• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.4
• /
• pp.2419-2425
• /
• 1971

In many cold weather concrete constructison jobs calcium chloride $CaCl_2$ can be used safely as an accelerating admixture. For producing satisfactory concrete during cold weather calcium chloride is used to develop the level of strength required in a shorter period by obtaining higher early strength, the resulting in crease in heat of hydration. In this paper, to get adequated data and information of the effect on strength of concrete in using calcium chloride as an accelerating admixture, Portland cement (Type I), High-early-strength cement(Type II) and Pozzolans cement with certain 1.5 percentage of calcium chloride by weight of the cement were tested. As the result of this experiment, followings were founded: 1. At the 1.5 percent of calcium chloride cement ratio, the early strength was accelerated to the highest level, and some 1.5 percent of calcium chloride cement ratio was suitable for the stabilization of the concrete structures. 2. For Some 50 percent of Water Cement ratio was suitable, making good Concrete in the Cold weather by admixture of Calicum Chloide. 3. The concrete of Pozzorans cement in early strength was weak but that in later rised by degree. 4. As abtaining higher early strength the curing period can be reduced, but the finishing work should be done as early as possible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.866-872
• /
• 2010

In this paper, we developed a digital soldering station based on PID controller, which supply stable power by controlling the current of heater of soldering iron. The proposed system designed PID controller to converge quickly to the set up temperature by user, and regain the lost of heat by external factors quickly. PID controller, designed by Ziegler-Nichols' tuning method, decides triac's trigger timing using setting temperature and present temperature to control the phase of AC 24V power that supply to the heater. Also, we give the function that shows present temperature and setting temperature of iron, and working time by graphic LCD. And during the rest time, we decided the power saving and extension of iron tip by dropping to the optimal temperature. Two experiments had implemented in $25^{\circ}C$ laboratory to confirm the performance of proposed method. The first experiment took 12sec, 13sec, 16sec, 18sec, reaching to $200^{\circ}C$, $300^{\circ}C$, $400^{\circ}C$, $480^{\circ}C$ respectively which result showed shorten of rising time than previous method. In the loading experiment of $300^{\circ}C$, $400^{\circ}C$, $480^{\circ}C$ steady state showed temperature drop of $3.8^{\circ}C$, $4.1^{\circ}C$, $4.5^{\circ}C$ which result showed the low temperature deviation than previous method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.971-978
• /
• 2012

Vacuum carburizing is supposed to be the superior process to the gas carburizing. However, the vacuum carburizing has the stage in which hydrocarbon gas is supplied into the furnace to be pyrolysis, and consequently the stable heat treatment is hard to achieve due to the soot from the hydrocarbon pyrolysis. Recently, many studies have been made which utilize acetylene gas to overcome this defects. In this paper, the carburizing and the diffusion periods have been selected based on the Harris experimental formula, and the mechanical properties of the vacuum carburized specimen have been compared with those of the gas carburized SCM415H specimen to identify the feasibility of the $CO_2$ free vacuum carburizing process. The result showed that the vacuum carburized materials used have no oxidization of the grain boundaries, and show the 29.8% higher effective hardness depth and the acceptable tensile strength.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.26 no.1
• /
• pp.10-18
• /
• 2012

In this paper, to find out how different the treatment of special individuals named 'old people' is with that of ordinary cases, Dongeuibogam(東醫寶鑑) was chosen as the study material and some parts in it where the symptoms of old people in the same disease category were treated in different ways were excerpted to analyze the tendency of pathological symptoms and prescriptions in the physiological perspective. As the result of analysis on the parts in Dongeuibogam(東醫寶鑑) where the old people were treated in different ways, it turned out that 65 prescriptions were used in 24 pathological symptoms. The 24 symptoms are included mainly in chapters of 'inner view(內景)' and 'outer form(外形)'. They are including the pathological symptoms which had been presented as general geriatric symptoms and also seems to have added other symptoms which should be clinically reflected in the specialty of treatment for geriatric diseases. The 65 prescriptions are also recorded mainly in chapters of 'inner view(內景)' and 'outer form(外形)'. The herbs used for them were sweet and warm herbs such as Rehmannia glutinosa (Gaertner) Libosch(熟地黃), Angelica gigas Nakai(當歸), Panax ginseng C. A. Mey(人蔘) and Atractylodes macrocephala Koidz(白朮) that can support the essence blood of liver and kidney and the energy of spleen, lung and stomach. Those herbs could be added or subtracted according to the symptom. It seems to have resulted from the treatment method that old people was applied to old people in consideration of their physiological features. When the 24 symptoms and 65 prescriptions for geriatric diseases different from ordinary ones in Dongeuibogam(東醫寶鑑) were considered in the physiological view point, it could be seen that each pathological symptom was manifested as a exhaustion of kidney qi(腎氣枯渴) which was a characteristic physiologic state of old people. Through this, it could be seen that the use of prescriptions was also made to mitigate the body fluid deficiency(津液不足), the kidney yin inner heat(腎陰內熱), the heart spirit void and loss(心神虛損), the kidney yang deficiency(腎陽不足), the spleen failing in transportation(脾失健運), the spleen yang deficiency(脾陽不足), the liver fire inner movement(肝火內動) and the lung energy void and loss(肺氣虛寒).

