• 제목/요약/키워드: Heat detector

검색결과 122건 처리시간 0.027초

우주용 극저온 냉각기 기술개발동향 (Spaceborne Cryogenic Cooler Development Status)

  • 김홍배;이승엽;이원범;김규선
    • 항공우주산업기술동향
    • /
    • 제7권2호
    • /
    • pp.48-58
    • /
    • 2009
  • 1960년대부터 최고 2K까지의 극저온 냉각이 필요한 부품을 탑재하는 위성체의 개발에 극저온 냉각기술들이 채택되어왔다. 최근에는 과학용, 군사용 및 기상관측 임무용등 적외선 광학계를 탑재한 위성개발 프로그램 이 급격히 증가함에 따라 극저온 기술의 괄목할만한 성장을 이루고 있다. 일반적으로 극저온 냉각기술은 적외선 광학계 내에 존재하는 잡음을 최소화하기 위하여 광학 요소 및 검출기를 냉각하는데 사용되며, 요구온도, 열량 및 작동 수명에 따라 요구되는 냉각기술이 달라진다. 본 논문에서는 최근의 우주용 극저온 냉각기술의 동향에 대하여 기술하고자 한다.

  • PDF

몰입형 인터페이스를 위한 햅틱 마우스 (A Haptic Mouse for an Immersive Interface)

  • 김다혜;조성만;김상연
    • 한국멀티미디어학회논문지
    • /
    • 제14권9호
    • /
    • pp.1210-1220
    • /
    • 2011
  • 본 논문에서는 PC 상의 가상환경과 사용자간의 몰입형 상호작용 인터페이스로서 햅틱 마우스 시스템을 제안한다. 제안하는 햅틱 마우스는 진동감각 및 온열감을 제공하여 몰입감을 높인다. 진동 모듈은 편심모터와 솔레노이드 액추에이터로 구성하였으며 온열감 모듈은 작은 필름형태의 온도 센서와 펠티어 효과기반의 열 펌프를 이용하여 구축한다. 본 햅틱 마우스 시스템의 효용성을 보이기 위해 레이싱 게임 어플리케이션을 제작한 후 이를 사용하여 실험을 수행한다. 실험 결과로부터 제안하는 햅틱 마우스가 가상환경에서 몰입감을 증가시키며 가상환경과 사용자간의 효과적인 인터페이스로 사용될 수 있음을 증명한다.

마이크로 가공 기술을 이용한 강유전체 박막 초전형 적외선 센서 (Pyroelectric infrared microsensors made by micromachining technology)

  • 최준임
    • 전자공학회논문지D
    • /
    • 제35D권4호
    • /
    • pp.93-100
    • /
    • 1998
  • Pyoelectric infrared detectors based on La-modified PbTiO3 (PLT) thin films have been fabricated by RF magnetron sputtering and micromachining technology. The detectors form Pb$_{1-x}$ La$_{x}$Ti$_{1-x}$ O$_{3}$ (x=0.05) thin film ferroelectric capacitors epitaxially grown by RF magnetron sputtering on Pt/MgO (100) substrate. The sputtered PLT thin film exhibits highly c-axis oriented crystal struture that no poling trealization for sensing applications is required. This is an essential factor to increase the yield for realization of an infrared image sensor. Micromachining technology is used to lower the thermal mass of the detector by giving maximum sensor efficiency. Polyimide is coated on top of the sensing elements to support the fragile structure and the backside of the MgO substrate is selectively eteched to reduce the heat loss. The sensing element exhibited a very high detectivity D* of 8.5*10$^{8}$ cm..root.Hz/W at room temperature and it is about 100 times higher than the case of micromachining technology is not used. a sensing system that detects the position as well as the existence of a human body is realized using the array sensor.sor.

