• Title/Summary/Keyword: Heat Treatment Solution

Search Result 840, Processing Time 0.031 seconds

Influence of Temperature on Chloride Ion Diffusion of Concrete (콘크리트의 염화물이온 확산성상에 미치는 온도의 영향)

  • So, Hyoung-Seok;Choi, Seung-Hoon;Seo, Chung-Seok;Seo, Ki-Seog;So, Seung-Young
    • Journal of the Korea Concrete Institute
    • /
    • v.26 no.1
    • /
    • pp.71-78
    • /
    • 2014
  • The long term integrity of concrete cask is very important for spent nuclear fuel dry storage system. However, there are serious concerns about early deterioration of concrete cask from creaking and corrosion of reinforcing steel by chloride ion because the cask is usually located in seaside, expecially by combined deterioration such as chloride ion and heat, carbonation. This study is to investigate the relation between temperature and chloride ion diffusion of concrete. Immersion tests using 3.5% NaCl solution that were controlled in four level of temperature, i.e. 20, 40, 65, and $90^{\circ}C$, were conducted for four months. The chloride ion diffusion coefficient of concrete was predicted based on the results of profiles of Cl- ion concentration with the depth direction of concrete specimens using the method of potentiometric titration by $AgNO_3$. Test results indicate that the diffusion coefficient of chloride ion increases remarkably with increasing temperature, and there was a linear relation between the natural logarithm values of the diffusion coefficients and the reciprocal of the temperature from the Arrhenius plots. Activation energy of concrete in this study was about 46.6 (W/C = 40%), 41.7 (W/C = 50%), 30.7 (W/C = 60%) kJ/mol under a temperature of up to $90^{\circ}C$, and concrete with lower water-cement ratio has a tendency towards having higher temperature dependency.

Evaluation of Chemical Pre-treatment for the Optimization of CO2 Fixatiom Using by Carbonation Reaction with Serpentine (이산화탄소 광물고정화 효율 증가를 위한 사문석의 화학적 전처리에 관한 연구)

  • Jang, Na Hyung;Shim, Hyun Min;Hua, Xu Li;Kim, Hyung Teak
    • Applied Chemistry for Engineering
    • /
    • v.19 no.5
    • /
    • pp.526-532
    • /
    • 2008
  • The proposed $CO_2$ storage technology in the present study is a one-step sequestration process that stabilizes $CO_2$ in a reactor with Serpentine. The advantage of this technology is associated with its high stability of final product so that the entire system is recognized as permanent environment-friendly $CO_2$ removal method. Since the sequestration reaction mechanisms are generally understood that carbonation reaction proceeds with very slow rate, so that pretreatment method to increases reaction rate of $CO_2$ carbonation reaction should be developed. To increase the reactivity of Serpentine with $CO_2$, two different methods of pretreatment are carried out in the present investigation. One is heat-treatment, the other is chemical pretreatment. In this study, only chemical pretreatment is considered leaching method of magnesium from Serpentine using sulfuric acid at the various reaction temperatures, times, and acid concentrations. Experimental results illustrated that pretreatment by sulfuric acid increases surface area of serpentine from $11.1209m^2/g$ to $98.7903m^2/g$ and extracts magnesium compounds. Single variable experiment demonstrated the enhancements of magnesium extraction with increased reaction temperature and time. Amount of magnesium extraction is obtained by using the data of ICP-AES as maximum extraction condition of magnesium is 2 M acid solution, $75^{\circ}C$ and 1hr. After performing chemical pretreatment, carbonation yield increased from 23.24% to 46.30% of weight.

