• Korean Journal of Food Science and Technology
• /
• v.17 no.6
• /
• pp.426-430
• /
• 1985

The effects of temperature on the visual color deterioration of Lithospermi radix were investigated under steady conditions of various pH and temperature. The changes of Hunter L, a, b, and ${\Delta}E$ values related to the color deterioration were sharply increased above $50^{\circ}C$ and the deteriorations were expressed linear relationships with the temperature above $60^{\circ}C$. Linear regression coefficients of Hunter L, a, b values decreased with an increase of heat treatment time, whereas the color difference was increased. The linear regression coefficients of Hunter L, a, b, ${\Delta}E$ values in 66.7% ethanol extract solution of Lithospermi radix for 1 hr were -0.3696, -0.4124, -0.2279, and 0.5983, respectively. Inear regression coefficients in color difference (${\Delta}E$) could be calculated from the coefficients in Hunter L, a, b values. The low pH treatment of extract from pH 6.07 to pH 1.35 led to decrease of Hunter a value and a little increase of Hunter L, b values, but the high pH treatment above pH 6.07 decreased all Hunter values. Particularly, the visual color of the extract of Lithospermiradix was appeared to be faborable at pH 4.0-6.5, which was a bright red color.

• Korean Journal of Materials Research
• /
• v.12 no.10
• /
• pp.771-775
• /
• 2002

$Gd_2$$O_3$:Eu phosphor particles with nano-sized and non-aggregation characteristics were prepared by spray pyrolysis using the spray solution containing polymeric precursor and $Li_2$$CO_3$ flux material. Nano-sized $Gd_2$$O_3$:Eu phosphor particles had higher brightness than the commercial $Y_2$$O_3$:Eu phosphor particles. The $Gd_2$$O_3$:Eu phosphor particles had nano-size and non-aggregation characteristics after heat-treatment at $1000^{\circ}C$ when the addition amount of $Li_2$$CO_3$ flux was 1 wt.% and 3 wt.%. The mean size of particles were 200 nm and 400 nm when the amount of flux was 1 wt.% and 3 wt.%, respectively. The prepared phosphor particles had higher photoluminescence intensity than that of the commercial product regardless of the content of$ Li_2$$CO_3$ flux and had the maximum brightness when the content of flux was 5 wt %. The photoluminescence intensity of the nano-sized $Gd_2$$O_3$:Eu phosphor particles containing 3 wt.% $Li_2$$CO_3$ flux was 125% in comparison with that of the micron-sized $Y_2$$O_3$:Eu commercial product.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.307.2-307.2
• /
• 2016

In this study, we synthesized Au nanoparticles (AuNPs) in polyacrylonitrile (PAN) thin films using a simple annealing process in the solid phase. The synthetic conditions were systematically controlled and optimized by varying the concentration of the Au salt solution and the annealing temperature. X-ray photoelectron spectroscopy (XPS) confirmed their chemical state, and transmission electron microscopy (TEM) verified the successful synthesis, size, and density of AuNPs. Au nanoparticles were generated from the thermal decomposition of the Au salt and stabilized during the cyclization of the PAN matrix. For actual device applications, previous synthetic techniques have required the synthesis of AuNPs in a liquid phase and an additional process to form the thin film layer, such as spin-coating, dip-coating, Langmuir-Blodgett, or high vacuum deposition. In contrast, our one-step synthesis could produce gold nanoparticles from the Au salt contained in a solid matrix with an easy heat treatment. The PAN:AuNPs composite was used as the charge trap layer of an organic nano-floating gate memory (ONFGM). The memory devices exhibited a high on/off ratio (over $10^6$), large hysteresis windows (76.7 V), and a stable endurance performance (>3000 cycles), indicating that our stabilized PAN:AuNPs composite film is a potential charge trap medium for next generation organic nano-floating gate memory transistors.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.7
• /
• pp.1051-1054
• /
• 2004

