• Journal of Forest and Environmental Science
• /
• 제29권2호
• /
• pp.109-115
• /
• 2013

Fast-grown wood generally contains a high proportion of juvenile wood that results in inferior dimensional stability and durability against biological deteriorations. In the present research, the Acacia mangium wood from plantation forests in Vietnam was treated with high temperature in air. The effects of heat treatment on physical properties of Acacia mangium wood, including mass loss (ML), water absorption (WA), water-repellent effectiveness (WRE) and anti-swelling efficiency (ASE) were examined. The results showed that the dimensional stability and the water-repellent effectiveness are increased by about 15-46% and 8-18%, respectively. However, the mass and dimension of wood are decreased. The results also indicated that both treatment temperature and treatment duration significantly affect the wood properties of Acacia mangium. It is thus concluded that heat treatment demonstrates an interesting potential to improve the wood quality of Acacia mangium for solid timber products. This technology provides an environmentally safe method of protecting sustainable common woods to give a new generation of value-added biomaterials with increased stability without the use of toxic chemicals.

• 한국가금학회지
• /
• 제17권2호
• /
• pp.127-133
• /
• 1990

가열온도와 시간, pH 및 NaCl 농도가 난백겔의 열안정성에 미치는 영향을 검토하기 위하여 가열처리 후 난백겔의 특성을 검토하였으며 그 결과는 다음과 같다. 난백을 90~$170^{\circ}C$까지 온도와 시간별 가열처리 한 결과. 110~$130^{\circ}C$ 영역에서 경도가 떨어졌으나 온도가 높아짐에 따라서 급격히 증가하였다. 응집성의 경우는 12$0^{\circ}C$까지 감소한 후 $130^{\circ}C$에서 급격히 증가하였다. 명도는 온도가 높아질수록 시간이 길어질수록 낮아졌으며 황색도는 높아졌다. 난백의 경도는 pH 7을 중심으로 산성영역에서는 고온처리가 높았으며 알카리영역에서 밝았다. 고온처리의 경우가 저온처리에 비해 산성영역에서는 보다 밝았으며 알카리 영역에서는 보다 어두웠다. 염의 첨가에 의해 난백의 경도는 저온처리 시에는 큰 변화가 없었으나 고온처리시 다소 증가하였고 응고집성은 저온처리시 서서히 증가하였으며 고온처리시 0.5%까지 급격히 증가하였다. 색택은 고온고리시 명도가 증가하였고 황색도는 감소하였으며 농도별 차이는 크지 않았다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.238-243
• /
• 2011

This study compared Kd, loss factor and thickness of floor impact isolator by loading/unloading heat treatment with results by continuous loading treatment and checked problem and improvement method of heat treatment condition for the long-term stability evaluation of the floor impact isolation. As the results, it is required the change of heat treatment condition unloading now to loading as actual weigh on the floor impact isolator.

• 대한임베디드공학회논문지
• /
• 제19권3호
• /
• pp.123-130
• /
• 2024

This paper proposes an EMPC (Explicit Model Predictive Controller) for temperature tracking control based on heat load prediction by an ESO (Extended State Observer) for a variable cooling circulation system with multiple indoor units connected to one outdoor unit. In this system, heat transfer and heat loss relative to the input temperature are modeled using system dynamics. Using this model, we design an EMPC based on an ESO that is robust to temperature changes and depends on airflow. To determine the stability of both the controller and the observer, asymptotic stability is verified through Lyapunov stability analysis. Finally, to validate the performance of the proposed controller, simulations are conducted under three scenarios with varying airflow, set temperature, and heat load.

• 한국가구학회지
• /
• 제18권2호
• /
• pp.143-146
• /
• 2007

This study was carried out to assess the dimensional stability of wood material treated by plastic processing for bentwood and compression wood. The evaluation method was different between two wood materials, but the treatments for them were very similar to each other. One of the main methods is heat treatment with sufficient water vapor. In bentwood, the used species were painted maple (Acer mono), bitter wood (Picrasma quassioides) and birch (Betula schmidtii). Steaming was the worst treatment method for dimensional stabilization of bentwood. The best results could be attained with PEG treatment for dimensional stabilization of bentwood. Dimensional stability of bitter wood was found to be conspicuous. However the steaming treatment at lower temperatures, i.e., about $130^{\circ}C$ was not suitable for dimensional stability of bentwood. In compression wood, the used specimen was Italian poplar wood (Populus euramericana). Two heat compressive pressing conditions, an open-press system and an air-tighten closed-press system, were used. The recovery rate was measured after boiling and/or absorbing in water to estimate the dimensional stability of heat compressed wood. The best dimensional stability of compressed wood in the air-tighten closed-press system was found to be better at $200^{\circ}C$ than $180^{\circ}C$. The best compression rate for dimensional stability was 73 percent.