Estimation of Soil Cooling Load in the Root Zone of Greenhouses (온실내 근권부의 지중냉각부하 추정)

  • 남상운
    • Journal of Bio-Environment Control
    • /
    • v.11 no.4
    • /
    • pp.151-156
    • /
    • 2002
  • Root zone cooling, such as soil or nutrient solution cooling, is less expensive than air cooling in the whole greenhouse and is effective in promoting root activity, improving water absorption rate, decreasing plant temperature, and reducing high temperature stress. The heat transfer of a soil cooling system in a plastic greenhouse was analyzed to estimate cooling loads. The thermal conductivity of soil, calculated by measured heat fluxes in the soil, showed the positive correlation with the soil water content. It ranged from 0.83 to 0.96 W.m$^{[-10]}$ .$^{\circ}C$$^{[-10]}$ at 19 to 36% of soil water contents. As the indoor solar radiation increased, the temperature difference between soil surface and indoor air linearly increased. At 300 to 800 W.m$^{-2}$ of indoor solar radiations, the soil surface temperature rose from 3.5 to 7.$0^{\circ}C$ in bare ground and 1.0 to 2.5$^{\circ}C$ under the canopy. Cooling loads in the root zone soil were estimated with solar radiation, soil water content, and temperature difference between air and soil. At 300 to 600 W.m$^{-2}$ of indoor solar radiations and 20 to 40% of soil water contents,46 to 59 W.m$^{-2}$ of soil cooling loads are required to maintain the temperature difference of 1$0^{\circ}C$ between indoor air and root zone soil.

Predictive value of cobalt chloride solution for hypohidrosis with topiramate (약물 유발 소한증에서 cobalt chloride solution의 임상적 유용성)

  • Lee, Hyuk;Lee, Seung Hyun;Kim, Sun Jun
    • Clinical and Experimental Pediatrics
    • /
    • v.49 no.11
    • /
    • pp.1180-1185
    • /
    • 2006
  • Purpose : The aims of this study were to verify the incidence of hypohidrosis and to determine the predictive value of noninvasive indicator test ($Neurocheck^{TM}$) for sweating after administration of topiramate in newly diagnosed pediatric epileptic patients. Methods : A total of 46 epileptic patients (22 boys; 24 girls) on topiramate treatment were evaluated in this study at the Department of Pediatrics, Chonbuk National University Hospital, from October 2004 to July 2005. We measured sweating functions using a noninvasive sweating test ($Neurocheck^{TM}$) before topiramate medication, and after 3 months when topiramate reached its target dosage. We performed a direct questionnaire survey for the hypohidrosis related symptoms during topiramate treatment. Results : The mean age was $7.8{\pm}3.2year$. The mean dosage of topiramate was $4.5{\pm}0.8mg/kg/day$. Among the patients, there were 40 complex partial seizures, one simple partial seizure, two partial seizures with secondarily generalization, two generalized seizures, and one Lennox-Gastaut syndrome case. Of the 46 epileptic patients, 17 patients (37.0 percent) experienced hypohidrosis and hypohidrosis related symptoms, 12 (26.1 percent) had facial flushing, four (8.7 percent) had heat intolerance, one (2.2 percent) had lethargy, but no one had anhidrosis. Among the 17 patients, the mild group numbered 12 and the severe group totalled five. Hypohidrosis by $Neurocheck^{TM}$ was diagnosed in 16 patients. The overall measures of agreement between $Neurocheck^{TM}$ and the survey was 76.5 percent. The specificity of this test was 89.7 percent. Patients who showed a time delay after medication, especially over 3 minutes, were seen only in the severe group. Conclusion : $Neurocheck^{TM}$ could be clinically useful to detect and predict topiramate induced hypohidrosis in pediatric epileptic patients. We recommend that patients who show a delay over 3 minutes in $Neurocheck^{TM}$ test after topiramate initiation should be monitored for hypohydrosis.