The structural transformation behavior of $Na_2Ti_3O_7$ by hydrolysis was investigated in mild and strong acidic aqueous medium. Compared with $K_2Ti_4O_9,\;Na_2Ti_3O_7$ exhibits quite different structural and morphological transformation behavior despite their similar layered structural characteristics. $TiO_2(B)$ obtained by heat treatment of $H_2Ti_3O_7\;at\;350^{\circ}C$ transforms to rutile $H_2Ti_3O_7\;at\;900^{\circ}C$. This temperature is much lower than $1200{\circ}C$, the temperature for anatase to rutile transition when $K_2Ti_4O_9$ is used as a starting titanate. A rectangular rod shape and size of $TiO_2(B)$ particles obtained from $Na_2Ti_3O_7$ is also different from a fibrous structure of $TiO_2(B)$ prepared using $K_2Ti_4O_9$. Rutile crystals of 100 nm diameter with a corn-like morphology and large surface area are directly obtained when the hydrolysis of $Na_2Ti_3O_7$ is carried out at $100^{\circ}C$ in a strong acid solution. The structure of starting titanates and the hydrolysis conditions are an important factor to decide the particle size and morphology of $TiO_2(B)\;and\;TiO_2$.

• Food Science and Preservation
• /
• v.11 no.3
• /
• pp.319-324
• /
• 2004

The antimicrobial activity of the extract of citrus peel prepared by the method of hot water, ethanol and sugar was examined. The results showed that the extract of citrus peel prepared by hot water or ethanol did not have antimicrobial activity, but the extract by 10$\%$(w/v) sugar revealed the high antimicrobial activity. Extracted in 10%(w/v) sugar solution for 9 days, showed the highest antimicrobial activity against 8 strains of bacteria. The minimum inhibition concentration was found to be 0.5$\%$(v/v) against S. aureus, 1.5$\%$(v/v) against B. subtilis, M. luteus and E. coli, and 2.0$\%$(v/v) against S. mutans. The antimicrobial activity of the citrus peel extract was stable regardless of the treatment at 40 $\~$ 100 $^{\circ}C$C for 20 min and unstable response to the change of pH. The results suggested the development of citrus peel as heat-stable antimicrobial agents.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.4
• /
• pp.143-149
• /
• 2020

Calcium phosphates recognized as important bio-materials have been successfully synthesized by simple precipitation using waste abalone shells, which are rich mineral sources of calcium. Calcium hydroxide (Ca(OH)₂) originated from abalone shells was used as calcium source (precursor) for the preparation. Synthesis of calcium phosphates was performed by reacting calcium hydroxide with phosphoric acid (H₃PO₄) in aqueous solution. The initial precursor Ca/P ratios were adjusted to 1.50, 1.59 and 1.67, and the effect of the composition and the heat treatment on the synthesized powders and sintered bodies was investigated. The phases of the sintered ceramics prepared at 1150℃ were hydroxyapatite (HAp), β-tricalcium phosphate (β-TCP), and biphasic phosphate (HAp with β-TCP)), which were determined by the initial precursor Ca/P ratios. The results demonstrate the possibility for the synthesis of high value-added calcium phosphates from economical starting materials with low cost and high availability.

• The Journal of Korean Academy of Prosthodontics
• /
• v.22 no.1
• /
• pp.95-108
• /
• 1984

