• 대한기계학회논문집B
• /
• 제28권5호
• /
• pp.580-586
• /
• 2004

The ray effects of finite volume method (FVM) or discrete ordinate method (DOM) are known to show a non-physical oscillation in solution of radiative heat transfer on a boundary. This wiggling behavior is caused by the finite discretization of the continuous control angle. This article proposes a combined procedure of the Monte-Carlo and finite-volume method (CMCFVM) for solving radiative heat transfer in absorbing, emitting, and an-isotropically scattering medium with an isolated boundary heat source. To tackle the problem, which is especially pronounced in a medium with an isolated heat source, the CMCFVM is suggested here and successfully applied to a two-dimensional circular geometry.

• Journal of applied mathematics & informatics
• /
• 제42권3호
• /
• pp.607-623
• /
• 2024

This article studies the effects of heat generation/absorption and thermal radiation on the unsteady magnetohydrodynamic (MHD) Casson fluid flow past a vertical plate through rotating porous medium with constant temperature and mass diffusion. It is assumed that the plate temperature and concentration level are raised uniformly. For finding the exact solution, a set of non-dimensional partial differential equations is solved analytically using the Laplace transform technique. The influence of various non-dimensional parameters on the velocity are discussed, including the effects of the magnetic parameter M, heat generation/absorption Q, thermal radiation parameter R, Prandtl number Pr, Schmidt number Sc, permeability of porous medium parameter, Casson fluid parameter γ, on velocity, temperature, and concentration profiles, which are discussed through several figures. It is found that velocity, temperature, and concentration profiles in the case of heat generation parameter Q, Casson fluid parameter γ, thermal Grashof number Gr, mass Grashof number Gc, Permeability Porous medium parameter K, and time t have retarding effects. It is also seen that the magnetic field M, Thermal Radiation parameter R, Prandtl field Pr, Schmidt number Sc have reverse effects on it.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.708-720
• /
• 2020

Core-wide temperature distribution in sodium-cooled fast reactor plays a key role in its decay heat removal process, however the prediction for temperature distribution is quite complex due to the conjugate heat transfer between the assembly flow and the inter-wrapper flow. Hybrid medium model has been proposed for conjugate heat transfer modeling in the core. The core is modeled with a Realistic modeled inter-wrapper flow and hybrid medium modeled assembly flow. To validate present model, simulations for a three-assembly model were performed with Realistic modeling, traditional porous medium model and hybrid medium model, respectively. The influences of Uniform/Non-Uniform power distribution among assemblies and the Peclet number within the assembly flow have been considered. Compared to traditional porous medium model, present model shows a better agreement with in Realistic modeling prediction of the temperature distribution and the radial heat transfer between the inter-wrapper flow and the assembly flow.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1381-1389
• /
• 1988

본 연구에서는 앞서의 여러 경우에서 단순하게 취급 되었던 화염면과 연료표 면의 경계조건을 무한히 길고, 평행한 확산, 회색 평판(gray, diffuse plates)으로 보 고, 이 두 평판 사이에 흡수(absorbing), 방사(emitting), 산란(scattering)을 하는 회색매질(gray medium)이 차여져 있다고 생각한다. 이런 가정하 에서, 여러 매개변 수들을 변화시켜가며 전도, 대류, 복사열전달들의 상호작용과 온도 분포를 수치적으로 해석하였다. 특히 화염면과 연료표면간의 열교환에 있어서의 분출에 의한 효과와 복 사열전달의 영향에 관심을 기울였다.

• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1346-1354
• /
• 2002

The purpose of this work is to study the effects of specularly reflecting wall under the combined radiative and laminar free convective heat transfer in an infinite square duct. An absorbing and emitting gray medium is enclosed by the opaque and diffusely emitting walls. The walls may reflect diffusely or specularly. Boussinesq approximation is used for the buoyancy term. The radiative heat transfer is evaluated using the direct discrete ordinates method. The parameters under considerations are Rayleigh number, conduction to radiation parameter, optical thickness, wall emissivity and reflection mode. The differences caused by the reflection mode on the stream line, and temperature distribution and wall heat fluxes are studied. Some differences are observed for the categories mentioned above if the order of the conduction to radiation parameter is less than order of 10$\^$-3/ fer the range of Rayleigh number studied. The differences at the side wall heat flux distributions are observed as long as the medium is optically thin. As the top wall emissivity decreases, the differences between these two modes are increased. As the optical thickness decreases at the fixed wall emissivity, the differences also increase. The difference of the streamlines or the temperature contours is not as distinct as the side wall heat flux distributions. The specular reflection may alter the fluid motion.