• 한국식품영양과학회지
• /
• 제43권10호
• /
• pp.1549-1554
• /
• 2014

메밀 성분 중 루틴의 추출 효율을 높이기 위해 메밀을 발아한 후 루틴 및 polyphenol 추출 효율이 높은 추출방법을 선택하였다. 메밀의 발아는 흙 재배가 효율적이었으며, 8일 후에는 polyphenol 함량이 10.66 mg/g으로 메밀 종자에 함유되어 있던 polyphenol 함량의 10배 이상 높은 양을 얻을 수 있었다. 발아 메밀에서 추출된 루틴을 포함한 polyphenol 성분은 에멀젼을 제조하여 열에 대한 안정성을 높이는 데 효율이 있는지를 확인하였다. 에멀젼은 homo mixer만을 통과시키는 것보다 유압식 균질기를 통과시켰을 때 포접 효율이 높을 뿐만 아니라 열처리 온도에 대하여 열 안정성이 우수한 것을 알 수 있었다.

• 한국표면공학회지
• /
• 제43권2호
• /
• pp.57-63
• /
• 2010

In this study, thermal stability of the mechanical properties of Ni-P-B and Ni-P-Fe layers electroplated on Alloy 600 material was evaluated by measuring their microhardness, tensile strength, and elongation after heat treatment at $325^{\circ}C$ and $400^{\circ}C$. According to the results, there was no noticeable change in microhardness of the two electrodeposits before and after heat treatment at the temperatures for 30 days. In the case of a Ni-P-B electrodeposit, ultimate tensile strength (UTS) slightly increases with heat treatment time, while its elongation decreases, showing good thermal stability in the mechanical properties at high temperature. On the other hand, UTS and elongation of Ni-P-Fe decrease with heat treatment time, which is very unusual observation. This result was attributed to the bad microstructure of Ni-P-Fe having many defects in the deposit formed early stage of an electroplating process and their redistribution to link to become large ones during heat treatment.

• 열처리공학회지
• /
• 제37권1호
• /
• pp.1-8
• /
• 2024

Phase stability of tetragonal crystals in yttria-stabilized zirconia ceramics is dependent on the content of yttria and the heat-treatment condition, related with mechanical properties. In this study, we fabricated the 1.5 mol% yttria-stabilized zirconia (1.5Y-YSZ) ceramics by cold isostatic pressing (CIP) and post-sintering at temperature range of 1200 to 1350℃ for 2 hours and investigated the sintered properties and microstructural evolution. Sintered and microstructural parameters, i.e, apparent density, grain size and phase composition of 1.5Y-YSZ ceramics were mainly dependent on the sintering temperature. Maximum sintered density of 99.4 % and average grain size of 200-300 nm could be obtained from the heat-treatment condition above sintering temperature at 1300℃ for 2 hours, possessing the superior mechanical hardness with 1200 Hv. However, phase stability of tetragonal grains in 1.5 YSZ ceramics is very low, inducing the phase transformation to monoclinic crystals on specimen surface during cooling after heat-treatment.

• 한국가구학회지
• /
• 제20권6호
• /
• pp.560-565
• /
• 2009

It is known that heat treatment decreases the hygroscopicity of wood. Thus heat-treated wood is good for outdoor construction due to its improved dimensional stability. This study is to investigate the hygroscopicity and discoloration of spruce and birch boards heat-treated above $190^{\circ}C$. The equilibrium moisture contents (EMCs) at all relative humidities decreased with the increase of heat treatment temperature and/or time for both spruce and birch. It was revealed that heat-treatment temperature affected more on the hygroscopicity thaan heat-treatment time. The average basic densities decreased for the spruce specimens, but increased for the birch specimens with an increase of the treatment time and/or temperature. The same heat treatment condition (190-8) made the birch specimens darker than the spruce specimens.

• 동력기계공학회지
• /
• 제20권4호
• /
• pp.12-18
• /
• 2016

Typical boiler system consists of combustion chamber and heat exchanger in one housing, therefore the size of boiler system is large and the heat exchanging efficiency becomes low. At these boiler systems, because the combustible mixture fires as free flame in the combustion chamber, consequently the combusted hot gas heats the heat exchanger only as conductive and convective heat transfer. The present Porous Ceramic Burner concept is that combustion process is occurred at the gaps of the porous ceramic materials, and the heat exchanger is placed in the same porous materials. Therefore we can reduce the boiler size, and we can also use radiative heat transfer from ceramic material with conductive and convective heat transfer from combusted gas throwing the porous materials. The purpose of this study is to search the flame stability ranges at different fuel flow rate and excess air ratio burning in the $Al_2O_3$ ceramic balls. We found out the stable excess air ratio range on given combustion intensity. And we can get clean porous ceramic combustion results compared with free flame.