• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.25-28
• /
• 2008

The fuel cell system is environment-friendly and energy efficient system. Especially, the fuel cell cogeneration systems providing heat and electricity to buildings have been developed and applied to a lot of sites in the world to cope with the global warming and $CO_2$ emission problem. This paper presents the result of study on the economic evaluation with super-micro fuel cell (SMFC) cogeneration system by varying the floor area ($132m^2{\sim}331m^2$) of the house, whose system capacity ranges from 0.10 kWe to 0.50 kWe. The electricity demand, heat demand, saved energy cost, and the simple pay-back period have been simulated for the various capacities of fuel cell cogeneration system. As a result, this study suggests the fuel cell system's capacity decision strategy for a given house area. Contrary to conventional design assumptions, the smaller capacity fuel cell cogeneration system is appropriate for the house of large floor area to defense the progressive electricity tax, and the larger capacity fuel cell cogeneration system is appropriate for the house of small floor area to sell the electricity.

• Advances in Energy Research
• /
• 제6권2호
• /
• pp.145-160
• /
• 2019

The world population reaches to about 7.7 billion in 2018 from 6.2 billion in 2000. This much growth in population results in increased energy demand and increased food supply. As the conventional energy sources are limited. These may deplete soon if consumed at this rate. So, the world is switching towards the utilization of non-conventional sources of energy. Energy from sun is the best method as it can not only solve the energy issue but also helps in meeting food demand by conserving it. Greenhouses are made for the purpose of food conservation. Various types of solar dryers are developed by researchers till now and still the effort is being putted to make them more efficient. Hybrid greenhouse is also effort toward utilization of solar energy in more efficient way. The paper presents the heat and mass transfer analysis of hybrid greenhouse solar dryer developed by different researchers till now. The review helps the researcher in understanding the heat and mass transfer taking place inside the hybrid greenhouse and how it can be further improved.

• 조명전기설비학회논문지
• /
• 제28권6호
• /
• pp.40-44
• /
• 2014

In this paper, maximum power is the lowering device using the facility's energy use and peak load electricity through analyzing attitude should like to make it reduce its power base rate. Simulator to manage the demand for power, a maximum electric power base power from electronic watt-hour meters by a device's signal, predictive power, the current power by computing the goal of power for less than Maximum peak power and peak shift, so that you can manage, and peak York, which role you want a cut Metal heat treatment result which analyzes the data, demand for electricity company over the years of analyzing the characteristics of each load, and effects and Reducing power consumption device every month identified seven Sequence control to the load system and successful power control is about showing that the defined goals.

• 에너지공학
• /
• 제18권4호
• /
• pp.221-229
• /
• 2009

본 연구에서는 지역난방 수도권 지사별 실태 및 영향인자 진단 분석을 통해 개별지사와 연계지사간의 효율적이며 경제적인 운전을 할 수 있는 최적화 운전 프로그램을 개발하고 이를 통해 실제보다 최적화 운전시 어느정도 경제적 효과가 있는지를 확인해 보고자 하였다. 이를 위해 각 지사별 실태조사를 통해 보일러, 펌프, 관련Tag(온도, 압력, 연료량)등 다양한 인자를 진단/분석하였고 최적화 프로그램 개발을 위해 방대한 1년간 데이터를 인자별 Data base를 구축할 수 있었다. 또한 이를 통해 지사별 최적화 프로그램을 개발하여 수행한 결과, 최적화 선호도는 "소각장 >한전수열 >CHP >PLBs >PLBw"이었으며 연계를 제외한 각 지사별 실제운전과 최적화 운전 비용차이가 거의 없었다. 한편, 통합운영 최적화 프로그램을 개발하여 실제와 동일한 총 생산열량과 동일한 한전수열량과 같은 고정인자는 변동치 않고 단지 연계공급/수급열량만을 프로그램을 통해 최적조건(가장 저렴하고 효율적인 열량을 우선공급하는 조건)으로 효율적으로 운전한 결과, 사계절별 임의로 선정된 2~4일에 대한 일일 절감율 2.45~6.80%, 일일 절감액 22,727천원~60,077천원을 나타내었는데, 특히 겨울철에 제일 많은 수요량을 나타내며 가장 많은 절감비용을 얻을 수 있었고 수요량이 적은 여름철이 절감비용이 가장 작았다. 이러한 결과를 토대로 1년간 실제 열량 생산비용 대비 연간 절감비용을 환산하면 이론적으로 84억원이며 이는 수도권 전지사의 연간 총 열생산 비용(3,070억원)의 2.74%이상을 절감하는 경제적 효과가 있음을 확인할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.87.2-87.2
• /
• 2010

