• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.53-62
• /
• 1992

본 연구에서는 약 10년 정도 사용하여 경년 열화가 되었다고 예상되는 실구조 물의 일부를 입수하였으며 열화재의 특성과 비교하기 위하여 열처리에 의해 충격치를 회복시킨 재료를 회복재로 하여 두가지 재료에 대해 시험편을 제작하였따.열확현상 을 파악하기 위하여 평활재로 피로과정, 즉 미소 균열의 발생, 진전 및 복수 균열이 간섭합체하여 파단에 달하는 과정에 대하여 파괴역학적 견지에서 열화재와 회복재를 해석하고 이결과로 부터 확율변수를 추정하여 통계학적인 수명예측방법의 하나를 제시 하여 실구조물에 적용하는 방법에 대해 시도해 보았다.

• Food Quality and Culture
• /
• 제2권2호
• /
• pp.61-66
• /
• 2008

The principal objective of this study was to assess the anti oxidative activities of Petasites japonicus against oxidative stress in bovine brain tissue. Petasites japonicus is found with a relatively widespread distribution, and is cultivated as a culinary vegetable in Korea. Petasites japonicus samples were dried either by freeze-drying or by hot air-convection drying ($80^{\circ}C$), then evaluated for their anti oxidative activity by measuring 1-dipheny-1,2-picrylhydrazyl (DPPH) radical scavenging, and by measuring thiobarbituric acid-reactive substances (TBARS) in brain homogenates subjected to $Fe^{2+}$-mediated lipids with or without the addition of botanical extract. Hot air convection-drying resulted in a slight increase in the extraction yield as compared with freeze-drying. However, total phenol and flavonoid contents in freeze-dried Petasites japonicas were significantly higher than those of hot air convection-drying. Freeze-drying increased the free radical scavenging activity of Petasites japonicas, leaves, and stems by 52.6, 28.6, and 248.0%, as compared with hot air convection-drying. Additionally, the $IC_{50}$ values measured by TBARS in hot air convection-dried Petasites japonicas, leaves, and stems were increased by 36.0, 31.6, and 15.9%, as compared to those of freeze-drying. Although anti oxidative activity was reduced slightly by heat processing in Petasites japonicas, freeze-drying for each portion of Petasites japonicus was the most appropriate for use as a functional food and pharmaceutical material.

• The Plant Pathology Journal
• /
• 제25권1호
• /
• pp.70-76
• /
• 2009

The rhizobacteria of Panax notoginseng were isolated from six sites in Yanshan, Maguan and Wenshan Counties, Yunnan Province of China, and their antagonistic activity against P. notoginseng root-rot fungal pathogens was determined. Of the 574 rhizobacteria isolated, 5.8% isolates were antagonistic in vitro to at least one of the five pathogens, Cylindrocarpon didynum, Fusarium solani, Phytophthora cactorum, Phoma herbarum, and Rhizoctonia solani. The number of rhizo bacteria and the number that inhibited fungi differed depending on sampling sites and isolation methods. Rhizobacteria isolated from the site in Yanshan and Maguan showed more antagonistic effect than them in Wenshan. Heat treatment of rhizosphere soil at $80^{\circ}C$ for 20 min scaled the antagonists up to 14.0%. Antagonistic bacteria in the roots proportioned 3.9% of the total isolates. The most antagonistic isolates 79-9 and 81-4 are Bacillus subtilis based on their 168 rDNA sequence and biochemical and physiological characteristics. Identification and evaluation of antagonistic bacteria against P. notoginseng root-rot pathogens in the main planting areas improved our understanding of their distribution in rhizosphere soil. Furthermore these results indicated that the interactions between biocontrol agent and soil microbes should be seriously considered for the successful survival and biocontrol efficacy of the agents in soil.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.942-945
• /
• 2005