Even though the tarnishing and corrosion problems characteristic with dental silver-palladium alloy are not yet fully solved, it is recently widely used because of its low cost. However the effects of major alloying elements on the various properties of this system are not fully understood. The object of this research is to clarify the effects of In and Zn additives on the corrosion and tarnishing resistances and precipitation hardening behavior of this sytem, using electrodynamic polarization, immersion, and Vicker's microhardness test and X-ray diffraction and electron probe micro analysis methods. The obtained results were as follows: I. As indium content is increased, both the corrosion resistance in Cl-solution and microhardness are also increased while the tarnishing resistance is decreased. 2. As Zinc content is increased, the corrosion resistance is decreased, but tarnishing resistance is increased 3. At 70Ag-25Pd-2.5Zn-2.5In composition, the precipitation harding behavior was mot significant. The optimum aging temperature was $450^{\circ}C$ and the time was 2 hrs. The resulting specimen of this work carried 180VHN. 4. Under the heat treatment, the changes in the mechanical property are due to the changes in the shape and composition of dendrite matrix, namely, it is because of the precipitation hardening behavior which has been proved by electron probe micro analysis and optical microscopic finding.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1767-1778
• /
• 2010

This study investigates applying $TiO_2$ (titanium dioxide) nanoparticles to polypropylene nonwoven fabrics via electrospinning for the development of UV-protective materials. To fabricate uniform nanocomposite fibers, three types of $TiO_2$ nanoparticles were applied: powder, colloid, and $TiO_2$ coated polymer pellets. $TiO_2$/polyurethane (PU) and $TiO_2$/poly(vinyl alcohol) (PVA) nanocomposite fibers were electrospun and the morphology was examined using a field-emission scanning electron microscope and a transmission electron microscope. Layered fabric systems with electrospun $TiO_2$ nanocomposite fiber webs were developed at various concentrations of $TiO_2$ in a range of the web area density. The effects of $TiO_2$ concentration and web area density on UV-protective properties were examined. When $TiO_2$ colloid was added into a PVA polymer solution, uniform nanocomposite fiber webs in which $TiO_2$ particles were evenly dispersed were produced. Water-soluble PVA nanofiber webs were given a heat treatment to stabilize the electrospun PVA fibrous structure against dissolution in water. $TiO_2$/PVA nanoeomposite fiber webs with 2wt% $TiO_2$ and 3.0g/$m^2$ web area density exhibited an ultraviolet protection factor of greater than 50, indicating excellent UV protection.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.2
• /
• pp.188-193
• /
• 2014

Seed viability testing provides valuable information for assessing seed lot germinability. However, most testing methods require destruction of seed prior to test. Because the dissected seeds for viability test cannot be used further evaluation, the nondestructively X-ray photography technique that can be applied for the evaluation of seed quality has been developed. In order to know the validity and accuracy of X-ray photography technique in seed evaluation test that conducted to remove the abnormal seed from a seed lot, we have compared the results from tetrazolium viability test, germination test and X-ray contrast method in cotton. Metallic salts treatment increased the efficiency of X-ray photographic method by enhancing the penetration of X-ray in abnormal or damaged seeds rather than normal seeds that have strong and well-organized tissues in seed. Cotton seeds presoaked for 16 hr in distilled water followed by soaking into metallic salt solution (5% NaI in water) for 60 min were easily classified seeds into dead seed and viable seed based on the radiography images obtained by X-ray radiation. We concluded that soft X-ray photography was reliable to find out the various defective characters due to heat and mechanical damage of seeds.

• Korean Journal of Food Science and Technology
• /
• v.37 no.3
• /
• pp.345-351
• /
• 2005

Physicochemical properties and functionalities of sodium caseinate, whey protein, skim milk, and whole milk with or without transglutaminase (TGase, 200 : 1) at $38^{\circ}C$ were determined. After crosslinking by TGase, whey protein was effective in improving heat stability compared to native protein at over $70^{\circ}C$. Whole milk was stable with lower turbidity compared to native solution. Whey protein showed low hydrolysis degree, fewer than sodium caseinate, during early activation time and increased slightly thereafter Emulsifying activities of sodium caseinate at pH 2 and 8, and whey protein at pH 7 and 8 improved. Emulsion stability of sodium caseinate improved at entire pH range studied. Foam expansion and foam stability of samples improved with TGase-treatment. Viscosities of TGase-treated samples were higher than those of untreated ones.