Ni/Au Electroless Plating for Solder Bump Formation in Flip Chip (Flip Chip의 Solder Bump 형성을 위한 Ni/Au 무전해 도금 공정 연구)

  • Jo, Min-Gyo;O, Mu-Hyeong;Lee, Won-Hae;Park, Jong-Wan
    • Korean Journal of Materials Research
    • /
    • v.6 no.7
    • /
    • pp.700-708
    • /
    • 1996
  • Electroless plating technique was utilized to flip chip bonding to improve surface mount characteristics. Each step of plating procedure was studied in terms pf pH, plating temperature and plating time. Al patterned 4 inch Si wafers were used as substrstes and zincate was used as an activation solution. Heat treatment was carried out for all the specimens in the temperature range from room temperature to $400^{\circ}C$ for $30^{\circ}C$ minutes in a vacuum furnace. Homogeneous distribution of Zn particles of size was obtained by the zincate treatment with pH 13 ~ 13.5, solution concentration of 15 ~ 25% at room temperature. The plating rates for both Ni-P and Au electroless plating steps increased with increasing the plating temperature and pH. The main crystallization planes of the plated Au were found to be (111) a pH 7 and (200) and (111) at pH 9 independent of the annealing temperature.

  • PDF

Study on the Manufacturing techniques & Conservation of Iron Pot from Cheonmachong Ancient Tomb (천마총 출토 철부(鐵釜)의 제작기법 및 보존처리)

  • Lee, Seung Ryul;Shin, Yong Bi;Jung, Won Seob
    • Journal of Conservation Science
    • /
    • v.30 no.3
    • /
    • pp.263-275
    • /
    • 2014
  • It's shown how to proceed the study on Manufacturing techniques & Conservation to the Iron Pot from Cheonmachong Ancient Tomb(the 155th Tomb in Hwangnam-dong). In order to investigate manufacturing techniques of the Iron Pot, some parts of the relic were gathered. After mounting, polishing and etching on the relic, analyzing the metal microstructure was conducted. Also it's conducted a SEM-EDS analysis on the nonmetallic inclusion. White iron structure was observed in the metallurgical structure inspection, SEM-EDS analysis. It seems to be dried slowly at room temperature after casting, doesn't look as particular heat treatment to improve brittleness. It is estimated that it's as the handle seam side were verified about 3cm inch wide, 1.5 thick in center of body, so 2 separate half-completed products was cast with width-type mould. The manufacturing techniques Using white cast iron structure, width-type mould are observable to the Iron Pot excavated from Sikrichong Ancient Tomb & Hwangnamdaechong grand Ancient Tomb around those were constructed the same time. It's able to recognize that it's almost identical manufacturing techniques at that time. Conservation is generically following those are survey of pretreatment, foreign material removal, stabilization, restoration and color matching in the order. cleaning & drying were added to the process as occasion demands. The strengthening treatment were difficult with artifact's volume, low concentration Paraloid NAD-10 solution was spread two or three times with a brush, surface hardening also came up with 15wt% Paraloid NAD-10 solution after the conservation was complete. There were connection & restoration for the restoration to the damage after modeling forms that it's similar to damaged parts by using the Fiber Reinforced Plastic resins(POLYCOAT FH-245, mold laminated type). Throughout this research, capitalizing on accumulations of measurements about the production technique of Iron Pot in the time of the fifth and 6th centuries is no less important than the Iron artifact's conservation for a better study in the future.

Application of Carbonized Rice Hull as Growth Medium for Vegetable Crops in Polyethylene Film House - Effect of Mixing with Gravel and of a Different Kinds and Concentrations of Nutrition Solution on the Growth of Several Vegetable Crops - (채소작물(菜蔬作物)의 시설재배용(施設栽培用) 상토재료(床土材料)로서 왕겨훈탄(燻炭)의 활용(活用)에 관(關)한 연구(硏究) - 자갈의 혼합효과(混合効果)와 영양액(營養液)의 종류(種類) 및 농도(濃度)가 채소작물(菜蔬作物)의 생장(生長)에 미치는 영향(影響) -)

