{\circ}C$이었다.

• 열처리공학회지
• /
• 제13권5호
• /
• pp.369-372
• /
• 2000

• 열처리공학회지
• /
• 제11권1호
• /
• pp.27-34
• /
• 1998

Effects of different heat treatments on microstructure and damping capacity of Cu-55%Mn alloy were investigated to find an optimum heat treatment condition for a maximum damping capacity. The alloy showed the high level of damping capacity in case of the aging at 375 and $400^{\circ}C$. This is ascribed to the FCC${\rightarrow}$FCT martensitic transformation and microstructural changes from mottled to tweed band type. The damping capacity had a maximum value of 0.33 in logarithmic decrement when the alloy was aged at $375^{\circ}C$ for 14 hours followed by 20 times of thermal cycling between room temperature and $250^{\circ}C$. The refinement of tweed structure by thermal cycling is thought to be responsible for the highest damping capacity.

• 열처리공학회지
• /
• 제17권3호
• /
• pp.146-150
• /
• 2004

Because of the social needs for energy saving and the rigid environmental regulation, the development of light materials and new economical manufacturing technologies have been actively investigated. Recently, the hydroforming of high strength aluminum tube has attracted great interest due to its good strength-to-weight ratio, which could play an important role in lightweighting of automobile. However, the limited formability of high strength aluminum alloys is considered to hinder the active application of the hydroforming process. In this paper, the hydroformability of aluminum tubes with different heat treatments was investigated as the basic research of the hydroforming process for the high strength aluminum tubes.

• 한국재료학회지
• /
• 제24권6호
• /
• pp.285-292
• /
• 2014

Commercial activated-carbon used as the electrode material of an electric double-layer capacitor (EDLC) was posttreated with various acids and alkalis to increase its capacitance. The carbon samples prepared were then heat-treated in order to control the amount of acidic functional groups formed by the acid treatments. Coin-type EDLC cells with two symmetric carbon electrodes were assembled using the prepared carbon materials and an organic electrolyte. The electrochemical performance of the EDLC was measured by galvanostatic charge-discharge, cyclic voltammetry, and electrochemical impedance spectroscopy. Among the various activated carbons, the carbon electrodes (CSsb800) prepared by the treatments of coconutshell-based carbon activated with NaOH and $H_3BO_5$, and then heat treated at $800^{\circ}C$ under a flow of nitrogen gas, showed relatively good electrochemical performance. Although the specific-surface-area of the carbon-electrode material ($1,096m^2/g$) was less than that of pristine activated-carbon ($1,122m^2/g$), the meso-pore volume increased after the combined chemical and heat treatments. The specific capacitance of the EDLC increased from 59.6 to 74.8 F/g (26%) after those post treatments. The equivalent series resistance of EDLC using CSsb800 as electrode was much lower than that of EDLC using pristine activated carbon. Therefore, CSsb800 exhibited superior electrochemical performance at high scan rates due to its low internal resistance.

• 한국식품저장유통학회지
• /
• 제21권6호
• /
• pp.776-783
• /
• 2014

절단 배추를 예열처리하고 LDPE 필름 포장하여 단기저장하면서 이화학적인 품질특성과 갈변도를 조사하였다. $40^{\circ}C$에서 1, 2, 4, 8시간동안 예열처리한 후 SDS-PAGE 법으로 단백질 밴드를 조사한 결과, 예열처리구에서 대조구에 비하여 HSP 밴드로 추정되는 60, 39, 33, 12 kDa 밴드가 강하게 나타났으며, 이 중 4시간 예열처리구(HS 4)가 가장 발현율이 높았으며 중량감소율도 적었다. 8주 동안 저장 중 예열처리한 절단배추의 중량감소율 및 적정산도는 거의 변화가 없었으며, 가용성 고형분 함량은 4시간 예열처리구가 가장 적게 감소하였다. 갈변도는 HS 4가 가장 적었다(Con>HS 1>HS 8>HS 2>HS 4, p<0.05). PPO활성은 저장 중 모든 구에서 지속적으로 증가하였으며, HS 4가 가장 낮았고 총페놀성 화합물은 모든 처리구에서 유사하게 감소하였다. 예열처리한 절단배추에서 HSP 밴드의 발현을 확인하였으며, 4시간 예열처리구의 단기 저장 효과가 가장 좋았다.