• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.797-807
• /
• 2008

For this study, the semi-adiabatic temperature rising test is accomplished by using ternary system cement (OPC, BFS, FA) reducing temperature crack. Two tests are conducted; one is for the paste test, and the other is for the concrete test. As the results of paste tests, using fly ash is better to reduce hydration temperature than doing blast furnace slag. In the case of the paste mixed ternary system cement, the more fly ash is mixed and the less blast furnace slag is used, the lower the temperature is. The less the mixture ratio of blast furnace slag is and the more the mixture ratio of fly ash is, the later the temperature rising velocity and descending velocity are. Besides, the temperature is lower if water/binder ratio is high. The use of ternary system cement has the retardation effect of temperature rising because the time to reach the maximum temperature is in the order of OPC100, binary system cement, and ternary system cement. From the test, the maximum temperature of concrete used ternary system cement is $8{\sim}11^{\circ}C$ lower than that of concrete used OPC100. Moreover, temperatures rising velocity and descending velocity of ternary system cement range $47{\sim}51%$ and $37{\sim}42%$ compared with OPC100. The specimen of concrete shows remarkable low internal temperature and slow temperature rising velocity and descending velocity compared with the specimen of paste because it is that temperature loss of concrete is much more than paste specimen according to aggregates.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.6
• /
• pp.673-679
• /
• 1998

The experiment was conducted to determine in situ rumen degradability of soybean meal (SM), fish meal (FM), sesame cake (SC) and Italian ryegrass hay (IRGH) and the effect of supplementing the above protein meals to IRGH on digestibility and balance of nutrients in three Saanen goats. For measuring the degradability, nylon bags containing each meal were incubated in the rumen of one fistulated dry cow for 3, 6, 12, 24, 36, and 48 hrs. Degradability revealed that SM protein was highly degradable in the rumen (99.1%), while FM protein was less degradable (76.8%) with SC protein being intermediate (91.2%) at 48 hrs of incubation (p < 0.01). Degradation rate of the potentially degradable fraction was estimated to be 12.12, 5.88 and 5.88%/hr for SM, FM and SC, respectively. In the metabolism trial, all goats were offered daily 900 g IRGH and one of the supplements, SM (100 g), FM (75 g) or SC (100 g). Intake of DM, OM, CP and GE was similar among diets. However, digestibility of OM for SC diet was significantly lower than that for diets supplemented with FM and SM (p < 0.10). Nitrogen (N) excreted in faeces (p < 0.05) and in urine (p < 0.10) was, respectively, higher and lower for SC diet than that for the other two diets. The same tendency was observed in energy losses in faeces (p < 0.10) and in urine (p < 0.05). There was no difference in energy loss in methane or in heat production among diets. Consequently, no significant difference was observed in N retention (2.13, 0.42 and -0.11 g/day for FM, SC and SM diet, respectively) or in energy retention (-1.49, -2.14 and -2.70 MJ/day for FM, SM and SC diet, respectively). These results showed that protein supplements affected the digestion of diets based on grass hay with 7.45% CP in DM in goats, although there was no significant influence on N or energy retention.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.2
• /
• pp.346-351
• /
• 2003

The current studies investigated the therapeutic effects of Ephedra sinica Stapf (ES) herb-acupuncture on the inflammatory responses of rat arthritic joint, which was induced by the intradermal injection of heat-killed Mycobacterium tuberculosis emulsified in squalene to the base of the tail. The measurements of body weight and articular index were exploited as the assessment methods addressing arthritic symptoms, and the expression profiles of cytokines such as TNF-α, IL-1β and IL-6 in the rat joint were analyzed using RT-PCR. The articular indexes of arthritic rats were significantly restored after the treatment with ES herb-acupuncture. Although the clinical symptoms of arthritic rats were apparently alleviated by the ES treatments, their body weights were not recovered. It maybe due to the weight-loss and energy enhancement effects of ES extracts. The expression of TNF-α, IL-1β and IL-6 genes, which were highly stimulated in the knee joints of arthritic rats, were restored to the levels of normal rats after the ES treatment. The therapeutic effect of ES herb-acupuncture was not observed in ES-treated, non-acupoint arthritic group as a sham control. The ES herb-acupuncture into an acupoint ST36 was found to be effective in alleviating the arthritic symptoms in adjuvant-induced arthritis rats as regards the body weight, joint appearance and the expression profiles of inflammatory cytokines.

• Korean Journal of Food Science and Technology
• /
• v.28 no.2
• /
• pp.267-272
• /
• 1996

Effect of freezing of soybeans on instrumental and sensory textures of soybean curd was investigated. The hardness, gumminess and chewiness of soybean curd prepared with frozen soybeans were about three times as high as those prepared with unfrozen soybeans, while cohesiveness and elasticity were affected little by freezing. Sensory evaluation showed that freezing improved the quality of soybean curd. Instrumental and sensory textures of soybean curd prepared with frozen soybeans were excellent and almost same regardless of the boiling time when the soy slurry was boiled for 2.5 min or 5 min. However, the textures of soybean curd prepared with unfrozen soybeans were deteriorated by reducing the boiling time to 2.5 min. It was postulated that freezing facilitate the heat-denaturation of soyprotein to enhance aggregation of soy proteins and formation of cross-linkage between aggregate and $Ca^{++}$. Frozen soybeans resulted in soybean curd which lower fat content, while protein content of soybean curd was almost he same. Frozen soybeans gave a lower yield of soybean curd, which is supposed to be caused by the more fat loss during whey-off.

