• 한국화재소방학회논문지
• /
• 제28권1호
• /
• pp.20-25
• /
• 2014

강구조 건축물의 기둥부재 내화성능은 접합부의 경계조건과 기둥부재의 길이에 따라 변화되지만, 내화성능 평가는 실험장비의 제약과 기술적 요인으로 인하여 힌지단과 3500 mm 길이 조건으로 이루어지고 있다. 그러나 실제 강구조물에 적용되는 기둥부재는 부지조건과 설계조건에 따라 다양한 경계조건과 길이의 변화를 가져올 수 있으며, 이에 대한 내화성능의 평가는 대상으로 고온 시의 재료특성과 해석적 이론을 바탕으로 고온 시 구조적 성능을 평가하여, 경계조건과 길이 변화에 따른 내화성능의 기본 자료를 도출하였다.

• 멤브레인
• /
• 제6권4호
• /
• pp.203-212
• /
• 1996

본 연구의 목적은 수용성고분자 PVA의 한외여과 실험을 통해 한계투과량(limiting flux) 현상에 미치는 조업변수들의 효과들을 고찰하고, 또한 겔층모델(gel-layer model)의 한계성을 극복하기 위해 열전달 계수의 개념을 도입한 Amiar 모델식을 바탕으로 새로운 모델식을 제시하여 이의 적용 가능성을 살펴보았다. Polysulfone 재질의 평판막(MWCO=20,000)과 중공사형막(MWCO= 30,000)을 사용하여 막내선속도, 투과압력, 온도, PVA 농도 등의 변화에 따른 한외여과 특성을 살펴보았다. 실험결과를 통해 polysulfone 재질의 막을 통해 PVA의 한외여과 과정은 겔층형성에 따른 투과저항 메커니즘이 작용하는 것으로 나타났다. 반면에 중공사형막의 경우는 한계투과량 조건하에서 겔층모델에 의해 예측할 수 없는 upward 한계투과량 현상이 관측되었다. 점성도 보정인자(viscosity correction factor)가 포함된 새로운 모델식의 적용을 통해서 upward 한계투과량 현상을 예측하였으나 완전히 만족할만한 결과를 얻지 못했다. 그러나 이와 같은 모델식의 적용을 통해서 PVA의 한외여과 과정이 투과용액의 점성도와 매우 밀접한 관계를 가짐을 알 수 있었다.

• 신재생에너지
• /
• 제18권4호
• /
• pp.12-21
• /
• 2022

The pyrolysis characteristics of high-density polyethylene (HDPE), low-density polyethylene (LDPE), and polypropylene (PP) were analyzed numerically using a 1D plug flow reactor (PFR) model. A lumped kinetic model was selected to simplify the pyrolysis products as wax, oil, and gas. The simulation was performed in the 400-600℃ range, and the plastic pyrolysis and product generation characteristics with respect to time were compared at various temperatures. It was found that plastic pyrolysis accelerates rapidly as the temperature rises. The amounts of the pyrolysis products wax and oil increase and then decrease with time, whereas the amount of gas produced increases continuously. In LDPE pyrolysis, the pyrolysis time was longer than that observed for other plastics at a specified temperature, and the amount of wax generated was the greatest. The maximum mass fraction of oil was obtained in the order of HDPE, PP, and LDPE at a specified temperature, and it decreased with temperature. Although the 1D model adopted in this study has a limitation in that it does not include material transport and heat transfer phenomena, the qualitative results presented herein could provide base data regarding various types of plastic pyrolysis to predict the product characteristics. These results can in turn be used when designing pyrolysis reactors.

• Korean Journal of Acupuncture
• /
• 제40권3호
• /
• pp.79-89
• /
• 2023

Objectives : The purpose of this study is to investigate various application methods of focused ultrasound and apply them to clinical use in Korean medicine. Methods : Search was performed using the search engines of electronic databases, including PubMed, ScienceDirect, Cumulative Index to Nursing and Allied Health Literature (CINAHL), ScienceON, Oriental Medicine Advanced Searching Integrated System (OASIS), China National Knowledge Infrastructure (CNKI), Wanfang Data, Japan Science Technology Information Aggregator, Electronic (J-STAGE) and Citation Information by NII (CiNii), from inception to July 2023 without language limitation. Inclusion criteria were clinical studies including randomized controlled trials (RCTs), and animal experimental studies related with focused ultrasound treatments for acupoints or meridian sinews. Results : Total 17 papers, 7 for RCT, 6 for in vivo animal studies, and other experimental studies, were finally selected. Indications used in studies were shoulder pain, back pain, chronic back pain, and degenerative knee arthritis. In experimental studies, studies on animal models of hypoxic ischemic brain damage and hyperlipidemia were also conducted. As for the acupoints, LR3, LI4, and ST36 were used in clinical studies and, in animal experimental studies, GV20, KI1, and ST36 were used. As for the dose, 4 studies below 3 W/cm² and 3 studies in the range of 0.625 to 5 W/cm² in clinical studies, and all studies did not exceed 5 W/cm². In animal experimental studies, 0.5 W/cm², 2 W/cm², 7.5 WW/cm², 15 W/cm², 10~20 W/cm² were used. In all three studies describing the penetration depth during irradiation, it was less than 1 cm. Conclusions : We suggest that focused ultrasound is an appropriate treatment tool for stimulating the acupoints to transfer heat energy. Future studies with rigorous and well-designed RCTs for various diseases will be required to ascertain the focused ultrasound stimulate acupoints or meridian sinews.