• Journal of Korea Foundry Society
• /
• v.27 no.4
• /
• pp.167-172
• /
• 2007

In the present study, the microstructural evolution and mechanical properties of $Al_{71.6}Ge_{28.4}$ eutectic alloy have been investigated. Stable (fcc ${\alpha}$-Al and diamond cubic ${\beta}$-Ge) and various metastable crystalline (monoclinic, rhombohedral) phases were produced by competitive phase selection during non-equilibrium processing methods i.e. melt spinning and injection casting. The as-injection casted samples containing metastable-equilibrium eutectic (${\alpha}$-Al + monoclinic) structure showed much higher strength than samples with equilibrium eutectic (${\alpha}-Al+{\beta}-Ge$) structure but plasticity disappointingly diminished. In order to endow the enhanced ductility without significant strength drop, the alloys was heat-treated at transition temperature from metastable phase to stable phase. The annealed specimen displayed the phase transformed microstructural evolution and enhanced macroscopic plasticity.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.111-114
• /
• 2005

In this the study, polyester/cotton(P/C) blended fabrics with fine denier were developed to get the light weight compared with the traditional P/C blended fabrics. Moreover, the width of the fabrics was extended by the tenter during the final heat treatment to get the lower fabric density and lighter weight. Then, the physical properties of these fabrics were analysed. The results were as the follows: The developed fabrics had 22.6-31.6% lighter weight than the traditional fabrics with the same fabric width. The weight of fabric decreased drastically with the fabrics width down to 67.1 $g/m^2$. The fabric density for the warp direction decreased with the fabric width. The tenacity and the elongation of the developed fabrics was little lower than that of the traditional fabrics. The air permeability of the developed fabrics increased with that of the traditional fabrics. The stretch rate of the developed fabrics decreased with increasing the fabric width. Residual stretch rate of the developed fabrics was more stable than that of the traditional fabrics. Residual stretch rate of the developed fabrics increased with the fabric width, but the highest value was less than 5% which is quit stable.

• Food Science and Biotechnology
• /
• v.16 no.4
• /
• pp.572-575
• /
• 2007

The angiontensin converting enzyme (ACE) inhibitory peptides were separated from beef sarcoplasmic protein extract and their amino acid sequences were identified as GFHI, DFHINQ, FHG, and GLSDGEWQ. The 4 peptides were synthesized in a laboratory and the ACE inhibitory activities of pep tides was measured after 2 months of storage at $4^{\circ}C$ under different pH conditions (6.0, 6.5, 7.0, 7.5, and 8.0) and the exposure of different temperatures (70, 80, 90, and $100^{\circ}C$) for 20 min to evaluate industrial use. No significant difference was detected by pH and temperature abuse for 20 min during storage. When the synthetic peptides were digested by pepsin, trypsin, and chymotrypsin, the ACE inhibitory activity was not changed. These results indicated that the 4 synthetic peptides with ACE inhibitory activity were pH-stable, heat-stable, and resistant to proteinases in gastro-intestinal tracts. Therefore, those 4 peptides can be used as a source for functional food product with various applications.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.6
• /
• pp.1105-1109
• /
• 1998

The superoxide dismutase(SOD) in peeled pericarp of cucumber was most stable at pH 8.0 and relatively stabe between pH 5.0 and 9.0. The enzyme was stable up to 6$0^{\circ}C$ and retained 12% by heat treatment at 10$0^{\circ}C$ for 5 min. At pH 2.0, the peeled pericarp enzyme activity was decreased to 10% by incubation for 3 hrs. However, the enzyme activity was increased above 25% after incubating the enzyme at pH 7.0 for 6 hrs. Retention of SOD activity in cucumber by various heating methods was also measured. The residual SOD activities of peeled pericarp and whole cucumber was estimated to be 25% and 27% after blanching(2 min), respectively. The skin enzyme retained 53% of its activity after steaming (3 min). When the peeled pericarp enzyme was incubated at 4$^{\circ}C$ for 20 days, the enzyme activity remained about 81%. However, when the enzyme incubated at 3$0^{\circ}C$ for 20 days, the peeled pericarp enzyme activity decreased to 17% of its original activity. The enzyme activity of peeled pericarp cucumber was not changed after exhaustive dialysis for 3 days, which indicated that the SOD activity in cucumber seems to have molecular weight above 12,000.

• Journal of the Korean Society of Combustion
• /
• v.14 no.4
• /
• pp.7-16
• /
• 2009

Porous metal plates (Metal fiber, muti-hole metal plate) using mainly in surface burner are known to have a corrosion and durability problem under high temperature condition. In this study, premixed flat flame with perforated ceramic tile of more durable cordierite material was examined with respect to combustion stability and emission. The flat premixed ceramic burner consists of perforated ceramic tile and various type of baffle plates to form stable surface flame. The results show that most stable flat flame is generated using baffle plate with open ratio of 0.193. In downward flat flame mode which is widely used in condensing boiler, CO is measured below 50ppm from equivalence ratio 0.755 to 0.765 and $NO_X$ is measured below 12ppm from equivalence ratio 0.75 to 0.79. It is also found that the range of blue flame in flame stability curve becomes wider with increasing heat capacity.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.48-49
• /
• 2006