  • PDF

LCD 패널의 불량을 검출하는 검사용 LED BLU 개발 (Development of a LED BLU Tester Detecting the Errors of LCD Panels)

  • 고훈준;장경수;오주영
    • 한국콘텐츠학회논문지
    • /
    • 제10권5호
    • /
    • pp.62-69
    • /
    • 2010
  • LCD 패널은 자체적으로 발광할 수 없어 외부 광원인 BLU가 필요하다. BLU는 LCD 모듈에 포함되어 사용되고 LCD 패널의 불량을 검사하는 테스터에서도 사용된다. 최근에는 BLU가 CCFL에서 LED로 빠르게 변화되고 증가해왔다. CCFL은 초고압 전원이 필요하고, 열도 많이 발생하며, 일정한 휘도를 유지하기가 어렵다. LED는 전력소모량이 적고, 일정한 휘도를 유지한다. 그러나 현재 테스터에서 사용되는 BLU는 CCFL을 사용하고 있다. 본 연구에서는 LCD 패널의 불량을 검사할 수 있는 검사용 LED BLU를 개발한다. 또한 12~24인치의 LCD 패널을 모두 검사할 수 있도록 LED BLU를 24인치 크기로 제작하고 LCD패널의 크기에 따라 LED BLU가 동작하도록 개발한다.

3C-SiC 마이크로 히터의 제작과 그 특성 (Fabrication of 3C-SiC micro heaters and its characteristics)

  • 정귀상;정재민
    • 센서학회지
    • /
    • 제18권4호
    • /
    • pp.311-315
    • /
    • 2009
  • This paper describes the characteristics of a poly 3C-SiC micro heater which was fabricated on AlN(0.1 $\mu$m)/3C-SiC(1.0 $\mu$m) suspended membranes by surface micro-machining technology. The 3C-SiC and AlN thin films which have wide energy band gap and very low lattice mismatch were used sensors for high temperature and voltage environments. The 3C-SiC thin film was used as micro heaters and temperature sensor materials simultaneously. The implemented 3CSiC RTD(resistance of temperature detector) and the power consumption of micro heaters were measured and calculated. The TCR(thermal coefficient of the resistance) of 3C-SiC RTD is about -5200 ppm/$^{\circ}C$ within a temperature range from 25 $^{\circ}C$ to 50 $^{\circ}C$ and -1040 ppm/$^{\circ}C$ at 500 $^{\circ}C$. The micro heater generates the heat about 500 $^{\circ}C$ at 10.3 mW. Moreover, durability of 3C-SiC micro heaters in high voltages is better than Pt micro heaters. A thermal distribution measured and simulated by IR thermovision and COMSOL is uniform on the membrane surface.

모멘트 법을 이용한 그래파이트의 1,2-디클로로벤젠 흡착특성 연구 (Study of 1,2-Dichlorobenzene Adsorption Characteristics on Graphite using Moment Method)

  • 남경수;권상숙;유경선
    • 공업화학
    • /
    • 제18권6호
    • /
    • pp.603-606
    • /
    • 2007
  • ECD가 장착된 기체크로마토그래프를 이용하여 다이옥신과 구조적으로 유사한 1,2-디클로로벤젠의 그래파이트 흡착특성을 고찰하였다. 그래파이트에서 1,2-디클로로벤젠의 평형흡착상수는 흡착온도 220, 240, $260^{\circ}C$에서 각각 10.333, 6.167, $4.270m^3/kg$ 값을 나타내었다. 표면 흡착열은 11.554 kcal/mol로 나타났으며 이는 그래파이트의 비표면적이 작고 표면기능기의 양이 적었기 때문이다.