  • Hong, Soon-Dal
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.26 no.2
    • /
    • pp.93-102
    • /
    • 1993
  • Carbonized rice hull, neutralized by dilute nitric acid, was evaluated possibility as a bed matrial for sanitary cultivation. The growth response of Chinese Cabbage, lettuce, and spinach on the carbonized rice hull supplemented with different kinds and concentrations of available nutrition solution was accessed. The ideal nitrogen concentration of nutrition solution was 126 mg/l. Both solutions of compound fertilizer and nutrition containing microelements showed no difference in growth and chemical components of vegetables. Therefore, compound fertilizer was thought to be better than nutrition owing to the convenience of handling in practice. The gravel was also evaluated as supporting material of carbonized rice hull. Because of lasting latent heat in gravel, the mixing treatment of carbonized rice hull and gravel(7~10cm in diam.) was efficient to the growth resulting in the highest dry weight per plant, but the heavy weight of gravel made the handling very difficult. Light carbonized rice hull showed the better plant growth and ease handling, compared to the mixture of soil and compost, and had enough supporting capacity. Therefore, carbonized rice hull was thought to be a desirable bed material for environmentally controlled cultivation.

  • PDF

Luminescence Characterization of SrAl2O4:Ho3+ Green Phosphor Prepared by Spray Pyrolysis (분무열분해법으로 제조된 SrAl2O4:Ho3+ 녹색 형광체의 발광특성)

  • Jung, Kyeong Youl;Kim, Woo Hyun
    • Korean Chemical Engineering Research
    • /
    • v.53 no.5
    • /
    • pp.620-626
    • /
    • 2015
  • $Ho^{3+}$ doped $SrAl_2O_4$ upconversion phosphor powders were synthesized by spray pyrolysis, and the crystallographic properties and luminescence characteristics were examined by varying activator concentrations and heattreatment temperatures. The effect of organic additives on the crystal structure and luminescent properties was also investigated. $SrAl_2O_4:Ho^{3+}$ powders showed intensive green emission due to the $^5F_4/^5S_2{\rightarrow}^5I_8$ transition of $Ho^{3+}$. The optimal $Ho^{3+}$ concentration in order to achieve the highest luminescence was 0.1%. Over this concentration, emission intensities were largely diminished via a concentration quenching due to dipole-dipole interaction between activator ions. According to the dependence of emission intensity on the pumping power of a laser diode, it was clear that the upconversion of $SrAl_2O_4:Ho^{3+}$ occurred via the ground state absorption-excited state absorption processes involving two near-IR photons. Synthesized powders were monoclinic as a major phase, having some hexagonal phase. The increase of heat-treatment temperatures from $1000^{\circ}C$ to $1350^{\circ}C$ led to crystallinity enhancement of monoclinic phase, reducing hexagonal phase. The hexagonal phase, however, did not disappear even at $1350^{\circ}C$. When both citric acid (CA) and ethylene glycol (EG) were added to the spray solution, the resulting powders had pure monoclinic phase without forming hexagonal phase, and led to largely enhancement of crystallinity. Also, N,N-Dimethylformamide (DMF) addition to the spray solution containing both CA and EG made it possible to effectively reduce the surface area of $SrAl_2O_4:Ho^{3+}$ powders. Consequently, the $SrAl_2O_4:Ho^{3+}$ powders prepared by using the spray solution containing CA/EG/DMF mixture as the organic additives showed about 168% improved luminescence compared to the phosphor prepared without organic additives. It was concluded that both the increased crystallinity of high-purity monoclinic phase and the decrease of surface area were attributed to the large enhancement of upconversion luminescence.