Highly conductive and transparent films of Ga-doped ZnO have been prepared by pulsed laser deposition using a ZnO target with 3 wt% ${Ga_2}{O_3}$ dopant. Films with the resistivity as low as $3.3{\times}10^{-4}{\Omega}cm$ and the transmittance above 80 % at the wavelength of 400 to 800 nm can be fabricated on glass substrate at room temperature. It is shown that a stable resistivity for the use in oxidation ambient at high temperature can be obtained for the films. Heat treatments were performed to examine the thermal stability of ZnO and GZO films at ptemperature range from $100^{\circ}C$ to $400^{\circ}C$ in $O_2$ ambient for 30 minutes. The resistivity of ZnO film annealed at $400^{\circ}C$ increased by two orders of magnitude, in case of GZO film was relatively stable up to at $400^{\circ}C$. For practical applications at high temperatures the thermal stability of resistivity of GZO thin films might become an advantage for transparent electrodes.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1315-1320
• /
• 2012

In this study, piezoelectric AC-DC converter using ring-dot type multilayer piezoelectric transformer with no anisotropic of polarization was developed. Considering the characteristics of piezoelectric transformer which is very narrow operating frequency range, piezoelectric converter was designed with mixed structure of PFM driving method for feedback control of oscillation frequency and PWM driving method for output control. Maximum power and allowed current of the developed piezoelectric converter showing stable driving with minimum heat was 25W and 900mA, respectively. The output voltage of the piezoelectric converter was controlled by the driving oscillation frequency and showed stable and efficient operating characteristics at the maximum power.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2934-2939
• /
• 2008

We conducted a test of a direct burning of crude Jatropha oil (CJO) in a commercial boiler system. The fuel, crude Jatropha oil is not biodiesel which comes from transeterification process of bio oil, but it is pure plant oil. The higher heating value (HHV) of the CJO is 39.3 MJ/kg (9,380 kcal/kg) and is higher than that of a commercial heating oil, 37.9 MJ/kg. The kinematic viscosity of CJO is 36.2 mm2/s at $40^{\circ}C$ and 8.0 mm2/s at $100^{\circ}C$. The burner used in the test is a commercial burner for a commercial heatingoil and its capacity is 140 kW (120,000 kcal/h). We did a preliminary test whether the combustion is stable or not. The preliminary test was a kind of open air combustion test using the commercial burner with crude Jatropha oil. We found that the combustion can be stable if the crude Jatrophaoil temperature is higher than $90^{\circ}C$. We measured the flue gas concentration by using a gas analyzer. The NOx concentration is $80{\sim}100\;ppm$ and CO concentration is nearly 0 ppm at flue gas O2 concentration of 3.0 and 4.5%.

• Journal of Environmental Science International
• /
• v.1 no.1
• /
• pp.35-43
• /
• 1992

Handling the emergency problems such as Chemobyl accident require real time prediction of pollutants dispersion. One-point real time sounding at pollutant source and simple model including turbulent-radiation process are very important to predict dispersion at real time. The stability categories obtained by one-dimensional numerical model (including PBL dynamics and radiative process) are good agreement with observational data (Golder, 1972). Therefore, the meteorological parameters (thermal, moisture and momentum fluxes; sensible and latent heat; Monin-Obukhov length and bulk Richardson number; vertical diffusion coefficient and TKE; mixing height) calculated by this model will be useful to understand the structure of stable boundary layer and to handling the emergency problems such as dangerous gasses accident. Especially, this simple model has strong merit for practical dispersion models which require turbulence process but does not takes long time to real predictions. According to the results of this model, the urban area has stronger vertical dispersion and weaker horizontal dispersion than rural area during daytime in summer season. The maximum stability class of urban area and rural area are "A" and "B" at 14 LST, respectively. After 20 LST, both urban and rural area have weak vertical dispersion, but they have strong horizontal dispersion. Generally, the urban area have larger radius of horizontal dispersion than rural area. Considering the resolution and time consuming problems of three dimensional grid model, one-dimensional model with one-point real sounding have strong merit for practical dispersion model.al dispersion model.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.6
• /
• pp.561-565
• /
• 2007

Because of a good wear resistance and a stable contact resistance, Ag-CdO is widely used as electrical contact material. But, the Cd-oxide mainly exists as a coarse particle and adversely affected to environment. As a reason, $Ag-SnO_2$ alloy has been developed. The Sn-oxide maintains stable and fine particle even at high temperature. In order to investigate the effect of Misch metal (Mm) additional that affects the formation of the oxide and the formation of fine matrix Ag, we studied the microstructures and properties of Ag-Sn-In(-Mm) material fabricated by rapid solidification process. The experimental procedure were melting using high frequency induction, melt spinning, and internal oxidation. The Mm addition makes Ag matrix more fine than no Mm addition. The reason is that the addition of Misch metal decreased a latent heat of fusion of alloy, as a result the rapid solidification effect of alloy is increased. The maximum hardness shows at 0.3 wt%Mm. after that the hardness is decreased until 0.4 wt% Mm, but still larger than no Mm addition alloy. At 0.5 wt% Mm alloy, the precipitation of Misch metal causes a decrease of hardness than no Mm addition alloy.