Micron-sized metal wires are widely used in industries such as filtration, catalyst and composite materials, etc. In the wire drawing process, the die that is used conventionally is an effective and, at the same time, sensitive component. However, a typical array of the dies has caused many problems in the wire drawing process, e.g., large frictional force on the interface between wire and the resulting high heat generation, precise adjustment of the dies, extended cooling system, die abrasion, etc.. Because of these problems, there have been many works that are aiming at improving the efficiency of wire drawing process by analyzing the die geometry and by applying advanced die material to prolong the die life or even at developing a dieless wire drawing system. This paper is dealing with developing a new wire drawing system that is applicable to reduce the wire drawing steps with high draw ratio. The new wire drawing system does not use the dies, but use the self-induced heater that works on the basis of the resonant phenomenon of wire material. The electromagnetic wave is the heating source. The results of the study on the diameter reduction and microwave flow analysis show that the heating effectiveness of the wire is influenced by the energy distribution in the microwave propagation chamber. We can obtain diameter-reduced wires by using microwave in the dieless drawing process. Microwave as a heating source is capable of producing wires without applying dies in wire drawing process.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.227-237
• /
• 1999

As the interface bonding phenomenon between the matrix and the reinforcements has a large effect on the mechanical properties of MMCs, a sugestion of the strength analysis technique considering the residual stress and the interface bonding phenomenon is very important for the design of pans and the estimation of fatigue behavior. In this paper the three dimensional finite element anaysis is performed during the elasto-plastic deformation of the particulate reinforced metal matrix composites. It was analyzed with the volume fractions in view of microscale. Bonding strength. interface separation and matrix void growth between the matrix and the reinforcements will be predicted on deformation under tensile loading. An interface seperation is estimated by the fracture criterion which is a critical value of generalized plastic work per unit volume. The shape of the reinforcement is assumed to be a perfect sphere. And the type of the reinforcement distribution is assumed as FCC array. The thermal residual stress in MMCs is induced by the heat treatment. It is included at the simulation as an initial residual stress. The element birth and death method of the ANSYS program is used for the estimation of the interface bonding strength, void generation and propagation. It is assumed that the fracture in the matrix region begin to occur under the external loading when the plastic work per unit volume is equal to the critical value. The fracture strain will be defined. The experimental data of the extruded $SiC_p$>/606l Al composites are compared with the theoretical results.

• 터널과지하공간
• /
• 제15권1호
• /
• pp.55-60
• /
• 2005

본 연구는 터널내 화재 발생시 종류식 환기가 연소율 변화에 미치는 영향을 파악하기 위하여 Froude scaling에 의해 1/20크기로 축소한 모형화재 실험을 수행하였다. 화원으로는 $8.5cm{\sim}14.5cm$의 메탄올을 사용하였으며 발열량은 $3.57{\sim}10.95kW$이다. 연소율은 로드셀을 이용하여 산출하였고, 연기거동을 파악하기 위하여 K형 열전대를 이용하여 온도분포를 측정하였다. 풍동은 터널의 한쪽부분과 연결하였고, 터널 공간의 배연속도를 제어하기 위하여 풍동의 전압을 조절하였다. 메탄올 화재인 경우 배연속도가 증가할수록 냉각효과로 인하여 연소율은 감소하였으며, 또한 같은 무차원속도(V)일때 화원 크기가 커짐에 따라 연소율은 감소하였다.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.66-71
• /
• 2011

Recently, the production of shipbuilding and offshore plant industries, with a trend toward large structures, has led to an increased use of high strength ultra-thick plates. The use of ultra-thick plates increases the welding tasks, and the welding process generates distortion and residual stress in the weldment because of the rapid heating and cooling. Welding distortion and residual stress in the welded structure resulte in many troubles such as deformation and life deterioration. In particular, the welding residual stress has an important effect on welding deformation, fatigue, buckling strength, brittleness, etc. The purpose of this study was to evaluate the residual stress at a multi-pass weldment using an experimental method for EH36 high-tension steel. In this experimental method, AIS3000 was used to measure the residual stress of a welded part, HAZ, and base metal; EPMA and XRD were used to study the material properties.

