DOI QR코드

DOI QR Code

Predicting residual moment capacity of thermally insulated RC beams exposed to fire using artificial neural networks

  • Erdem, Hakan (Department of Civil Engineering, Nigde University)
  • 투고 : 2016.03.12
  • 심사 : 2017.03.04
  • 발행 : 2017.06.25

초록

This paper presents a method using artificial neural networks (ANNs) to predict the residual moment capacity of thermally insulated reinforced concrete (RC) beams exposed to fire. The use of heat resistant insulation material protects concrete beams against the harmful effects of fire. If it is desired to calculate the residual moment capacity of the beams in this state, the determination of the moment capacity of thermally insulated beams exposed to fire involves several consecutive calculations, which is significantly easier when ANNs are used. Beam width, beam effective depth, fire duration, concrete compressive and steel tensile strength, steel area, thermal conductivity of insulation material can influence behavior of RC beams exposed to high temperatures. In this study, a finite difference method was used to calculate the temperature distribution in a cross section of the beam, and temperature distribution, reduction mechanical properties of concrete and reinforcing steel and moment capacity were calculated using existing relations in literature. Data was generated for 336 beams with different beam width ($b_w$), beam account height (h), fire duration (t), mechanical properties of concrete ($f_{cd}$) and reinforcing steel ($f_{yd}$), steel area ($A_s$), insulation material thermal conductivity (kinsulation). Five input parameters ($b_w$, h, $f_{cd}$, $f_{yd}$, $A_s$ and $k_{insulation}$) were used in the ANN to estimate the moment capacity ($M_r$). The trained model allowed the investigation of the effects on the moment capacity of the insulation material and the results indicated that the use of insulation materials with the smallest value of the thermal conductivities used in calculations is effective in protecting the RC beam against fire.

키워드

참고문헌

  1. ACI216 (1994), Guide for Determining the Fire Endurance of Concrete Elements, ACI Committee 216.
  2. Bilgehan, M. and Kurtoglu, A.E. (2015), "ANFIS-based prediction of moment capacity of reinforced concrete slabs exposed to fire", Neur. Comput. Appl., 1-13.
  3. Choi, E.G., Shin, Y.S. and Kim, H.S. (2013), "Structural damage evaluation of reinforced concrete beams exposed to high temperatures", J. Fire Protect. Eng., 23(2), 135-151. https://doi.org/10.1177/1042391512474666
  4. Cengel, Y.H. (1998), Heat Transfer: A Practical Approach, McGraw-Hill.
  5. Eamon, C.D. and Jensen, E.A. (2013), "Reliability analysis of RC beams exposed to fire", Res. Publ. Civil Environ. Eng., 1-15.
  6. Erdem, H. (2009), "Effect of isolation materials on nominal moment capacity of RC beams exposed to fire", Proceedings of the Symposium on Engineering and Architectural Sciences of Balkan, Caucasus and Turkic Republics, Suleyman Demirel University, Isparta, Turkey, October.
  7. Erdem, H. (2009), "Nominal moment capacity of box RC beams exposed to fire", Turk. J. Eng. Environ. Sci., 33(1), 31-44.
  8. Erdem, H. (2010) "Effects of insulation materials on temperature distribution inside reinforced concrete beam exposed to fire", Proceedings of the 9th International Congress on Advances in Civil Engineering, Trabzon, Turkey, September.
  9. Erdem, H. (2010), "Bending capacity of T shaped RC beams subjected to high temperatures", Tech. J. Turk. Chamb. Civil Eng., 5023-5036.
  10. Erdem, H. (2015), "Predicting the moment capacity of RC beams exposed to fire using ANNs", Constr. Build. Mater., 101, 30-38. https://doi.org/10.1016/j.conbuildmat.2015.10.049
  11. Eurocode 2 (1995), Design of Concrete Structures ENV 1992 Part 1-2: General Rules Structural Fire Design, European Committee for Standardization, Brussels, Belgium.
  12. Firmo, J.P., Arruda, M.R.T., Correia, J.R. and Rosa, I.C. (2017), "Three-dimensional finite element modeling of the fire behavior of insulated RC beams strengthened with EBR and NSM CFRP strips", Compos. Struct., In press.
  13. Hsu, J.H. and Lin, C.S. (2006), "Residual bearing capabilities of fire-exposed reinforced concrete beams", J. Appl. Sci. Eng., 4(2), 151-163.
  14. Incropera, F.P. and Dewitt, D.P. (1996), Fundamentals of Heat and Mass Transfer, John Wiley & Sons.
  15. ISO-834 (1975), Fire Resistance Tests-Elements of Building Construction, International Standard Organization.
  16. Kadhum, M.M. (2014), "Fire resistance of reinforced concrete rigid beams", J. Civil Eng. Constr. Technol., 4(4).
  17. Kahraman, S., Altun, H., Tezekeci, B.S. and Fener, M. (2006), "Sawability prediction of carbonate rocks from shear stregth parameters using artificial neural networks", J. Rock Mech. Min. Sci., 43(1), 157-164. https://doi.org/10.1016/j.ijrmms.2005.04.007
  18. Kodur, V.K.R. and Agrawal, A. (2016), "An approach for evaluating residual capacity of reinforced concrete beams exposed to fire", Eng. Struct., 110(1), 293-306. https://doi.org/10.1016/j.engstruct.2015.11.047
  19. Kodur, V.K.R. and Dwaikat, M.B. (2011), "Design equation for predicting fire resistance of reinforcedconcrete beams", Eng. Struct., 33(2), 602-614. https://doi.org/10.1016/j.engstruct.2010.11.019
  20. Ozbolt, J., Bosnjak, J., Periskic, G. and Sharma, A. (2014), "3D numerical analysis of RC beams exposed to elevated temperature", Eng. Struct., 58, 166-174. https://doi.org/10.1016/j.engstruct.2012.11.030

피인용 문헌

  1. Numerical analysis of simply supported one-way reinforced concrete slabs under fire condition vol.27, pp.4, 2017, https://doi.org/10.12989/cac.2021.27.4.355