• 한국식품영양과학회지
• /
• 제19권5호
• /
• pp.375-380
• /
• 1990

인삼의 약효성분인 saponin이 내염성효모 Sac-charomyces rouxii의 생육에 미치는 영향 및 고온처리로 stress를 준 효모의 증식회복속도에 미치는 영향을 조사하여 본결과 다음과 같은 결론을 얻을 수 있었다. 인삼saponin을 $10^{-3}%$ 되게 첨가했을 경우 무첨가구에 비해 S. rouxii의 생육을 55% 정도로 가장 크게 촉진시킬 수 있었으며 또한 인삼saponin 첨가 경우 S. rouxii의 증식곡선은 무첨가구에 비해 그 log phase의 진입속도가 훨씬 빨랐으며, 가열처리된 S. rouxii의 증식회복속도도 인삼saponin $10^{-3}%$ 첨가했을 경우 70% 정도나 빨랐다. 이로 미루어보아 인삼saponin은 heat shock 받은 효모의 생육회복속도를 크게 증가시킬 수 있는 항stress효과가 있음을 확인 할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제28권6호
• /
• pp.618-626
• /
• 2017

Conventional high temperature reformers are not suitable for hybrid fuel cell systems that use waste heat as a heat source. So, development of a low temperature type reformer is needed. However, the analysis was conducted in two ways to increase the thermal efficiency, because of low reforming rate due to the low heat source. First, it is a way to ger thermal gain from the outside through partial insulation. In the case of one heat source tube and several heat source tubes, we analyzed the effect of partial heat insulation in some cases. Second, we found the most efficient arrangement of the heat source tubes by changing the location of the heat source tubes. The interpretation was carred out using the COMSOL Mutiphysics program.

• 대한기계학회논문집
• /
• 제13권2호
• /
• pp.265-270
• /
• 1989

본 연구에서는 복사강도를 반구에 대하여 적분하여 비정상 미분방정식의 형태로 로 얻어지는 2-유속 회매질복사모델을 사용하여 복사전달방정식을 구성하고, 전술한 Yoshizawa 등의 가정을 배제하면서, 다공매질의 물리적 길이, 흡수계수 및 혼합기체의 당량비(equivalenceratio) 등을 변화시킴으로써 매질 내의 열적 구조를 분석하여 그들의 의 연구를 확장, 해석한다.

• 에너지공학
• /
• 제9권1호
• /
• pp.37-40
• /
• 2000

An inverse problem is solved to determine the space-dependent thermal conductivity in one-dimensinoal time-dependent heat conduction medium with the data imposed and measured at the two end-points. The thermal conductivity is approximated as a linear combination of known functions with unknown coefficients and the unknowns are obtained by the governing and sensitivity equations using modified Newton-Raphson method. The estimated results are compared with exact thermal conductivities and it shows good agreements. This approach is expected to be used to estimate spatial composition of heat conduction medium.

• 대한기계학회논문집
• /
• 제19권11호
• /
• pp.2995-3002
• /
• 1995

The cooling problem of the hot internal pipe flow has been investigated. Simultaneous conduction, convection, and radiation were considered with azimuthally varying convective heat loss at the pipe wall. A complex, nonlinear integro-differential radiative transfer equation was solved by the discrete ordinates method (or called S$_{N}$ method). The energy equation was solved by control volume based finite difference technique. A parametric study was performed by varying the conduction-to-radiation parameter, optical thickness, and scattering albedo. The results have shown that initially the radiatively active medium could be more efficiently cooled down compared with the cases otherwise. But even for the case with dominant radiation, as the medium temperature was lowered, the contribution of conduction became to exceed that of radiation.n.