• 설비공학논문집
• /
• 제25권5호
• /
• pp.289-296
• /
• 2013

A near infrared (NIR) heating system has advantages over the conventional convection-based systems, in terms of heating uniformity and energy efficiency. When it is over-heated during its operation, the radiation lamp gets blackened, and the life of the radiation module becomes severely limited. The heat transfer system in the module is based on a high operating-temperature, and the radiation makes it difficult to analyze in detail the reliability issue, with an experimental approach alone. We developed a numerical heat-transfer model of the NIR heating system. We applied a ray-tracing method on the radiative heat transport, and a finite volume method on the conductive and convective systems, respectively. The cooling performance of the system is presented, based on the energy and flow distributions in the module. The factors that directly affect the module life are analyzed, such as the surface temperatures of the lamp glass and the reflector, and design improvements are discussed.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권4호
• /
• pp.331-337
• /
• 2016

Purpose: The purpose of this study is the analysis of the failure mechanisms effect of circuit design characteristics of the ballast for LED Lamp Methods: Recently, electronic circuit of ballasts for LED lamp are being occurred on various failure mechanisms (whiskers, ion migration, heat dissipation problem, switching element damage) because electronic ballast circuit design characteristics are becoming more and more diverse. Results: we analysis failure mechanisms that occurs in accordance with the circuit design characteristics The ballast for LED lamp were divided into three different types (Type A, Type B, Type C) considering circuit design characteristics (thermal design, PCB patten spacing, element material) and it was experimented in the acceleration test conditions ($85^{\circ}C$, 85% R.H). Conclusion: We confirmed that failure mechanism of the ballast for LED Lamp had occurred differently in accordance with the circuit design characteristics.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.730-733
• /
• 2010

본 논문은 녹색조명설비의 구현으로 얇은 패널구조의 LED 조명등을 제작하여 가로등조명, 수중배양 양식조명, 집어등 및 수중탐사의 특수조명 활용성을 확인하였다. 제작된 패널구조의 녹색조명등은 상기한 용도의 조명등으로서 매우 탁월함이 확인되었다. 그 중 집어등의 경우는, 작은 치어 등의 미세생물체와 어류의 조광이동성 및 군집 활동성 증진에 효과적이었으며, 수중배양 양식 조명에서는 녹색 조류, 해초, 수초 및 각종 유기체의 광합성 성장에 유용하였고, 특히 수중조명장치로서의 방수성 및 방열작용의 탁월성이 확인되었다.

• Design & Manufacturing
• /
• 제15권4호
• /
• pp.32-36
• /
• 2021

In this study, the cause of the decrease in transmittance of the outer lens among the causes of the decrease in the amount of light in the automobile headlamp was identified, and the improvement method was selected to determine the effect. The causes of defects that lower the transmittance of the outer lens are divided into a moisture problem and a haze problem. The moisture problem is caused by the temperature difference between the inside and the outside of the head lamp, and the haze problem occurs when the heat inside the head lamp evaporates the haze component contained in the plastic material and attaches it to the outer lens. In order to improve the haze problem that occurs in plastic raw materials, the structures of the bulb light source type headlamp and the LED chip light source type headlamp were analyzed. Among them, the housing material of the LED chip light source type headlamp, which is structurally prone to haze gas, was selected as the test target. In the mass-production injection process of the housing, the drying process was selected as a method to minimize haze gas without adding a separate production process. After extracting a sample every drying time at a constant drying temperature, the sample was put into a haze tester and the residual amount of haze gas was measured. As a result, it was confirmed that the residual amount of Haze gas in the material decreased as the drying time increased.

• 수산해양기술연구
• /
• 제47권2호
• /
• pp.79-87
• /
• 2011

A fishing lamp is fishing gear to gather fish in the night. But the cost of oil which is used to a light fishing lamp, goes significantly up to almost one hundred million won for 50 tonnage vessels and forty million won in case of vessels less than 10 tonnages. This cost has almost taken 30.40% of total fishing costs. As oil price increases, the business condition of the fishery gets worse and worse. Therefore, it is very urgent to develop an economical fishing lamp, to solve the problem of fishery's business difficulty. This research aims at developing a fishing lamp for squid jigging fishery and hairtail angling fishery using the LED, which has excellent efficiency and durability. One fishing lamp has about 160Watt capacity and five fishing lamps are installed one aluminium panel in which sea water flows to emit generated heat from LED to outside. Developed fishing lamp lights to an effective direction of jigging and angling operation. This fishing lamp can be controlled to light the direction of fish shoal because the aluminium panel can be controlled to up and down direction. The wave length of fishing lamp has white and blue color. White color light is to gather fish shoal of horizontal direction and blue color light is to gather fish shoal of vertical direction. After development of this fishing lamp, 60.110 units are established on the boat, and operated fishing. Consequently, in the case of squid jigging, spent energy was reduced to 39%, in the case of hairtail angling, 68% of spent energy was reduced. And the catch was more than another boat.

