• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.695-700
• /
• 2009

Maintaining an IAQ with fresh in school building is very important because the good IAQ can be possible to improve the academic performance. Since school buildings are very dense and require a lot of fresh air, the need for ERV(Energy Recovery Ventilator) has become obvious. While opening a window does provide ventilation, the building's heat and humidity will then be lost in the winter and gained in the summer, both of which are undesirable for the indoor climate and for energy efficiency. ERV technology offers an optimal solution: fresh air, better climate control and energy efficiency. However, when the outdoor air condition is favorable to control the indoor environment such as spring and autum in Korea, heat exchange in ERV would rather increase the cooling load than diminish. Economizer cycle control which using the outdoor air in controlling the indoor thermal environment has many benefit in terms of energy saving and IAQ control. In this study, the ERV with economizer cycle control will be suggested. And then the system control characteristics and energy saving effect will be analyzed through the TRSNSYS Simulation.

• 생물환경조절학회지
• /
• 제11권3호
• /
• pp.101-107
• /
• 2002

본 연구에서는 온실의 온풍식 난방시스템 연통에 장착할 수 있는 폐열 회수기의 성능을 개선하기 위하여 각각 상이하게 설계된 3개의 열교환 장치에 대해 열회수 성능을 실험적으로 비교 분석하였다. A형 열회수시스템의 경우, 초기 투자비용과 현재의 농용 전력요금 하에서 대체로 1년을 전후하여 투자에 대한 보상이 충분한 것으로 판단된다. B형 및 C형 열회수시스템의 경우, 열 회수용 공기 흐름방향이 180$^{\circ}$굴절로 저항이 크게 발생되어 송풍팬의 전압 증가에 따른 유속 증가가 미미하며 동일한 열 교환면적에서는 송풍팬의 공기저항 증대로 열 회수 성능이 현저히 개선되지는 못했지만, 직선형보다 B형의 경우 약 5%. C형의 경우 약 13%정도 높은 열 회수효율을 보였다. 송풍팬의 용량은 A형에 사용된 용량인 25m$^3$/min전후가 적절할 것으로 판단되며, 적정 송풍팬 용량 하에서 열회수성능은 헤어핀형이 직선형보다 효과적인 것으로 나타났다. 다만, 헤어핀형은 물론 직선형에서도 열교환 파이프의 배치밀도, 파이프 길이 및 두께 등의 변화에 따른 최적화 연구가 수반되어야 할 것으로 판단된다.

• 한국항공우주학회지
• /
• 제34권10호
• /
• pp.92-98
• /
• 2006

2006년에 발사된 다목적실용위성은 자세제어 등에 필요한 추력과 모멘트를 발생하기 위해 NASA의 1lbf급 단일추진제 표준 추력기인 MRE-1을 사용하고 있다. 단일추진제 추력기는 추진제와 촉매와의 열분해 반응에 의해 추력을 발생시키는데 이때 발생되는 분해열은 상대적으로 온도가 낮은 주변 구조물 및 전자부품으로 과도한 복사열전달을 발생시키는 열원이 된다. 따라서 추력기와 타 부품 사이에 과도한 복사 열전달을 방지하기 위해서는 복사 열차폐막이 필요하다. 본 논문에서는 열차폐막의 설계/해석 및 제작 등 전반적인 개발 과정에 대해 설명하였다.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2738-2750
• /
• 1994

The Effects of radiative heat transfer on turbulent flow in a partitioned enclosure is studied numerically. The enclosure is partially divided by a thin, poorly conducting vertical divider projecting from the ceiling of the enclosure. The low Reynolds number $k-{\epsilon}$ model is adopted to calculate the turbulent flow field. The solutions to the radiative transfer equations are obtained by the discrete ordinates method(DOM). This method is based on control volume method and is compatible with the SIMPLER algorithm used to solve the momentum and energy equations. The effects of optical thickness and Planck number on the flow, temperature fields and heat transfer rates are investigated for a moderate Rayleigh number($=10^9$). The changes in buoyant flow fields and temperature distributions due to the variation of baffle length are also analyzed. From the predictions, radiant heat exchange between the baffle and the sidewalls strongly influences the temperature distribution in the baffle and its vicinity and total heat transfer increases as the optical thickness and the baffle length decrease. It is possible to neglect the radiative heat transfer effect when Planck number is over one.

• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.422-432
• /
• 2001

An analytical characterization is presented on the transient heat transfer by an oscillating flow through a porous slab. Based on a two-equation model, analytic solutions are obtained for both the fluid and solid temperature variations. Two parameters are identified as the Stanton number for the internal heat exchange and the ratio of the thermal capacities between the solid and fluid phases. The heat transfer characteristics are shown to be classified into four regimes according to the two parameters and physical interpretation is presented on the particular heat transfer processes within each regime. In addition, the condition for the local thermal equilibrium between the phases is examined and the relevant criterion is suggested.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.168.2-168.2
• /
• 2010

The growing market for geothermal heat pump system requires great consideration of quality control and assurance in design and construction. The borehole heat exchanger of GHP system should be sustainable, economical and ecological. Thermal Response Test (TRT) is a useful method for site investigation to obtain reliable data for a optimal system design from the technical and economical aspect. Intensive researches combined with exchange of experiences on an international level within the IEA ECES Annex 21 improved the technology. Major subjects on the interpretation of TRT are development of improved evaluation models, evaluation of the TRT with respect to geological layers and investigation of the influence of ground water. Current status of TRT in South Korea, as well as a new version of the Korean TRT standard test procedure was presented. TRT is mostly used for governmental supported projects with corresponds to more than 100 GCHP systems per year. More than 200 tests are applied, mostly on single U-tube heat exchangers (about 95%). Bentonite is the most common grouting to be used. KIGAM (Korea Institute of Geoscience & Mineral Resources) is also keeping a GIS geological and geothermal database. In the institute also laboratory measurements of rock properties are carried out. About 90% of the laboratory measurements of the rock heat conductivity shows higher values than the in-situ TRT.

• 대한기계학회논문집B
• /
• 제23권6호
• /
• pp.769-777
• /
• 1999

This paper presents models for the dynamic simulation of a regenerative gas turbine and describes dynamic behaviors of a small regenerative engine. A quasi-steady model is introduced where the inertia of the working fluid is assumed to be negligible compared with the mechanical inertia of the rotating shaft. Based on this quasi-steady model, the transient model for the heat exchanger is employed to simulate the unsteady heat exchange in the recuperator. The effect of the thermal inertia of the recuperator metal on transient behaviors is analyzed by comparing the predicted results of the transient and steady state heat exchanger models. For several load change modes such as sudden increase, decrease and periodic variation, engine dynamic characteristics are investigated by applying a fuel control logic for the constant shaft speed. It is found that the thermal inertia of the recuperator metal has a dominant effect on the whole engine dynamic behavior.

• 멤브레인
• /
• 제7권4호
• /
• pp.191-198
• /
• 1997

기체 투과도 및 기계적 강도가 높은 고분자 비대칭막을 상분리법으로 제조하기 위해 막 제조 메카니즘을 규명하는 연구를 수행하였다. 기본적인 연구가 많이 이루어진 폴리스티렌, 이에 비해 용매와의 관계가 덜 알려져 있는 폴리아미드이미드인 Torlon과 3,3'4,4'-benzophenontetracarboxylic diahmydride와 1,4-phenylene diarnine로 이루어진 폴리이미드를 여러 용매에 녹여 얻어진 캐스팅 용액으로부터 비대칭막을 제조하였다. 용매와 비용매와의 혼합열과 막 구조의 관계로부터, 막의 구조를 결정하는 데에는 용매와 비용매의 혼합열이 크게 영향을 미침을 알 수 있었다. 이 결과로부터 폴리술폰 막의 구조를 용매 첨가제를 사용하여 조절하였다. 캐스팅 고분자 용액이 비용매를 만날 때 용매와 비용매와의 혼합열이 두 물질의 교환 속도에 영향을 미쳐 결국에는 막의 구조에 영향을 미치는 데에 대한 이론적인 고찰도 아울러 수행하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권11호
• /
• pp.514-521
• /
• 2001

This paper uses the distributed heating thin metal moving at constant velocity which are modeled as distributed parameter systems, and applies the Paley order of Walsh functions to high order partial differential equations and matrix partial differential equations. This thesis presents a new algorithm which usefully exercises the optimal control in the distributed parameter systems. In this paper, the excellent consequences are found without using the existing decentralized control or hierarchical control method.

• 설비공학논문집
• /
• 제28권9호
• /
• pp.361-366
• /
• 2016

As an alternative of well-mixed storage tank with lower coil only, we have proposed a tank with lower and upper coils and verified a superior thermal stratification in a tank, which results in increased collector efficiency and solar fraction. But the phenomenon of temperature reversal was often experimentally observed in the tank, so a revised control was successfully applied which is to heat only lower coil using three way valve if temperature reversal occurs and to operate the collector with low flow rate when the condition of solar radiation is not good. In the present study, using TRNSYS we compared the existing lower heating and the proposed lower and upper heating with a control preventing temperature reversal. The results showed that the proposed method has an increase of collector efficiency by 5.1% and solar fraction by 3.2%.