• Journal of Haehwa Medicine
• /
• v.13 no.2
• /
• pp.187-196
• /
• 2004

Now many sustitution and false articles is used in korea instead of shanyao. To use shanyao correctly, we will make a quilitative certificational plan of shanyao to investigate all of lieraturea, records and documents. And we could reach conclusions as folloews. 1) Source About a source of shanyao, though korea and china has a each other source, we think there is no problem in use of both. 2) Process In our country producing shanyao as medical use is a 'duanma', we can divide into peeling and non-peeling, drying at bulks and at briquets, steaming shanyao and fresh shanyao. Regardless of existence for peeling and steaming, a distributing shanyao is received a proper judgment. Like this result was expressed by insufficiency of standards about medical components or indicating components. We detected a reminding S02 more than 10 ppm. And this expresses that there ia a problum at a drying method. To suggest proper processing methods, a standard of quility will have to be made which the existence of peeling, difference of quility between 'changma' and 'duanma', drying method and exudation test with cutted thickness are adaptable. Besides, 'maoshanyao' and 'guangshanyao' of china is processed by various methods which decrease a medical effect such as too much soaking shanyao in water, steaming with a sulfur, too much peeling, So we must process shanyao like the next methods. (1) When harvesting, dig deeply not to cut off roots. (2) Not to peel, wash shanyao in a washing machine. (3) Dry to 50-60% degree at sunny place or drying machine. (4) To be easy for drying and exudation, cut off a thick piece with 5 mm (5) Dry perfectly at ding machine. 3) Quality3) Quality (1) Functional standards It is not Proper that 'guangshanyao' is used in china because it has a problem with quility on process of working, If they did not soak shanyao in water or heat with steam, it is the real situation that they cannot cutt off shanyao evenly. In conclusion, shanyao must be heavy, powdery with a perfectly non-peeling surface, section surface is yellow-white color, unequal and has no holes. (2) Physicochemical standards It is the real situation that we can not distinguish into quility of shanyao with established test because various workings which decrease medical effects is used. Therefore we suggest a testing standard of S02 which is used in bleaching. And testing standards relatived with decrease of medical effects must be established at once. It must that Dry on loss is less than 14.0%, content of ash is less than 6.0%. Content of acid-nonsoluble ash is less than 0.5%. Contens of heavy metal has to detect less than 30 ppm and there is no reminding agricultural medince.

• Clean Technology
• /
• v.24 no.4
• /
• pp.339-347
• /
• 2018

In order to cope with environmental problems and climate change caused by fossil fuels, renewable energy supply is increasing year by year. Currently, waste energy accounts for 60% of renewable energy production. However, waste has a lower calorific value than fossil fuels and contains various harmful substances, which causes serious problems when applied to power generation boilers. In particular, the chlorine in the waste fuel increases slagging and fouling of boiler heat exchangers, leading to a reduction in thermal efficiency and the main cause of high temperature corrosion, lowering facility operation rate and increasing operating cost. In this study, the high temperature corrosion experiments of superheater materials (ASME SA213/ASTM A213 T2, T12 and T22 alloy steel) by alkali chlorides were conducted, and their corrosion characteristics were analyzed by the weight loss method and SEM-EDS. Experiments show that the higher the temperature and chloride content, the more corrosion occurs, and KCl further corrodes the materials compared to NaCl under the same condition. In addition, the higher the chromium content of the material, the better the corrosion resistance to the alkali chlorides.

• Journal of Korea Foundry Society
• /
• v.43 no.6
• /
• pp.271-278
• /
• 2023

In the present study, A356 melt degassing experiments were conducted under various impeller rotation speed and inert gas flow rate conditions to determine changes in the melt temperature, composition and density during a degassing treatment. The melt temperature was found to decrease gradually as the degassing time increased, but a clear correlation between the impeller rotation speed or inert gas flow rate and the melt heat loss could not be confirmed. Regardless of the impeller rotation speed or inert gas flow rate, the Mg and Ti contents in the A356 melt scarcely changed, even after degassing for more than 10 minutes, while Sr contents decreased at the maximum degassing rate of 70 ppm. From a quantitative analysis of the degassing rate under each experimental condition based on the hydrogen concentration in the melt derived from the melt density and the degassing model equation, the inert gas flow rate was found to affect the degassing rate rather than the impeller rotation speed under the degassing operation condition employed in the present study.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.7
• /
• pp.879-884
• /
• 2009