Inhibitory Effect of Quercetin on the Expression of HSP70 Gene Induced by High Water Temperature in Tilapia (고수온에 의한 틸라피아 HSP70 유전자 발현과 Quercetin의 발현 억제 효과)

  • Kwon, Joon-Yeong;Kim, Su-Mi
    • Development and Reproduction
    • /
    • v.15 no.4
    • /
    • pp.365-371
    • /
    • 2011
  • Water temperature governs various biological events in many aquatic animals including fish. Temperature changes the rates of gametogenesis and development, in some cases, is even capable of reversing fish sex. Treatments of fish with unusually high temperature are known to induce the expression of HSP70 gene. Development of an effective inhibitor for HSP70 gene expression is, thus, crucial to study the role of HSP70 in the temperature sensitive biological events. We have investigated the inhibitory effect of quercetin, 3,3',4',5,7-pentahydroxyflavon, a natural flavonid, on the expressions of HSP70 gene induced by high temperature ($36^{\circ}C$) in the Nile tilapia, Oreochromis niloticus, larvae and juveniles (10~13 cm in total length). The expression of HSP 70 gene was significantly decreased in tilapia larvae immersed in 50 ${\mu}M$ or 100 ${\mu}M$ quercetin solution for 6 hours before the exposure to high temperature (P<0.05). In particular, the level of HSP70 expression in fish treated with 100 ${\mu}M$ was as low as that of fish without high temperature treatment. Juveniles of tilapia were individually injected with 0.1 $m{\ell}$ of either 0.5 mM, 5 mM or 20 mM of quercetin solution before the exposure to high temperature. As the results, the expression of HSP70 gene in the gonad and brain of juvenile fish was significantly inhibited by the injection of 0.5 mM quercetin solution (P<0.05), but not by higher concentrations. We report, for the first time in the fish, that quercetin effectively inhibits the expression of HSP70 gene induced by high temperature and 100 ${\mu}M$ for the immersion of larvae and 0.5 mM for the injection to juvenile can be used for the effective concentrations for the study of temperature sensitive biological events in tilapia.

Superovulation Response and Quality of Embryos Recovered from Cattle after a Single Subcutaneous Injection of FSH Dissolved in Polyethylene Glycol (PEG 융해 FSH 투여방법에 따른 소 과배란 유기 및 수정란이식 효율)

  • 최상용;최수호;박용수;조상래;강태영
    • Journal of Embryo Transfer
    • /
    • v.17 no.1
    • /
    • pp.67-77
    • /
    • 2002
  • This study was carried out to assess the effect of superovulation response and quality of embryos recovered from donor cows after a single subcutaneous injection of FSH dissolved in polyethylene glycol (PEG). Cows were allocated into control and 3 experimental treatment groups. In control, cows were injected intramuscularly 50 mg FSH twice daily for 4 days. Group 1 were injected subcutaneously with a single dose of 400 mg FSH dissolved in 30% PEG solution. Group 2 were injected subcutaneously with a single dose of 200 mg FSH dissolved in 30% PEG solution. Finally in group 3, cows were injected twice 200 mg FSH dissolved in 30% PEG solution by subcutaneous. Superovulation was initiated by injection of FSH between Day 8 and 14 of the estrus cycle (Day 0, the day of estrus), and followed by injection of 25 mg PGF$_2$$\alpha$ at 48 h after first FSH injection. Cows were then artificially inseminated (AI) with semen twice at 48 and 60 h after PGF$_2$$\alpha$ injection. At 7 days after the second AI, embryos collected non-surgically by flushing the uterine horns and were counted and compared morphologically as being transferable and degenerated among different superovulation treatments. Furthermore, progesterone and estradiol -17 $\beta$ in plasma were measured by radioimmunoassay following different treatments at given days All cows of treated groups were observed heat. but control group was showed 77.8%. Superovulation response was observed as 77.8, 87.5, 88.9, and 100% in control, Groups 1, 2 and 3 The mean number of corpus lutea (CL) detected in Group 1 were 19.6, which was, respectively significantly (P<0.05) higher than those of other groups (11.1, 13.4 and 7.6, respectively). However, there did not differ on the mean number of total embryos recovered and of transferable embryos between control and treated groups.