• Journal of Photoscience
• /
• 제5권1호
• /
• pp.39-43
• /
• 1998

Pulsed Er: YAG and CO$_2$ lasers induced temperature rise of tissue is studied using axisymmetric, two-dimensional, and transient Pennes bio-heat equation for elucidating the implications of skin resurfacing. Modeling indicates that Er:YAG laser induced temperature has much higher but more shallow distribution in tissue than that of the CO$_2$ laser because of much higher absorption coefficient. The increase of repetition rate does not much affect on temperature rise because these laser modalities have much shorter heat diffusion time than the temporal length of each off-pulse. This model works as a tool to understand the photothermal effect in the laser-tissue interaction.

• 동력기계공학회지
• /
• 제17권5호
• /
• pp.44-51
• /
• 2013

This paper proposes and analyzes recycling of optical phonons emitted by nonradiative decay, which is a major thermal management concern for high-power light emitting diodes (LED), by introducing an integrated, heterogeneous barrier cooling layer. The cooling is proportional to the number of phonons absorbed per electron overcoming the potential barrier, while the multi-phonon absorption rate is inversely proportional to this number. We address the theoretical treatment of photon-electron-phonon interaction/transport kinetics for optimal number of phonons (i.e., barrier height). We consider a GaN/InGaN LED with a metal/AlGaAs/GaAs/metal potential barrier and discuss the energy conversion rates. We find that significant amount of heat can be recycled by the barrier transition cooling layer.

• 설비공학논문집
• /
• 제11권3호
• /
• pp.414-421
• /
• 1999

Falling film rectification involves simultaneous heat and mass transfer between vapor and liquid interface. In the present work, the adiabatic rectification process of ammonia-water vapor on the vertical plate was investigated. The continuity, momentum, energy and diffusion equations for the solution film and vapor mixture were formulated in integral forms and solved numerically. The model could predict the film thickness, the pressure gradient, and the mass transfer rate. The effects of Reynolds number and ammonia concentration of solution and vapor mixture, rectifier length, and the enhancement of mass transfer in each phases were investigated. The stripping of water in vapor mixture occurred new the entrance of ammonia solution, which imposed the proper size of an adiabatic rectifier. Rectifier efficiency increased as film Reynolds number increased and as vapor mixture Reynolds number decreased. The improvement of rectifier efficiency was significant with the enhancement of mass transfer in falling film.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제8권2호
• /
• pp.69-79
• /
• 2000

Falling film rectification involves simultaneous heat and mass transfer between vapor and solution film. In the present work, the adiabatic rectification process of ammonia-water vapor by the falling solution film on the vertical plate was investigated. The continuity momentum, energy and diffusion equations for the solution film and the vapor mixture were formulated in integral forms and solved numerically, The model could predict the film thickness, the pressure gradient, and the mass transfer rate. The effects of Reynolds number and ammonia concentration of solution and vapor mixture, rectifier length, and the enhancement of mass transfer coefficient in each phases were investigated. The stripping of water in vapor mixture occurred near the entrance of ammonia solution, which imposed the proper size of an adiabatic rectifier. Rectifier efficiency increased as film Reynolds number increased and as vapor mixture Reynolds number decreased. The improvement of rectifier efficiency was significant with the enhancement of mass transfer coefficient in falling film.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.199-204
• /
• 1999

Three dimensional numerical analysis for the turbulent reactive flow and radiative heat transfer in the walking beam type of a reheat furnace in POSCO has been carried out by the industrial code FLUENT. Computations an based on the conservation equations of mass, momentum, energy and species with the $k-{\varepsilon}$ turbulence model and mixture fraction/PDF(Probability Density Function) approach for the combustion rate. Radiative heat transfer is computed by the discrete ordinates radiation model in combination with the weighted-sum-of-gray-gas model for the absorption coefficient of gas medium. The predicted temperture distribution in the reheat furnace and energy flow fractions are in reasonable agreement with the measurement data.

• 대한기계학회논문집B
• /
• 제38권5호
• /
• pp.389-397
• /
• 2014

흡수식 냉온수기는 자연에 있는 냉매를 사용함으로 인해 환경오염이 매우 적어 친환경적이다. 흡수식 냉온수기에서 고효율의 배기가스용 고온재생기는 높은 시스템 성능을 얻기 위한 중요한 요소중에 하나이다. 따라서, 본 연구에서는 운전조건에 따른 흡수식 냉온수기의 배기가스용 고온재생기의 성능을 파악하기 위해 실험장치를 제작하고 실험을 실시하였다. 배기가스용 고온재생기에서 흡수액의 입구상태는 성능변화에 매우 큰 영향을 줌으로 여러 가지 흡수액 농도 조건에서 공기측 입구온도와 질량유량을 변화시켜가면서 고온재생기의 성능을 고찰하였다. 실험결과, 공기측 질량유량비가 80%에서 120%로 증가할 때 흡수액 농도가 56%, 55%, 54%, 53%에서의 열교환량은 각각 30%, 33%, 34%, 37% 정도 증가하였다. 또한 고온재생기의 흡수액 입구농도가 56%, 55%, 54%, 53% 일 때 공기측 입구온도가 $170^{\circ}C$에서 $210^{\circ}C$로 증가함에 따라 고온재생기의 열교환량은 각각 140%, 160%, 220%, 224% 정도 증가하였다.

