• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.942-943
• /
• 2006

To meet the demands for use in extremely abrasive and corrosive environments, a new material was developed. The VeKo25Cr distinguishes itself through specifically selected amounts of carbon and carbide forming elements such as Cr, Mo, V, W and Nb. The alloy is based on a Fe matrix. The strength after heat treatment and the wear and corrosion properties are compared to those of other materials. VeKo25Cr can be combined with easy-to-process materials such that the difficult handling is minimized to those places on the piece most subjected to operational wear.

• 한국염색가공학회지
• /
• 제16권5호
• /
• pp.35-41
• /
• 2004

Poly(ethylene terephthalate), polyimide(Kapton), and polypropylene surfaces were modified with argon low temperature plasma by RF glow discharge at 240m Torr, 40W to investigate the surface morphological changes due to the plasma treatment using atomic force microscopy(AFM). Analysis of the AFM images and Ra(average roughness) revealed that the plasma treatment resulted in significant ablation on the surfaces. The morphological changes and surface roughness, however, were different depending on material characteristics such as heat stability, presence of amorphous region, swelling phenomenon, and molecular structure of repeating unit. It was assumed that polypropylene due to its tertiary hydrogen was ablated easily compared to poly(ethylene terephthalate), and that polyimide was more resistant to the ablation than PET due to rigid skeleton of imide and stable phenyl ring structure.

• Journal of Welding and Joining
• /
• 제1권2호
• /
• pp.61-68
• /
• 1983

Austenitic stainless steel has been investigated widely for creep strength of heat resistant material and effects of grain sizes due to various solution treatment time under constant temperature. It was studied that effects of grain sizes subject to solution treatment temperature 1100.deg. C, 1125.deg. C, 1175.deg. C, 1250.deg C, and 1300.deg. C respectively on the creep strength, fracture behaviour and fractography of SUS 316 stainless steel. The experimental results obtained were as follows. 1. The optimum grain size for the maximum creep strength did not vary with creep testing temperatures and stress levels. 2. Among various grain sizes due to different solution treatment temperature, the optimum grain size for the creep strength was found 0.044mm. Also the size showed the minimum initial strain regardless creep temperature. 3. Garofalo's equation of creep rupture life was applied well to SUS 316 stainless steel. 4. The fractography of optimum size was ductile intergranular fracture of dimple type and showed along with the increase of grain size intergranular fracture of w type.

• Corrosion Science and Technology
• /
• 제17권4호
• /
• pp.183-192
• /
• 2018

스테인리스강은 오스테니틱 스테인리스강, 페리틱 스테인리스강과 마르텐시틱 스테인리스강으로 대별할 수 있으며, 이 고도의 안전성이 요구되는 산업계에서 스테인리스강의 입계부식, 응력부식균열과 핏팅과 같은 국부적 부식이 발생하면 대형사고로 귀결될 수 있다. 스테인리스강의 입계부식 기구와 대책 그리고 입계부식측정 방법에 대한 기술 소개를 하여 산업현장에서 흔히 접하는 스테인리스강 예민화에 대한 길잡이가 되도록 하고, 이 분야를 전문적으로 연구하려는 연구자에게 예민화 전반을 이해하는데 활용되도록 하였다.

• 한국재료학회지
• /
• 제27권12호
• /
• pp.716-721
• /
• 2017

SiAlON-based ceramics are some of the most typical ceramic materials used as cutting tools for HRSA(Heat Resistant Super-Alloys). SiAlON can be fabricated using ceramic processing, such as mixing, granulation, compaction, and sintering. Spray drying is a widely-used method for producing a granular powder of controlled morphology and size with flowability. In this study, we report a systematic investigation aimed at optimizing spherical granule morphology by controlling spray-drying parameters such as gas flow and feed rate. Before spray drying, the viscosities of the raw material slurries were also optimized with the amount of dispersant added.

• Computers and Concrete
• /
• 제19권6호
• /
• pp.711-716
• /
• 2017

This paper presents a method using artificial neural networks (ANNs) to predict the residual moment capacity of thermally insulated reinforced concrete (RC) beams exposed to fire. The use of heat resistant insulation material protects concrete beams against the harmful effects of fire. If it is desired to calculate the residual moment capacity of the beams in this state, the determination of the moment capacity of thermally insulated beams exposed to fire involves several consecutive calculations, which is significantly easier when ANNs are used. Beam width, beam effective depth, fire duration, concrete compressive and steel tensile strength, steel area, thermal conductivity of insulation material can influence behavior of RC beams exposed to high temperatures. In this study, a finite difference method was used to calculate the temperature distribution in a cross section of the beam, and temperature distribution, reduction mechanical properties of concrete and reinforcing steel and moment capacity were calculated using existing relations in literature. Data was generated for 336 beams with different beam width ($b_w$), beam account height (h), fire duration (t), mechanical properties of concrete ($f_{cd}$) and reinforcing steel ($f_{yd}$), steel area ($A_s$), insulation material thermal conductivity (kinsulation). Five input parameters ($b_w$, h, $f_{cd}$, $f_{yd}$, $A_s$ and $k_{insulation}$) were used in the ANN to estimate the moment capacity ($M_r$). The trained model allowed the investigation of the effects on the moment capacity of the insulation material and the results indicated that the use of insulation materials with the smallest value of the thermal conductivities used in calculations is effective in protecting the RC beam against fire.

