• 한국재료학회지
• /
• 제9권2호
• /
• pp.173-180
• /
• 1999

Thermally evaporated ZnTe films were investigated as a back contact material for CdS/CdTe solar cells. Two deposition methods, coevaporation and double-layer methods, were used for Cu doping in ZnTe films. ZnTe layers (0.2$\mu\textrm{m}$ thick) were deposited either on glass or on CdS/CdTe substrates without intentional heating of the substrates. Post-deposition annealing was performed at 200,300 and $400^{\circ}C$ for 3,6 and 9 minutes, respectively. Band gap of 2.2eV was measured for both undoped and doped films and a slight change in the shape of absorption spectra was observed in Cu-doped samples after annealing at $400^{\circ}C$. The resistivity of as-deposited ZnTe decreased from 10\ulcorner~10\ulcornerΩcm down to 10\ulcornerΩcm as Cu concentration increased from 0 to 14 at.%. There was not a noticeable change in less of annealing temperature up to $300^{\circ}C$ whereas films annealed at $400^{\circ}C$ revealed hexagonal (101) orientations as well. Some of Cu-doped ZnTe revealed x-ray diffraction (XRD) peaks related with Cu\ulcornerTe(x=1.75~2). Grain growth was observed from about 20nm in as-deposited films to 50nm after annealing at $400^{\circ}C$ by scanning electron microscopy (SEM). Cu distribution in ZnTe films was not uniform according to Auger electron spectroscopy (AES) measurements.

• 전력전자학회논문지
• /
• 제9권2호
• /
• pp.119-125
• /
• 2004

본 논문에서는 간접 유도가열 되는 보일러 시스템과 주파수 범위가 20〔KHz〕에서 50〔KHz〕사이에서 작동되는 전압형 직렬공진 고주파인버터를 이용하여 열 기체를 발생시키는 전압형 공진형 인버터에 관하여 설명하였다. 얇은 스텐레스 판재가 서로 스폿 용접되어 연결되어있고 기포성 적층형 충진발열체로 특수하게 설계된 유도 가열기는 외부에 워크 코일로 감겨져 있는 불소수지계의 절연용기 안에 삽입되어있다. 이 워크 코일은 공진형인버터와 연결되어 있으며 유도가열기를 통해 흐르는 관 유체를 1단가열부에서 저압의 포화증기를 2단가열부에서 열방사성 증발유체를 생성하는 본 시스템의 성능 및 효용성을 실용적인 측면에서 논의하고 평가한다.

• Korean Chemical Engineering Research
• /
• 제55권4호
• /
• pp.548-555
• /
• 2017

본 연구는 560 MWe급 접선연소식 미분탄 보일러에서 공기단계연소에 의한 연소 및 NOx 배출 특성과 슬래깅성에 대하여 분석한 것이다. 이를 위해 고급 석탄 연소 모델이 적용된 전산유체역학(CFD) 시뮬레이션을 이용하여 전체 연소공기의 당량비(SR)는 1.2로 고정하고, 버너 영역의 SR을 0.94에서 0.995까지 변화시켰다. 공기 배분의 변화에 따라 버너 영역 및 열교환기의 온도 및 전열량 분포가 변하지만 보일러의 전체 효율은 거의 동일하게 나타났다. 버너 영역의 SR이 0.94로 낮아지면 Fuel NO의 생성이 억제되어 절탄기 출구 NOx 배출량은 20% 감소하나, 미연분과 슬래깅성에는 큰 영향이 나타나지 않았다. 따라서, 이 보일러에서 NOx 배출 저감을 위해 공기배분을 조절하여 버너 영역의 SR를 낮추고 상부연소공기(OFA)의 값을 높여 운전하는 것이 타당함을 확인하였다.

• 한국표면공학회지
• /
• 제51권2호
• /
• pp.110-115
• /
• 2018

The Na low temperature gettering in $SiO_2/PSG/SiO_2/Al-1%Si$ and $SiO_2/TEOS/SiO_2/Al-1%Si$ multilevel thin films was investigated using dynamic SIMS(secondary ion mass spectrometry) analysis. DC magnetron sputter, APCVD and PECVD techniques were utilized for the deposition of Al-1%Si thin films, $SiO_2/PSG/SiO_2$ and $SiO_2/TEOS/SiO_2$ passivations, respectively. Heat treatment was carried out at $300^{\circ}C$ for 5 h in air. SIMS depth profiling was used to determine the distribution of Na, Al, Si and other elements throughout the $SiO_2/PSG/SiO_2/Al-1%Si$ and $SiO_2/TEOS/SiO_2/Al-1%Si$ multilevel thin films. XPS was used to analyze chemical states of Si and O elements in $SiO_2$ passivation layers. Na peaks were observed throughout the $PSG/SiO_2$ and $TEOS/SiO_2$ passivation layers on the Al-1%Si thin films and especially at the interfaces. Na low temperature gettering in $SiO_2/PSG/SiO_2/Al-1%Si$ and $SiO_2/TEOS/SiO_2/Al-1%Si$ multilevel thin films is considered to be caused by a segregation type of gettering.

