• 한국수소및신에너지학회논문집
• /
• 제29권4호
• /
• pp.357-362
• /
• 2018

In this study, computer simulation and optimization works have been performed for a refrigeration cycle using ammonia as a refrigerant and also how much power was saved when the liquefied natural gas cold heat is replaced for the refrigeration cycle. PRO/II with PROVISION release 10.0 from Schneider electric company was used, and Peng-Robinson equation of the state model was selected for the modeling of the refrigeration cycle and LNG cold heat utilization process.

• 한국수소및신에너지학회논문집
• /
• 제30권2호
• /
• pp.188-192
• /
• 2019

Comparative studies between single- and two-stage expansion process using LNG cold heat have been performed for a closed Rankine power generation cycle. PRO/II with PROVISION release 10.0 from Schneider Electric Company was used, and the Peng-Robinson equation of state model with Twu's alpha function was selected for the modeling and optimization of the power generation cycle using LNG cold heat. In two-stage power generation cycle, 6.7% more power was obtained compared to that of single-stage power generation cycle through the optimization works.

• 열처리공학회지
• /
• 제17권4호
• /
• pp.211-215
• /
• 2004

Conventional spheroidization process of cold heading quality steels requires long heat treatment time, and reduction of the heat treatment time is important for improving productivity in the industry. Recently, hot deformation method has been proposed as a means of increasing spherodization kinetics. In this study, the influences of hot deformation on the spherodization behavior of cold heading quality steels were investigated. Hot deformation at the temperature range of $700^{\circ}C$ significantly enhances the spheroidization kinetics. Hot deformation can lead to a substantial reduction of spherodization process time as low as 1~5 hrs.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.15-20
• /
• 2015

본 연구의 목적은 전기동력 자동차의 전기-전자 장비들을 효과적으로 냉각시키면서 자체적으로 에너지 소비를 최소화 시킬 수 있는 노력의 일환으로, 단순 열전달 모델을 이용하여 윅이 있는 히트파이프의 열전달 및 유동 특성을 고찰하는 것이다. 이를 위하여 히트파이프는 COMSOL프로그램을 이용하여 해석하였고, 작동유체로 물을 이용하였다. 또한, 히트파이프의 속도 및 온도 특성을 히프파이프 길이에 따라 해석하였고, 국소 및 평균 Nu수를 계산하였다. 결과적으로, 히트파이프의 관성력은 가열면과 냉각면의 온도차에 의하여 발생하였다. 히트파이프내 열전달은 가열면에서 냉각면으로 발생하고 히트파이프 중앙으로 갈수록 증가하였다. 더불어, 가열면의 Nu수는 최대 4.47로 나타났으며, 평균 Nu수는 1.88이고, 냉각면의 Nu수는 최대 0.7로 나타났으며, 평균 Nu수는 0.1이다.

• 한국초등과학교육학회지:초등과학교육
• /
• 제22권1호
• /
• pp.15-28
• /
• 2003

The purpose of this study was to explore the relationships between the concept of heat and that of temperature for elementary students. Eight multiple choice type questions with explanation of reasons for selection were developed based on previous researches and the analysis of science curriculum for elementary students. The students of 9, 10, 11 years(n=292) were selected from two elementary schools in Taegu City. The responses of students' multiple choice and their explanations were analysed in each items χ² test used for the relationships between types of heat and temperature conceptions Half of elementary student could discriminate the two terms of heat and temperature, majority of them thought that heat is likely to be hot and temperature is the quantity of heat, which is not based on scientific conception. Elementary students thinkings about heat could be classified with material type of heat and molecular kinematics type. Material type of heat were more popular than with molecular kinematics type, although the latter is increased. Majority of students answered correctly in qualitative questions of mixing of hot and cold water, but about only one third of them answers in quantitative questions. Subtraction of cold temperature from hot temperature was the most popular explanation, even though one-quarter of students summed up the two temperature in quantitative situation of mixing hot and cold waters. Those who thought heat as the molecular kinetic responded more correctly in most difficult questions than those who as the material. Therefore, we concluded that the types of heat conceptions affected the concept formation of temperature.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.261-264
• /
• 2003

Cold weather can lead to many problems in mixing, placing, setting time, and curing of concrete that can have harmful effects on its properties and service life. Korean Concrete Institute (KCI) defines cold weather as a period when the average daily air temperature is less $4^{\circ}C$ and recommends to cast concrete with special care such as shielding, heating and so on. The use of high early strength cements may improve the rate of hardening characteristics of concrete in cold weather by making it possible to achieve faster setting time and evolving more hydration heat than ordinary Portland cement. Higher early strength can be achieved using Type III cement especially during the first 7 days. The strength increase property of Type III cement at low temperature was studied. As a conclusion the heat or heat insulation curing period can be reduced to 50~75%. So, it can be used for cold weather concreting to reduce construction cost and extend the construction season.