• 한국표면공학회지
• /
• 제36권5호
• /
• pp.406-412
• /
• 2003

FT-IR and thermography were used to investigate the infrared radiation characteristic of SiO$_2$ film and SiO$_2$/Fe$_2$O$_3$film coated on aluminum. Through FT-TR spectrum, SiO$_2$film showed high infrared absorption in accordance with the stretching vibration of Si-O-Si, and as$ Fe_2$$O_3$was mixed additional absorption band appeared resulting from the stretching vibration of Fe-O at $590cm^{-1}$ and the bond of Si-O-Fe at $900 cm^{-1}$ The two kinds of film measured by the integration method and the reflective method coincided with each other in the wavelength area of infrared absorption and radiation, and corresponded well with Kirchhoff's law as the infrared emissivity is high in wavelength where infrared absorption rate is high. The emissivity of $SiO_2$ film was 0.65 and that of $SiO_2$/Fe$_2$$O_3$film was 0.77, so the addition of$ Fe_2$$O_3$ raised the infrared emissivity by approximately 13%.$ SiO_2$$Fe_2$$O_3$ film is efficient as an infrared radiator at below $100^{\circ}C$. The temperature of heat radiation after 7 minutes was 117$^{\circ}C$ in aluminum plate and $155^{\circ}C$ in $SiO_2$$Fe_2$$O_3$ film, $38^{\circ}C$ higher than the former.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.645-649
• /
• 2009

Liquid desiccant cooling technology can supply cooling by using waste heat and solar heat which are hard to use effectively. For compact and efficient design of a dehumidifier, it is important to sustain sufficient heat and mass transfer surface area for water vapor diffusion from air to liquid desiccant on heat exchanger. In this study, the plate type heat exchanger is adopted which has extended surface, and hydrophilic coating and porous layer coating are adopted to enhance surface wettedness. PP(polypropylene) plate is coated by porous layer and PET(polyethylene terephthalate) non-woven fabric is coated by hydrophilic polymer. These coated surfaces have porous structure, so that falling liquid film spreads widely on the coated surface foaming thin liquid film by capillary force. The temperature of liquid desiccant increases during dehumidification process by latent heat absorption, which leads to loss of dehumidification capacity. Liquid desiccant is cooled by cooling water flowing in plate heat exchanger. On the plate side, the liquid desiccant can be cooled by internal cooling. However the liquid desiccant on extended surface should be moved and cooled at heat exchanger surface. Optimal mixing and distribution of liquid desiccant between extended surface and plate heat exchanger surface is essential design parameter. The experiment has been conducted to verify effective surface treatment and distribution characteristics by measuring wall side flow rate and visualization test. It is observed that hydrophilic and porous layer coating have excellent wettedness, and the distribution can be regulated by adopting holes on extended surface.

• 한국표면공학회지
• /
• 제56권6호
• /
• pp.386-392
• /
• 2023

In this work, we describe the reduction kinetics of gold nanoparticles synthesized by plasma discharge in aqueous solutions with varied voltages and precursor (HAuCl₄) concentrations. The reduction rate of [AuCl₄]^- was determined by introducing NaBr to the gold colloidal solution synthesized by plasma discharge, serving as a catalyst in the reduction process. We observed that [AuCl₄]^- was completely reduced when its characteristic absorption peak at 380 nm disappeared, indicating the absence of [AuCl₄]^- for ligand exchange with NaBr. The reduction rate notably increased with the rise in discharge voltage, attributable to the intensified plasma generated by ionization and excitation, which in turn accelerated the reduction kinetics. Regarding precursor concentration, a lower concentration was found to retard the reduction reaction, significantly influencing the reduction kinetics due to the presence of active H⁺ and H radicals. Therefore, the production of strong plasma with high plasma density was observed to enhance the reduction kinetics, as evidenced by optical emission spectroscopy.

• 농업과학연구
• /
• 제17권1호
• /
• pp.45-51
• /
• 1990

본(本) 실험(實驗)은 동력경운기(動力耕耘機)에 탑재(搭載)되는 소형(小型)디젤기관(機關)의 냉각수(冷却水)의 적정량을 구명(究明)하기 위한 기초적(基礎的)인 실험(實驗)으로 냉각수(冷却水) 순환량(循環量) 15, 20, $25{\ell}/min$의 3수준(水準)으로, 변화(變化)시켰을 때의 기계손실(機械損失), 출력(出力), 연료소비율(燃料消費率), 토크, 냉각수흡열양(冷却水吸熱量), 열효율등(熱效率等)에 미치는 영향(影響)을 측정(測定) 분석(分析)한 결과(結果)는 다음과 같다. 1. 공시기(公試機)의 Motoring loss는 상용회전(常用回轉) 2,200rpm에서 1.371kW로 정격출력시(定格出力時)의 기계효율(機械效率)은 79.13%로 외국제품(外國製品)보다 약간(若干) 낮았다. 2. 냉각수(冷却水) 순환량(循環量)을 증가(增加)시킴에 따라 출력(出力)은 증가(增加)되는 경향(傾向)을 보였다. 3. 정격출력시(定格出力時) 연료소비율(燃料消費率)은 냉각수순환량(冷却水循環量) $20{\ell}/min$일때 282.93g/kW-h로서 가장 작게 나타났으며 이때 냉각수(冷却水)의 출구온도(出口溫度)는 $80.9^{\circ}C$이었다. 4. 냉각수(冷却水) 순환량(循環量)의 변화(變化)에 따른 토크의 변화(變化)는 거의 없었다. 5. 기관(機關)의 냉각수(冷却水) 흡열량(吸熱量)은 냉각수(冷却水) 순환량(循環量)의 증가(增加)에 따라 증가(增加)하는 경향(傾向)을 나타내었다. 6. 열효율(熱效率)은 냉각수(冷却水) 순환량(循環量) $20{\ell}/min$에서 32.31%로 가장 높게 나타났다.