NEUTRON-INDUCED CAVITATION TENSION METASTABLE PRESSURE THRESHOLDS OF LIQUID MIXTURES

  • Xu, Y.;Webster, J.A.;Lapinskas, J.;Taleyarkhan, R.P.
    • Nuclear Engineering and Technology
    • /
    • 제41권7호
    • /
    • pp.979-988
    • /
    • 2009
  • Tensioned metastable fluids provide a powerful means for low-cost, efficient detection of a wide range of nuclear particles with spectroscopic capabilities. Past work in this field has relied on one-component liquids. Pure liquids may provide very good detection capability in some aspects, such as low thresholds or large radiation interaction cross sections, but it is rare to find a liquid that is a perfect candidate on both counts. It was hypothesized that liquid mixtures could offer optimal benefits and present more options for advancement. However, not much is known about radiation-induced thermal-hydraulics involving destabilization of mixtures of tensioned metastable fluids. This paper presents results of experiments that assess key thermophysical properties of liquid mixtures governing fast neutron radiation-induced cavitation in liquid mixtures. Experiments were conducted by placing liquid mixtures of various proportions in tension metastable states using Purdue's centrifugally-tensioned metastable fluid detector (CTMFD) apparatus. Liquids chosen for this study covered a good representation of both thermal and fast neutron interaction cross sections, a range of cavitation onset thresholds and a range of thermophysical properties. Experiments were devised to measure the effective liquid mixture viscosity and surface tension. Neutron-induced tension metastability thresholds were found to vary non-linearly with mixture concentration; these thresholds varied linearly with surface tension and inversely with mixture vapor pressure (on a semi-log scale), and no visible trend with mixture viscosity nor with latent heat of vaporization.

수치해석을 이용한 화재감지기 철도터널 화재 감지특성 연구 (Sensing Characteristics of Fire Detectors in Railway Tunnel by Using Numerical Analysis)

  • 박원희
    • 한국산학기술학회논문지
    • /
    • 제16권11호
    • /
    • pp.7964-7970
    • /
    • 2015
  • 터널과 같은 밀폐 공간에서는 화재시 발생하는 열과 연기로 인하여 터널내의 승객들에게 심각한 피해를 입힐 수가 있다. 이러한 피해를 최소화하기 위하여 터널의 화재를 조기감지하기 위하여 화재감지기가 터널에 설치된다. 철도터널의 화재감지기 성능시험 방법 정립을 위한 제한된 규모의 화원에서의 터널 상부 및 측벽에 설치된 화재감지기의 감지특성을 수치해석을 이용하여 분석하였다. 화재영향 수치해석을 위하여 NIST에서 개발한 FDS 프로그램을 사용하였으며, 터널벽의 온도를 현실적으로 계산하기 위하여 터널 외부의 구조를 가정하여 고려하였다. 화원크기에 따른 화재감지기별 화재감지 시간을 터널 위치별로 산출하여 비교 분석하였다.

용액 공정 기반 NiO/ZnO계 자외선 센서용 재료 특성 연구 (A Study on the Material Characteristics of the NiO/ZnO Ultraviolet Sensor Based on Solution Process)

  • 문성철;이지선;노경재;양성주;이성의
    • 한국전기전자재료학회논문지
    • /
    • 제30권8호
    • /
    • pp.508-513
    • /
    • 2017
  • Ultraviolet (UV) photodetectors are used in various industries and fields of research, including optical communication, flame sensing, missile plume detection, astronomical studies, biological sensors, and environmental research. However, general UV detectors that employ Schottky junction diodes and p-n junctions have high fabrication cost and low quantum efficiency. In this study, we investigated the characteristics of materials used to manufacture UV photodetectors in a low-cost solution process that requires easy fabrication of flexible substrates. We fabricated p-type NiO and n-type ZnO substrates with wide band gap by the sol-gel method and compared the characteristics of substrates prepared under different spin-coating and heat-treatment conditions.