• The Journal of Korean Medical History
• /
• v.26 no.1
• /
• pp.41-53
• /
• 2013

In this paper, King Kyung-Jong's strange diseases which had been exacerbated by the Sinim-Sahwa(辛壬士禍) are researched and discussed. The subject will be described mostly based on health and medical records from "The Daily Records of Royal Secretariat of Chosun Dynasty(承政院日記)" and "The Annals of the Choson Dynasty(朝鮮王朝實錄)". Sinim-Sahwa had occurred for two years. It is thought that the beginning of it was 'a controversy on a proclamation of a crown prince, Yeon Ing Goon'. At the first year of Kyung-Jong's ruling, August 21, the No-Ron demanded a king's heir be decided as soon as possible, the king asked Yeon Ing Goon as his successor because of his 'strange diseases'. In October of the same year, the conflict between No-Ron and So-Ron parties reached its peak after a dispute about 'regency from behind the veil for the crown prince' at that time. Kyung-jong added that he had a mysterious and heavy disease and there was little hope to recover from it. Some opposing courtiers emphasized the king was in his good health and there weren't any actual diseases he suffered. But Kyung-Jong stubbornly persisted the diseases he had were so heavy that he couldn't get well readily. In detail, he announced his disease had so deeply rooted in internal organs that he could feel some kind of heat and fire arousal form his heart, then rage and resent soaring. Eventually, on 16th, the No-Ron party followed the king's demand, thus the king's health and illness condition itself was gradually getting off the subject. It seems that Kyung-jong's strange diseases was hwa-byung(火病). His symtoms are similar to the symtoms of hwa-byung. Environment he lived, was enough to cause hwa-byung. as a result, Sinim-Sahwa was the event what his hwa(火) was erupted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.27-33
• /
• 2016

Military textiles with breathable waterproof materials are expanding as form of winter clothes. Waterproof moisture-permeable clothes are very important for soldiers to survive in cold weather operations because they prevent loss of body heat from the penetration of water into the human body. Korea military uses the water resistance and moisture permeability to test the performance of waterproof moisture-permeable materials. Moisture permeability is measured according to the amount of evaporated water vapor passing through a fabric under specified temperature and humidity by using acetic acid potassium presented in KS K 0594. However, the test procedure for measuring the moisture permeability in the standard is presented only briefly and the preparation procedures for the test in accredited testing institutions are applied differently, leading to significant deviation of the results. This paper compares the procedures of testing institutions and examines the factors that affect moisture permeability. Finally, we propose a procedure to reduce the deviation of results and apply the proposed procedure in testing institutions. Our analysis results with one-way ANOVA under significant level (0.05) confirm that the deviation of results is reduced.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.1
• /
• pp.90-104
• /
• 2015