• 한국수소및신에너지학회논문집
• /
• 제31권3호
• /
• pp.322-327
• /
• 2020

In this work, a study for the reduction of the electric power consumption has been estimated in main air compressors in the air separation unit through cryogenic distillation columns with PRO/II with PROVISION V10.2 at AVEVA company. Both required LNG mass flow rate and cold heat contained in 1 ton of LNG were also predicted using Peng-Robinson equation of state with Twu's new alpha function. Through this work, we concluded that 32.33-48.69% of electric power could be saved by using LNG cold heat.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.400-403
• /
• 2004

A non-heat기leafed steel does not need quenching and tempering processes that are called a heat treatment differently from conventional steel. Since the tensile strength of this steel is higher than 900MPa, a conventional forming process should be changed to incremental forming process such as a cross wedge rolling that requires lower load capacity than conventional ones. In this paper, the cold cross wedge rolling (CWR) die has been designed using CAD/CAE In order to produce near-net-shaped component of ball stud of non-heat-treated cold steel. Finite element analyses were applied in order to investigate process parameters of CWR. Results provide that the stretching angle and the forming angie at knifing zone in CWR process is important parameter to be the stable process under the low friction coefficient condition.

• 대한한방내과학회지
• /
• 제43권6호
• /
• pp.1063-1074
• /
• 2022

Objectives: The aim of this study was to investigate the differences in the prevalence of metabolic syndrome (MetS) according to the Sasang constitution (SC) and cold and heat pattern identification (CHPI). Methods: SC, CHPI, MetS, and component data were obtained from 2,561 participants in 26 Korean medical clinics from 2007 to 2013. SC, diagnosed by Korean medicine doctors, was confirmed by positive responses to herbal medicines administered according to that constitution. The CHPI was verified by a questionnaire about thermal sensitivity and drinking habits. The diagnosis criteria for MetS were: 1) waist circumference (WC) ≥90 cm (male) and ≥80 cm (female); 2) triglycerides ≥150 mg/dL; 3) high density lipoprotein cholesterol (HDL) <40 mg/dL (male) and <50 mg/dL (female); 4) blood pressure ≧130/85 mmHg; and 5) fasting blood glucose ≥100 mg/dL. Odds ratios (ORs) and differences in MetS and its components were compared using logistic regression and ANCOVA. Results: The MetS prevalence rates were 54.1%, 22.0%, and 33.3% for Taeeumin (TE), Soeumin (SE), and Soyangin (SY), respectively, and 30.5% and 44.5% for the cold and heat patterns, respectively. ANCOVA for MetS components showed significantly higher WC in TE than in SE or SY, and all components except HDL were higher in the heat pattern group than in the cold pattern group. Logistic regression for MetS prevalence showed a significant association between TE and the heat pattern group (OR=1.653) but not for non-TE and the cold pattern group. Conclusions: Considering SC and CHPI together may be more effective in managing MetS than considering SC alone.

• 동의생리병리학회지
• /
• 제27권5호
• /
• pp.553-562
• /
• 2013

This study was performed to develop cold-heat and deficiency-excess pattern identification for dementia, as well as for standard Korean medicine diagnosis and treatment. Five experts comprised of 4 neuropsychiatrists of Korean medicine and 1 statistician to develop cold-heat and deficiency-excess pattern identification for dementia. We searched studies about pattern identification and selected 507 articles using Oasis search terms provided by the KIOM. As a result, 10 pattern identification research study were recruited. Moreover, we analyzed neuropsychological assessments for dementia that evaluate Behavioral and Psychological Symptoms of Dementia (BPSD) and cognitive function using experts conferences and we selected neuropsychological instruments using pattern identification. Six cold patterns, six heat patterns, ten deficiency patterns, and four excess patterns were identified according to the cold-heat and deficiency-excess pattern identification of dementia. We selected the Caregiver-Administered Neuropsychiatric Inventory and the Korean Mini-Mental State Examination as neuropsychological assessments of dementia, which examine behavioral symptoms and cognitive function, suspectively. We formed positive and negative correlation between Korean medicine pattern identification and neuropsychological assessments for dementia. We developed and suggested a forecast module of pattern identification for dementia. But, it is necessary to perform additional clinical trials to verify its validity and accuracy.