The steady and dynamic process model for an internal reforming molten carbonate fuel cell power plant is discussed in this paper. The dominant thermal and chemical dynamic processes are modeled for the stack module and balance-of-plant, including cathode gas preparation, heat recovery, heat loss (Each heat loss amount for the stack and MBOP is obtained from real plant data) and fuel processing. Based on dynamic model and control demand, PID controllers are designed in the whole system. By applying these controllers we can obtain temperature balance of stack and control system depending on changing steam to carbon ratio, air feed amount, and transient condition.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.99.1-99.1
• /
• 2016

The materials for an electronic packaging provide diverse important functions including electrical contact to transfer signals from devices, isolation to protect from the environment and a path for heat conduction away from the devices. The packaging materials composed of metals, ceramics, polymers or combinations are crucial to the device operating properly and reliably. The demand of effective charge and heat transfer continuous to be challenge for the high-speed and high-power devices. Nanomaterials including graphene, carbon nanotube and boron nitride, have been designed for the purpose of exploiting the high thermal, electrical and mechanical properties by combining in the matrix of metal or polymer. In addition, considering the inherent electrical and surface properties of graphene, it is expected that graphene would be a good candidate for the surface layer of a template in the electroforming process. In this talk, I will present recent our on-going works in nanomaterials for microelectronic packaging: 1) porous graphene/Cu for heat dissipations, 2) carbon-metal composites for interconnects and 3) nanomaterials-epoxy composites as a thermal interface materials for electronic packaging.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.397-402
• /
• 2001

Due to the recent economic growth and the subsequent increase in demand of electricity, the construction of underground transmission line is also on the rise. Especially, in the metropolitan area, we have much obstruction in laying the line to the central district because of difficulties in procurement of construction land and the increase in the construction cost. Therefore, the necessity of increasing the capacity of transmission line has been suggested. In order to increase the capacity, the electric voltage and current intensity in size-limited lines should be also increased. But, eventually, it leads to the generation of unnecessary heat and the heat radiates through insulation cables and backfill concrete. So we need to develop the material that has good heat radiation characteristics. In this study, we developed and tested backfill concrete that can be a substitute for previously used backfill sand.

• 한국기계가공학회지
• /
• 제5권2호
• /
• pp.56-64
• /
• 2006

Rapid progress in many branches of technology has led to a demand on new materials such as high strength light weight alloys, powdered alloys and composite materials. The hydrostatic extrusion is essentially a method of extruding a clad rod through a die. In order to investigate the effect of the process conditions such as friction heat, deformation and clad thickness on the clad extrusion process, viscoplastic finite element simulations were conducted. A specific model for theoretical analysis used in this study is The single scalar variable version of Hart's model. An experiment also has been carried out using 1.5MN hydrostatic extruder with variable speed ram, LVDT and load cell for comparison. It is found that the hydrostatic extrusion pressure considering the effect of heat dissipation in this theoretical work was closer to the experimental pressure than the isothermal hydrostatic extrusion pressure.

• 설비공학논문집
• /
• 제5권4호
• /
• pp.265-277
• /
• 1993

Recently, underground transmission system is growing continuously according to the electric power demand increase in the downtown area. Even if domestic cable makers are manufacturing 154kV oil filled cable and joint, the design technology of cable-joint has not been fully self-reliance. This study is aimed at the detail heat transfer analysis of 154kV cable-joint. So, that is cut into the five sections in order to analyze a conjugate natural convection in two dimensional $r-{\theta}$ coordinate. The streamline and temperature distributions are obtained for each sections. Also the changes of those are analyzed with respect to the variation of transmission currents and cable-joint surface heat transfer coefficients. The same analyses are also shown in view point of the maximum temperature of conductor and local equivalent conductivity.

• 한국기계가공학회지
• /
• 제8권1호
• /
• pp.3-9
• /
• 2009

Recently, a high speed cutting is essential requirement to satisfy latest demand of high precision product and machining of hard materials. However heat generation by high speed rotation causes many problems. The machining error and shortening spindle lifetime by thermal stress is typical example. Generation of heat is mostly caused by sliding at the rotor and bearing. For minimization of heat generation at bearing, decision of the condition of proper lubrication is necessary. The thermal study about 40,000rpm spindle by changing the condition of oil-air lubrication method is carried out in this paper. The results of this paper can be used effectively in the decision of oil-air lubrication condition of other types of spindle for machine tools.