The purpose of this paper is to build a spatio-temporal evapotranspiration(ET) estimation model using Terra MODIS satellite image and by calibrating with the flux tower ET data from watershed. The fundamentals of spatial ET model, Surface Energy Balance Algorithm for Land(SEBAL) was adopted and modified to estimate the daily ET of Yongdam Dam watershed in South Korea. The daily Normalized Distribution Vegetation Index(NDVI), Albedo, and Land Surface Temperature(LST) from MODIS and the ground measured wind speed and solar radiation data were prepared for 2 years(2012-2013). The SEBAL was calibrated with the forest ET measured by Deokyusan flux tower in the study watershed. Among the model parameters, the important parameters were surface albedo, NDVI and surface roughness in order for momentum transport during calculation of sensible heat flux. As a result of the final calibration, the monthly averaged albedo and NDVI were used because the daily values showed big deviation with unrealistic change. The determination coefficient($R^2$) between SEBAL and flux data was 0.45. The spatial ET reflected the geographical characteristics showing the ET of lowland areas was higher than the highland ET.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.287-293
• /
• 2008

The collimator which makes a collimated beam, is an essential instrument for assembly and evaluation of telescopes. Recently, the Cassegrain type collimator has been widely used for its compact size as the focal length of high resolution cameras becomes longer. However, this kind of collimator has a disadvantage in that the secondary mirror is a heat source which can degrade the evaluation accuracy for an IR camera system. In this paper, we present the fabrication and measurement process for an off-axis parabolic mirror with the physical diameter pf 1 m, effective diameter 930 mm, and the focal length 6 m. After four months of works we obtained the final surface wave-front error of 30.4 nm rms ($\lambda$/138, ${\lambda}=4.2\;{\mu}m$), which is capable of evaluation of an IR camera as well as a visible camera.

• International Journal of High-Rise Buildings
• /
• v.10 no.4
• /
• pp.345-364
• /
• 2021

Developments in the understanding of fire behaviour for large open-plan spaces typical of tall buildings have been greatly outpaced by the rate at which these buildings are being constructed and their characteristics changed. Numerous high-profile fire-induced failures have highlighted the inadequacy of existing tools and standards for fire engineering when applied to highly-optimised modern tall buildings. With the continued increase in height and complexity of tall buildings, the risk to the occupants from fire-induced structural collapse increases, thus understanding the performance of complex structural systems under fire exposure is imperative. Therefore, an accurate representation of the design fire for open-plan compartments is required for the purposes of design. This will allow for knowledge-driven, quantifiable factors of safety to be used in the design of highly optimised modern tall buildings. In this paper, we review the state-of-the-art experimental research on large open-plan compartment fires from the past three decades. We have assimilated results collected from 37 large-scale compartment fire experiments of the open-plan type conducted from 1993 to 2019, covering a range of compartment and fuel characteristics. Spatial and temporal distributions of the heat fluxes imposed on compartment ceilings are estimated from the data. The complexity of the compartment fire dynamics is highlighted by the large differences in the data collected, which currently complicates the development of engineering tools based on physical models. Despite the large variability, this analysis shows that the orders of magnitude of the thermal exposure are defined by the ratio of flame spread and burnout front velocities (V_S / V_BO), which enables the grouping of open-plan compartment fires into three distinct modes of fire spread. Each mode is found to exhibit a characteristic order of magnitude and temporal distribution of thermal exposure. The results show that the magnitude of the thermal exposure for each mode are not consistent with existing performance-based design models, nevertheless, our analysis offers a new pathway for defining thermal exposure from realistic fire scenarios in large open-plan compartments.

• Korean Journal of Optics and Photonics
• /
• v.32 no.2
• /
• pp.49-54
• /
• 2021

In this paper, we design and construct the equipment to manufacture large-diameter optical fiber end caps, which are the core parts of high-power fiber lasers, and we fabricate large-diameter optical fiber end caps using the home-made equipment. This equipment consists of a CO2 laser as a fusion-splice heat source, a precision stage assembly for transferring the position of a large-diameter optical fiber and an end cap, and a vision system used for alignment when the fusion splice is interlocked with the stage assembly. The output of the laser source is interlocked with the stage assembly to control the output, and the equipment is manufactured to align the polarization axis of the large-diameter polarization-maintaining optical fiber with the vision system. Optical fiber end caps were manufactured by laser fusion splicing of a large-diameter polarization-maintaining optical fiber with a clad diameter of 400 ㎛ and an end cap of 10×5×2 ㎣ (W×D×H) using home-made equipment. Signal-light insertion loss, polarization extinction ratio, and beam quality M2 of the fabricated large-diameter optical fiber end caps were measured to be 0.6%, 16.7 dB, and 1.21, respectively.