• 대한한방소아과학회지
• /
• 제30권2호
• /
• pp.1-9
• /
• 2016

Objectives Hataedock is a Korean herbal medical oral treatment that removes fetal toxic heat and meconium from new born babies. The purpose of this study is to evaluate whether Hataedock treatment of Duchi extracts has anti-inflammation effects on AD (Atopic Dermatitis)-induced NC/Nga mice. Methods After Hataedock treatment of Duchi extracts on days 0, 3-week-old NC/Nga mice were sensitized on days 28, 35, 42 by exposure of DNFB (dinitrochlorobenzene) and were induced to have AD. Immunohistochemistry of NF-${\kappa}B$ p65, iNOS, COX-2 and TUNEL assay of apoptotic body was used to identify changes of skin damages and anti-inflammation effects. Results The alleviate effect of the skin damage and angiogenesis was observed in DT group. The damage of stratum corneum, hyperplasia, edema, infiltration of lymphocytes and distribution of capillary were decreased in DT group. Also, the study results suggested that Hataedock treatment of Duchi extracts in DT group remarkably downregulated levels of NF-${\kappa}B$ p65 by 70% (p < 0.001), as well as COX-2 by 51%, iNOS by 62% (p < 0.001). Additionally, Hataedock treatment of Duchi extracts in DT group up-regulated apoptosis of inflammatory cells by 68% in atopic dermatitis-like skin lesion. Conclusions From the study results, we observed that Hataedock treatment of Duchi extracts alleviates AD through diminishing various inflammatory cytokines in the skin lesions, which are involved in the initial steps of AD development. It is anticipated to have potential applications for prevention and treatment of atopic dermatitis.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.103-108
• /
• 2003

The effect of equivalence ratio and fuel/air mixing quality on the phase-resolved gas temperatures at different phases of the oscillating pressure cycle was experimentally investigated. An atmospheric pressure, optically accessible and laboratory-scale dump combustor operating on methane with heat release rate of 1.59kW was used. Temperature measurements were made using coherent anti-Stokes Raman spectroscopy (CARS) at several spatial locations for typical unstable combustion conditions. Analysis was conducted using parameters such as phase-resolved averaged temperature, normalized standard deviation and temperature probability distribution functions (PDFs). Also the probability on the occurrence of high temperature (over 1900K) was investigated to get the information on the perturbation of equivalence ratio and NOx emission characteristics. It was shown that most of temperature histograms exhibit Gaussian profile which has short breadth of temperature fluctuation at equivalence ratio of 0.6, while beta profile was predominant for the cases of other equivalence ratios (${\Phi}$=0.55, 0.50). The characteristics on the occurrence of high temperature also displayed periodic wave form which is very similar to the pressure signal. And the amplitude of this profile goes larger as the fuel/air mixing quality become poorer. These also provided additional information on the perturbation of equivalence ratio at flame as well as NOx emission characteristics.

• 한국작물학회지
• /
• 제60권1호
• /
• pp.97-106
• /
• 2015

Platycodon grandiflorum, commonly known as Doraji in Korea, has a wide range of pharmacologic properties, such as reducing adiposity and hyperlipidemia, and antiatherosclerotic effects. However, the mechanisms underlying these effects remain unclear. In order to profile proteins from the nodal segment, callus, root and shoot, high throughput proteome approach was executed in the present study. Two dimensional gels stained with CBB, a total of 84 differential expressed proteins were confirmed out of 839 protein spots using image analysis by Progenesis SameSpot software. Out of total differential expressed spots, 58 differential expressed protein spots (${\geq}$ 2-fold) were analyzed using MASCOT search engine according to the similarity of sequences with previously characterized proteins along with the UniProt database. Out of 58 differential expressed protein, 32 protein spots were up-regulated such as ribulose-1,5-bisphosphate carboxylase, endoplasmic oxidoreductin-1, heat stress transcription factor A3, RNA pseudourine synthase 4, cysteine proteinase, GntR family transcriptional regulator, E3 xyloglucan 6-xylosyltransferase, while 26 differential protein spots were down-regulated such as L-ascorbate oxidase precursor, late embryogenesis abundant protein D-34, putative SCO1 protein, oxygen-evolving enhancer protein 3. However, frequency distribution of identified proteins using iProClass databases, and assignment by function based on gene ontology revealed that the identified proteins from the explants were mainly associated with the nucleic acid binding (17%), transferase activity (14%) and ion binding (12%). In that way, the exclusive protein profile may provide insight clues for better understanding the characteristics of proteins and metabolic activity in various explants of the economically important medicinal plant Platycodon grandiflorum.