• 대기
• /
• 제21권4호
• /
• pp.415-427
• /
• 2011

In this study, the impacts of land surface conditions, land cover (LC) map and leaf area index (LAI), on the short-range weather forecast over the East-Asian region were examined using Unified Model (UM) coupled with the MOSES 2.2 (Met-Office Surface Exchange Scheme). Four types of experiments were performed at 12-km horizontal resolution with 38 vertical layers for two months, July and August 2009 through consecutive reruns of 72-hour every 12 hours, 00 and 12 UTC. The control experiment (CTRL) uses the original IGBP (International Geosphere-Biosphere Programme) LC map and old MODIS (MODerate resolution Imaging Spectroradiometer) LAI, the new LAI experiment (NLAI) uses improved monthly MODIS LAI. The new LC experiment (NLCE) uses KLC_v2 (Kongju National Univ. land cover), and the new land surface experiment (NLSE) uses KLC_v2 and new LAI. The reduced albedo and increased roughness length over southern part of China caused by the increased broadleaf fraction resulted in increase of land surface temperature (LST), air temperature, and sensible heat flux (SHF). Whereas, the LST and SHF over south-eastern part of Russia is decreased by the decreased needleleaf fraction and increased albedo. The changed wind speed induced by the LC and LAI changes also contribute the LST distribution through the change of vertical mixing and advection. The improvement of LC and LAI data clearly reduced the systematic underestimation of air temperature over South Korea. Whereas, the impacts of LC and LAI conditions on the simulation skills of precipitation are not systematic. In general, the impacts of LC changes on the short range forecast are more significant than that of LAI changes.

• 대한기계학회논문집A
• /
• 제38권7호
• /
• pp.719-725
• /
• 2014

본 연구에서는 사출성형 충전공정 중 금형의 변형을 예측하기 위하여 비뉴턴 유동, 열전달, 구조해석이 함께 고려된 수치해석 연구를 수행하였다. 정밀 사출성형 금형을 설계/제작하기 위해서는 충전공정 중에 발생하는 금형의 변형을 정확하게 예측하는 것이 중요하다. 이와 같은 금형의 국부적인 변형은 다양한 요인에 의해 발생할 수 있으나, 용융된 고분자 수지의 유동에 의한 압력이 가장 큰 원인 중의 하나로 여겨지고 있다. 따라서, 본 연구에서는 2 차원 축대칭 형상의 단순 원형 디스크 제품의 금형을 모델링하고 이에 대한 수치해석을 수행하였다. 이를 바탕으로 금형 내부의 고분자 수지의 유동 특성과 금형 변형량, 온도 분포에 대한 분석을 수행하였다. 또한 다구치 방법을 기반으로 한 실험계획법을 도입하여 유동 속도, 금형 온도, 고분자 수지의 온도가 금형 변형에 미치는 영향을 파악하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.608-610
• /
• 2009

지열 분포에 관련된 지질구조의 특성을 파악하기 위하여 지온경사, 지열류량 자료와 인접한 선구조의 방향성에 대한 상관성 분석을 실시하였다. GIS를 이용하여 지열정보데이터베이스에서 발췌한 209개 지온경사 자료와 218개 지열류량 자료에 대하여 전국 광역단열도로부터 가장 인접한 선구조를 추출하고 10도 간격의 방향별 지온경사 및 지열류량 자료 빈도 및 평균값을 그래프에 도시하였다. 인접 선구조의 방향별 지온경사 평균은 $N30^{\circ}{\sim}40^{\circ}W$, $N10^{\circ}{\sim}20^{\circ}E$ 방향에서 $58.9^{\circ}C/km$, $54.9^{\circ}C/km$로 가장 높았고, 인접 선구조의 방향별 지열류량 평균은 $N80^{\circ}{\sim}90^{\circ}W$, $N50^{\circ}{\sim}60^{\circ}W$ 방향에서 98.71 $mW/m^2$, $98.70mW/m^2$로 가장 높았다. 각 선구조 상의 좌표들을 이용하여 지열류량 분포도에서 지열류량 값을 추출한 결과 $N10^{\circ}W{\sim}N40^{\circ}E$, $N60^{\circ}{\sim}70^{\circ}W$, $N50^{\circ}{\sim}60^{\circ}E$ 방향의 지열류량 높은 것으로 나타났다. 결과적으로 지온경사와 지열류량 자료에 대한 인접 선구조의 방향은 북북동, 북서, 서북서 방향이 우세한 것으로 나타났다. 이는 우리나라 조구조 운동과 관련한 단층, 절리 등의 단열구조의 우세 방향과 잘 일치하는 것으로 해석된다.