지하공동구 화재 실험 및 시뮬레이션에 의한 화재 설칠 예측 평가 (Estimation of fire Experiment Prediction by Utility Tunnels Fire Experiment and Simulation)

  • 윤명오;고재선;박형주;박성은
    • 한국화재소방학회논문지
    • /
    • 제15권1호
    • /
    • pp.23-33
    • /
    • 2001
  • 지하공동구는 최근 통신의 발달로 인해 국가 중추기능으로서의 주요 역할을 하는 시설로, 사고시 신속한 대처가 힘들고 케이블 연소시 발생하는 유독가스에 의한 검은 연기로 공동구 내에 진입하여 소화화기가 힘들다. 따라서, 화재발생시 막대한 재산피해 및 통신의 두절 등 국가의 중추신경이 마비됨은 물론 시민 불편사항을 초래시켰다. 본 논문은 지금까지 발생되어온 공동구 화제를 바탕으로 실제 공동구 모형을 제작하여 화재를 재현함으로서, 과학적으로 화재의 성상을 분석하고 지하공동구 내에 소방설비를 갖춘 후에 일정온도에서 각각의 소방설비들이 제대로 작동하는지를 검증하는데 그 목적이 있다. 화재실험은 지하 공동구 내에 정온식 감지선형 감지기, 방화문, 연결살수설비 및 환기설비를 설치하고 송.배전케이블은 일정구간 내화도료로 도장하며 난방관은 내화피복된 상태에서 실험하였다. 그 결과 최고 온도가 $932^{\circ}c$로 측정되었고 일정온도에서 정온식 감지선형 감지기가 작동하여 화재위치를 정확히 수신반에 나타내었다. 그리고 송.배전케이블은 일정구간 내화도료로 도장한 것은 내화성능이 없는 것으로 나타났고, 내화피복된 난방관은 약 30분 정도의 내화 성능이 있는 것으로 나타났다. 컴퓨터 화재 시뮬레이션은 실제 화재 시험시의 화재하중을 입력하여 실시한 결과 최고 온도가 $943^{\circ}c$로 실제 화재시의 최고 온도인 $932^{\circ}c$와 거의 일치하였다. 따라서 공동구 화재하중만으로 화재 시뮬레이션을 실시하여 화재의 성상에 대한 예측이 가능한 것으로 판단되며 시뮬레이션으로 얻는 열방출량, 연기층의 높이, 산소, 일산화탄소, 이산화탄소의 농도 등의 결과 값들을 실제 화재 실험시의 값으로 적용시킬 수 있는 것으로 판단된다. 0.05ppb보다 높은 수준으로 예측되어 유럽의 허용기준치를 초과하는 것으로 나타났다.확보를 위한 위생관리 업무 향상을 위해서는 본 연구에서 가장 취약한 부분으로 드러난 시설 및 기기들을 우선 보완해야 할 것으로 사료된다.ons. Specific growth rate of dechlorinators showed little difference between the slurry and the low-moisture sediments; however, growth yield was high in the sediments of reduced moisture content. The reduction of sediment moisture decreased the dechlorination rate and extent of PCBs but did not inhibit the growth of PCB dechlorinators.1.4mg, 여학생이 159.3mg이었다. 이상의 결과로 보아 에너지, 단백질, 칼슘, 비타민 A 등 대부분의 영양소 섭취량이 권장량에 미치지 못하여 성장기에 있는 아동들의 영양소 섭취 상태에 문제가 있음을 시사해 주었다. 5. 조사 대상자의 식습관과 영양소 섭취량의 상관관관계는 식사 시간의 규칙성은 단백질, 식이성 섬유소, 비타민 A 및 티아민섭취량과 양의 상관을 나트륨섭취량과는 음의 상관관계가 있었다. 음식의 간(염도)은 인과 콜레스테롤 섭취와 음의 상관관계를 나타냈다. 들깨가루나 들기름 사용 여부는 열량, 탄수화물 및 인의 섭취량과 음의 상관을, 지방, 철분, 리보플라빈 및 나이아신섭취량과는 양의 상관관계를 나타냈었다. 결식여부는 지방, 철분 및 나이아신섭취량과는 양의 상관관계를, 열량, 탄수화물, 인 나트륨, 및 콜레스테롤섭취량과는 음의 상관을 보였다. 외식이

  • PDF