Allium tuberosum Rotter (Liliaceae, Chinese chives) is a perennial herb of which leaves are used for food. This study investigated the effect of pretreatment on quality of dehydrated Chinese chives. Chinese chives was blanched at $80^{\circ}C$ for 20 sec, followed by drying at $70^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$, or drying at $100^{\circ}C$ for 30 min and subsequent drying at $70^{\circ}C$, or $100^{\circ}C$ for 60 min and subsequent drying at $70^{\circ}C$. Optimum drying temperature and time was $100^{\circ}C$ for 30 min and subsequent drying at $70^{\circ}C$, or $100^{\circ}C$ for 60 min and subsequent drying at $70^{\circ}C$. These conditions were shortened time for dehydration and showed smaller decrease than others in Hunter color L, a, b. Dehydrated Chinese chives showed a constant decrease in greenness with storage, probably due to destruction of chlorophyll by light. In the measurement of Hunter color L, a, b, these conditions showed smaller decrease than others in Hunter color for 15 week storage. Chlorophyll content and SOD (superoxide dismutase)-like activity in that condition was higher than others. It was assumed that a phenolic compound that forms its thermostable activity. The fitness of drying models was conducted in order to explain reducing chlorophyll loss and SOD (superoxide dismutase)-like activity loss. Based upon the chlorophyll content, SOD-like activity, and retention of green color of the vegetable, optimum drying conditions was $100^{\circ}C$ for 30 min followed by $100^{\circ}C$ for 30 min and subsequent drying at $70^{\circ}C$, or $100^{\circ}C$ for 60 min and subsequent drying at $70^{\circ}C$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.361-367
• /
• 1984

In previous paper(Lee et al., 1984), preparation formula and processing conditions of the fish meat (mackerel) paste using dielectric heating were described, that included the proper shape and size of product and the conditions of dielectric heating, hot air dehydration, and heating with electric heater to yield the minimum expansion and case hardening during heating and to controll the final rater activity of 0.86 to 0.83 accompanying with a complete reduction of viable cells and good texture. In present study, changes in VBN, pH, total plate count, water activity, texture, the loss of available lysine, color indexes, TBA value, and the content of TI were determined to assess the quality stability and shelf-life of the product during the storage for 35 days at $5^{\circ}C\;and\;25^{\circ}C$, respectively. And the effect of vacuum sealing and hot water treatment before storage on the storage stability of product was also mentioned. As the product was vacuum packed in K-flex film bag, heat treated in boiling water for 6 minutes, and stored, water activity was maintained 0.86 to 0.84 for 35 days regardless of storage temperature, and the increase of total plate count was negligible in case of $5^{\circ}C$ storage while tended to gain slightly after 25 days at $25^{\circ}C$ storage. Changes in VBN was also minimum with an increase of 1.5 mg/100g at $5^{\circ}C$ and 7.0mg/100g at $25^{\circ}C$, but in case of unpacked sample, it was 24.5mg/100g at $5^{\circ}C$ and 42.4 mg/100g at $25^{\circ}C$ even after 7 days. In textural property hardness tended to increase after 28 days and folding test score was down to A or B from AA grade. The loss of available lysine was $7.5\%\;at\;5^{\circ}C$ and $17.0\%\;at\;25^{\circ}C$ but brown color was not deeply developed as the color index score indicated. TBA value was not increased at $5^{\circ}C$ while it tended to increase rapidly after 30 days at $25^{\circ}C$. Changes in TI content was not obvious except that it showed a tendency of increase at the end of storage as well as in the change of lysine and TBA value. It is concluded from the results that the quality of the product, pasteurized and water activity controlled by dielectric heating, and vacuum packed in K-flex film would be stable for more than 35 days at $5^{\circ}C$ and at least 25 days even at room temperature.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.535-543
• /
• 2022

A CPFD (Computational particle fluid dynamics) model of solar fluidized bed receiver of silicon carbide (SiC: average d_p=123 ㎛) particles was established, and the model was verified by comparing the simulation and experimental results to analyze the effect of particle behavior on the performance of the receiver. The relationship between the heat-absorbing performance and the particles behavior in the receiver was analyzed by simulating their behavior near bed surface, which is difficult to access experimentally. The CPFD simulation results showed good agreement with the experimental values on the solids holdup and its standard deviation under experimental condition in bed and freeboard regions. The local solid holdups near the bed surface, where particles primarily absorb solar heat energy and transfer it to the inside of the bed, showed a non-uniform distribution with a relatively low value at the center related with the bubble behavior in the bed. The local solid holdup increased the axial and radial non-uniformity in the freeboard region with the gas velocity, which explains well that the increase in the RSD (Relative standard deviation) of pressure drop across the freeboard region is responsible for the loss of solar energy reflected by the entrained particles in the particle receiver. The simulation results of local gas and particle velocities with gas velocity confirmed that the local particle behavior in the fluidized bed are closely related to the bubble behavior characterized by the properties of the Geldart B particles. The temperature difference of the fluidizing gas passing through the receiver per irradiance (∆T/I_DNI) was highly correlated with the RSD of the pressure drop across the bed surface and the freeboard regions. The CPFD simulation results can be used to improve the performance of the particle receiver through local particle behavior analysis.