• 비파괴검사학회지
• /
• 제32권1호
• /
• pp.12-19
• /
• 2012

본 논문에서는 적외선 열화상 기법을 원전 배관에 적용하여 감육결함을 검사하기 위한 시험 조건을 파악하기 위해서, 인공 결함이 가공된 배관 시편과 평판 시편을 이용하여 적외선 열화상 시험을 수행하였다. 시험에는 할로겐램프를 사용하여 시편을 가열하였으며, 램프의 출력과 시편과 램프의 거리를 변수로 실험을 수행하였다. 시험 결과 시편과 램프의 거리가 1~2 m 이고 램프의 출력이 정격출력의 60 % 이상일 때, 적외선 열화상 기법은 1회 촬영으로 최소한 500 mm 범위 내에 존재하는 원주방향 폭이 $2{\Theta}=90^{\circ}$이고 깊이와 길이가 각각 d/t=0.5와 $L/D_o=0.25$인 배관내 인공 감육 결함들을 검출하였다. 평판 시편과 배관 시편에서 시편과 램프의 거리에 관계없이 램프 출력이 높을수록 결함에 대한 이미지가 선명하였다. 평판 시편과 배관 시편에서 적외선 열화상 방법의 결함 검출 능력은 유사하지만, 최적의 시험 조건은 시편에 따라 다르게 나타났다.

• 한국콘텐츠학회논문지
• /
• 제21권6호
• /
• pp.44-50
• /
• 2021

본 논문은 최적의 모니터 효율성을 설계하기 위해 CCFL과 LED 모니터의 광효율을 비교 분석한다. LCD 디스플레이 광원으로 많이 사용이 되고 있는 냉음극관 램프(Cold Cathode Fluorescent Lamp, CCFL)은 초기 구동 시 1,200[V]이상의 고전압과 점등 후 400 ~ 800[V]의 일정한 정상전압을 공급한다. 또한 3 ~ 6[mA]의 전류를 안정화 시킬 수 있는 전원회로가 필요하다. 고전압을 인가를 하게 되면 인버터에 무리가 많이 가고 냉음극관 램프에 많은 열이 발생을 하여 BLU(Back Light Unit)에 상당한 손상을 주어 그을리는 현상 발생, 이로 인하여 화면 출력 시 화면이 정상적인 색상을 출력을 못하고 노란색 출력, 화면 어두워짐을 확인할 수 있었다. 이러한 증상을 미연에 방지를 하고자 LCD디스플레이의 광원을 냉음극관 램프(Cold Cathode Fluorescent Lamp, CCFL)를 대신하여 발광다이오드(Light Emitting Diode, LED)을 이용하면 효율을 증대할 수 있다. 결론적으로 CCFL 방식보다 LED방식의 효율이 좋다는 것을 증명한다.

• 센서학회지
• /
• 제29권1호
• /
• pp.27-32
• /
• 2020

This study proposes a pixel-patterning method for organic light-emitting diodes (OLEDs) based on thermal transfer. An infrared lamp was introduced as a heat source, and glass type donor element, which absorbs infrared and generates heat and then transfers the organic layer to the substrate, was designed to selectively sublimate the organic material. A 200 nm-thick layer of molybdenum (Mo) was used as the lightto-heat conversion (LTHC) layer, and a 300 nm-thick layer of patterned silicon dioxide (SiO₂), featuring a low heat-transfer coefficient, was formed on top of the LTHC layer to selectively block heat transfer. To prevent the thermal oxidation and diffusion of the LTHC material, a 100 nm-thick layer of silicon nitride (SiN_x) was coated on the material. The fabricated donor glass exhibited appropriate temperature-increment property until 249 ℃, which is enough to evaporate the organic materials. The alpha-step thickness profiler and X-ray reflection (XRR) analysis revealed that the thickness of the transferred film decreased with increase in film density. In the patterning test, we achieved a 100 ㎛-long line and dot pattern with a high transfer accuracy and a mean deviation of ± 4.49 ㎛. By using the thermal-transfer process, we also fabricated a red phosphorescent device to confirm that the emissive layer was transferred well without the separation of the host and the dopant owing to a difference in their evaporation temperatures. Consequently, its efficiency suffered a minor decline owing to the oxidation of the material caused by the poor vacuum pressure of the process chamber; however, it exhibited an identical color property.

• Parasites, Hosts and Diseases
• /
• 제52권3호
• /
• pp.305-310
• /
• 2014

Ascidian soft tunic syndrome (AsSTS) caused by Azumiobodo hoyamushi (A. hoyamushi) is a serious aquaculture problem that results in mass mortality of ascidians. Accordingly, the early and accurate detection of A. hoyamushi would contribute substantially to disease management and prevention of transmission. Recently, the loop-mediated isothermal amplification (LAMP) method was adopted for clinical diagnosis of a range of infectious diseases. Here, the authors describe a rapid and efficient LAMP-based method targeting the 18S rDNA gene for detection of A. hoyamushi using ascidian DNA for the diagnosis of AsSTS. A. hoyamushi LAMP assay amplified the DNA of 0.01 parasites per reaction and detected A. hoyamushi in 10 ng of ascidian DNA. To validate A. hoyamushi 18S rDNA LAMP assays, AsSTS-suspected and non-diseased ascidians were examined by microscopy, PCR, and by using the LAMP assay. When PCR was used as a gold standard, the LAMP assay showed good agreement in terms of sensitivity, positive predictive value (PPV), and negative predictive value (NPV). In the present study, a LAMP assay based on directly heat-treated samples was found to be as efficient as DNA extraction using a commercial kit for detecting A. hoyamushi. Taken together, this study shows the devised A. hoyamushi LAMP assay could be used to diagnose AsSTS in a straightforward, sensitive, and specific manner, that it could be used for forecasting, surveillance, and quarantine of AsSTS.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2006년도 에너지.가스.기후변화학회 연합춘계학술대회 및 특별심포지움
• /
• pp.338-341
• /
• 2006