• 한국화재소방학회논문지
• /
• 제28권5호
• /
• pp.52-57
• /
• 2014

구조용 강재는 고온 시 물질 내부의 구성 물질의 결합력 약화로 인하여 내력과 변형이 추가적으로 발생됨으로써, 구조적 성능이 저하되고, 국부 및 연속적 붕괴로 이어질 수 있다. 따라서 강재로 구성된 구조부재는 화재 시 열영향부를 최소화하기 위한 수단이 강구되는 내화설계가 요구된다. 건축용 내화강재(FR 490)는 용접 구조용 강재(SM 490)와 상온시 특성은 동일하나, 고온 시의 내력유지 성능이 우수한 강종으로써 이로 구성된 보부재의 고온 시 내력 평가 자료는 거의 없다. 따라서 본 연구에서는 FR 490강재로 구성된 보부재의 고온 시 거동을 고온 시 재료 특성과 이론적 방법을 통하여 해석적으로 평가하고, 이를 SM 490강재보와 비교함으로써 내화성능을 확인하고자 하였으며, 그 결과 FR 490강재보의 경우 SM 490강재보에 비해서 고온 시 내력유지 성능이 우수하였다.

• Journal of Welding and Joining
• /
• 제26권5호
• /
• pp.49-59
• /
• 2008

Hastelloy C-276, corrosion resistant alloy at high temperature, is used in chemical plant and power generation industry. In this study, process parameter of laser welding for welding property in Hastelloy C-276 using a continuous wave Nd:YAG laser was studied. As the result of experiment, laser welding did not show segregation or crack at heat affected zone compared to conventional GTWA welding. The melting zone showed cell dendritic structure along with welding line. In addition, planer front solidification is occurred from welding structure, and it was progressed to cellular solidification. Optimal process parameter for butt welding was 1.2kW and 2.0 m/min for laser power and welding speed, respectively. While heat input, output density, tensile stress, and longitudinal strain was $441.98{\times}103$ J/cm2, $29.553{\times}103$ W/cm2, 768 MPa, and 0.689, respectively. Lap welding of the same material showed greater discrepancy in tensile property during 1 line and 2 line welding. For 1 line welding, tensile stress was about 320 MPa, and 2 line showed slightly larger tensile stress. However, strain was decreased by 20%. From this result, lap welding of the same material, Hastelloy C-276, with 2 line welding is considered to be more effective process than 1 line welding with consideration of mechanical property.

• Elastomers and Composites
• /
• 제38권1호
• /
• pp.72-80
• /
• 2003

자동차 Oil cooler용 호스를 구성하는 고무재료의 내열 및 난연성을 향상시키기 위하여 인산 에스테르계 화합물을 내열 및 난연제로 하여 제조한 염소화 폴리에틸렌(CPE) 배합고무의 가황 특성, 물리적 성질, 내열성, 난연성 및 변량효과를 조사하였다. 호스용 고무재료는 기존의 ethyleneacrylate rubber(EAR)보다 화학적 내식성과 내한성이 우수하면서도 가격이 저렴한 CPE 고무재료를 사용하였으며, 난연제는 비할로겐 축합 인산 에스테르계인 N,N'-bis-(diphenylphosphoro) diaminohexane(BDPDH)를 합성하여 CPE 고무재료와 $0{\sim}30 phr$ 범위에서 혼련하였다. 배합고무시편의 경도, 인장강도, 신율, 인장응력 및 열적 특성을 측정한 결과, CPE 배합고무의 유동성, 난연성, 내열성이 향상되었음을 확인하였으며, 고무재료 규격을 초과하지 않는 범위 내에서 최대의 내열 및 난연 효과를 주는 BDPDH의 배합량은 20 phr로 나타났다.

• 한국환경보건학회지
• /
• 제27권1호
• /
• pp.75-82
• /
• 2001

Microorganisms can attach firmly to food contact surface material and the resitance of adherent bacteria differ markedly from planktonic cells. Therefore, adherent cells are a potential contamination problem to the food preparation because of their high resistance. to sanitation and heat treatment. This study was carried out in order to investigate growth and decontamination of Listeria monocytogenes attached to stainless steel, glass and plastic. Listeria monocytogenes cells could attach to all types of surface at three temperatures after contact times for 24 hrs. The numbers of adherent cells were greater at higher temperatures, but not increased with incubation time. When recovery of adherent cells was investigated, after 24 grs, the numbers of adherent cells were about 10$^{7}$ , 10$^{10}$ , 11$^{11}$ at 4$^{\circ}C$, $25^{\circ}C$, 3$0^{\circ}C$ repectively. Planctonic cells decreased by 2 log cycles after exposure to the domestic sanitizer. Adherent cells showed high resistance to domestic sanitizers and that was dependent upon surface materials studied, being greatest on plastic followed by stainless steel and glass. Adherent cells were more resistant to heat treatment than planktonic cells. When adherent cells were exposed to the temperature of 5$0^{\circ}C$, 55$^{\circ}C$, 57.5$^{\circ}C$ for 10 min, their populations did not decrease significantly. When the temprature increased to 6$0^{\circ}C$, cells attached to all types of surfaces were completely inactivated for 10 min.