• 한국의류학회지
• /
• 제32권7호
• /
• pp.1129-1136
• /
• 2008

The gaiter is one of the personal protective equipments worn in various industrial sites. This study was performed on humans to investigate the physiological strain of wearing gaiters and to compare control gaiters that are currently on the market and new gaiters that are developed for alleviating heat stress. Experiments were conducted in a climatic chamber of WBGT $30.0\pm0.7^{\circ}C$ under five differed experimental conditions: None, Control A, Control B, New A, New B. The results were as follows. The temperature inside gaiters was significantly lower in both New A and New B than in both Control A and Control B and the difference between news and controls was 1$^{\circ}C$ (p<.01). The humidity inside gaiters in both New A and New B were higher than that in Control A, and lower than that in Control B (p<.01). The outermost surface temperature of the gaiter was the lowest in None and it increased in the following order: New B < New A < Control A < Control B. Mean skin temperature was higher by 0.14$^{\circ}C$ in wearing gaiters than in no gaiters. Skin temperatures in lower body were lower in Control than in New and skin temperature in upper body were higher in Control than in New (p<.01). Local sweat rate, total weight loss and subjective sensations did not show a significant difference according to the gaiters. It was concluded that wearing gaiters affected distribution of skin temperature and local sweat rate.

• 한국항공우주학회지
• /
• 제30권5호
• /
• pp.9-14
• /
• 2002

열-기계-전기 하중이 완전 연계된 스마트 구조물의 응력과 변형을 정확히 예측할 수 있는 판 이론을 개발하였다. 두께 방향으로 변위와 온도장은 3차 곡선에 선형 지그재그 장을 중첩하여 구하였다. 횡 수직방향 변형을 고러하기 위해 횡 수직 변위를 두께방향으로, 포물선으로 가정하였다. 전기장은 선형지그재그 형태로 가정하였다. 스마트 구조물의 층에 의존하는 변위장과 온도장의 자유도를 층 사이의 연속조건과, 평판의 위 아래 횡 방향 전단응력이 존재하지 않는다는 조건으로부터, 기준면에 의한 자유도로 나타내었다. 수치 예를 통해 제안된 이론의 정확도와 효율성을 평가하였다. 본 연구에서 제시한 고차 지그재그 이론은 열 환경 하에서 두꺼운 지능 복합재료 평판의 정적, 동적 거동 해석에 사용될 수 있다.

• Progress in Superconductivity
• /
• 제10권1호
• /
• pp.60-67
• /
• 2008

We present domestic efforts for superconducting fault current limiter (SFCL) application in the Korea Electric Power Corporation (KEPCO) grid and pending points at issue. KEPCO's decision to upgrade the 154 kV/22.9 kV main transformer from 60 MVA to 100 MVA cast a problem of high fault current in the 22.9 kV distribution lines. The grid planners supported adopting an SFCL to control the fault current. This environment friendly to SFCL application must be highly dependent upon the successful development of SFCL having specifications that domestic utility required. The required conditions are (1) small size of not greater than twice of 22.9 kV gas insulated switch-gear (GIS), (2) sustainability of current limitation without the line breaking by circuit breakers (CB) for maximum 1.5 seconds. Also, optionally, recommended is (3) the reclosing capability. Conventional resistive SFCLs do not meet (1) $\sim$ (3) all together. A hybrid SFCL is an excellent solution to meet the conditions. The hybrid SFCL consists of HTS SFCL components for fault detection and line commutation, a fast switch (FS) to break the primary path, and a limiter. This characteristic structure not only enables excellent current limiting performances and the reclosing capability, but also allows drastic reduction of HTS volume and small size of the cryostat, resulting in economic feasibility and compactness of the equipment. External current limiter also enables long term limitation since it is far less sensitive to heat generation than HTS. Semi-active operation is another advantage of the hybrid structure. We will discuss more pending points at issues such as maintenance-free long term operation, small size to accommodate the in-house substation, passive and active control, back-up plans, diagnosis, and so on.