• 생물환경조절학회지
• /
• 제16권2호
• /
• pp.89-95
• /
• 2007

겨울철 난방연료가 많이 소모되는 대규모 연동형 온실의 보온성을 향상시키기 위해 터널용 보온자재로 많이 사용되는 다겹보온커튼을 이용하여 기존의 부직포, 알루미늄스크린 등과 보온성을 상대적으로 비교하였다. 또한 다겹보온자재는 보온성이 높으나 두께가 두꺼워 전동모터를 이용한 자동개폐장치를 구성하기 어려운 단점이 있으므로 연동형 온실에 적용할 수 있는 고장이 적고 작동이 원활한 커튼 개폐장치를 개발하여 작물재배 및 난방연료 절감효과를 검토하였다. 다겹보온자재와 부직포, 알루미늄스크린 등의 보온커튼용 자재의 열 관류량을 측정하여 상대적인 보온효과를 비교한 결과 부직포에 비해 알루미늄스크린의 열관류량이 적었고, 알루미늄 및 화학솜의 3겹보온자재와 다겹보온자재는 알루미늄스크린에 비해 열관류량이 각각 23.3%, 43.0% 적게 나타나 다겹보온자재의 보온성이 우수한 것으로 판단되었다. 다겹보온자재는 여러 겹으로 누빈 조합형 보온자재이므로 두께가 두껍고 화학솜, 폴리폼 등 연신되기 쉬운 자재를 이용하므로 장기간 사용시 커튼 개폐장치의 예인선이나 보온자재가 처지게 될 우려가 있으므로 예인식과 권취식 개폐방법을 동시에 적용하여 보온커튼 개페장치를 구성하였다. 시험용 온실 에 다겹보온커튼과 부직포커튼을 설치하고 풋고추를 재배한 결과 다겹보온커튼 설치 온실에서 풋고추의 생육이 유리하였고 초기수량도 27% 정도 증수되었으며, 경유온풍기의 난방연료 소모량은 46%정도 절감되었다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.32-37
• /
• 2009

An energy loss through the window system occupies about 10 to 30 percent on energy consumption of the whole building. That is the reason, several elements for a building composition of window system are the weakest from the heat. Insulation performance increases for the reducing heat loss. Heat transfer through the window system that is reducing heat transfer through conduction, convection and radiation. Insulation performance reinforcement methods classify improving heat specific quality of window system and improving efficiency of whole window system. The most application method among each methods is reducing emission ratio of the window system(Low-E glass), increasing a number of glazing(multiple window) and a method of vacuuming between glazing and glazing. Therefore this study is investigated a sort of glazing and specific character, U-value calculation with changing glazing thickness and calculation of temperature distribution and U-value with a glazing charging gas kind from double glazing. For a conclusion, an aspect of U-value figure at the smallest value case of vacuum glazing with Low-E coating. That means insulation efficiency is the best advantage during a building plan selecting vacuum glazing with Low-E coating for a energy saving aspect. In this way, U-value become different the number of glazing, coating whether or not and selecting injection gas. Therefore selecting of glazing is very important after due consideration by a characteristic and use of building and consideration of strong point and weak point.

• 한국건축시공학회지
• /
• 제16권6호
• /
• pp.529-534
• /
• 2016

칼슘실리케이트계 무기단열소재는 주원료로 시멘트를 90%를 사용하는 다공성 무기단열소재이다. 기존 무기단열소재와 달리 고온의 수화반응 처리가 없기 때문에 가격이 저렴하며, 불연소재의 원료를 사용하여 화제의 위험성도 적다. 칼슘실리케이트 단열소재는 $0.13g/cm^3$의 밀도와 0.050W/mK이하의 우수한 열전도도를 갖는 단열소재이다. 칼슘실리케이트 단열소재는 경량화 될수록 내부 기포를 다량 함유해야 하며 기포를 다량 함유함에 따라 단열성 또한 우수해진다. 본 연구에서는 다량의 기포를 함유하며 일정강도발현을 목표로, 칼슘실리케이트계 무기단열소재의 주성분인 시멘트가 수화반응에 따라 초기 및 장기강도발현하는 특성을 이용하여 칼슘실리케이트계 무기단열소재에 적용하여 물리적 특성을 알아보고자 하였다.

• 한국재난정보학회 논문집
• /
• 제20권2호
• /
• pp.419-429
• /
• 2024

연구목적: 소방용 배관 보온재의 불연성능 강화와 제연덕트 보온재의 내열성능 향상을 위해 AES소재 단열재의 성능을 시험을 통해 배관보온재 및 제연덕트 보온재에 적합성을 검증하고자 한다. 연구방법: AES 단열재에 대해 불연성능과 내열성능, 단열성능을 시험을 통해 검증한다. 연구결과: '건축물 마감재료의 난연성능 및 화재 확산 방지구조 기준'에 근거하여 불연성 및 가스 유해성 시험 결과 불연성능을 확인하였고, 내화성능 표준시험 결과 내화성능도 확인하였다. 또한, 건축용 단열시험으로 단열성능도 검증하였다. 결론: 본 연구에서 AES 계열 무기질 성분 단열재에 대한 성능시험으로 불연성능, 내화성능, 단열성능이 입증됨에 따라 건축물의 화재확산 방지성능을 개선하는데 좋은 대안이 될 것으로 사료된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.77-78
• /
• 2017

In this study, the effect of insulation curing for mass concrete wall according to thickness and curing period was evaluated by thermal analysis.

• Corrosion Science and Technology
• /
• 제15권6호
• /
• pp.320-325
• /
• 2016

To perform ultrasonic testing (UT) thickness measurement of the secondary side piping installed in nuclear power plants, the insulation for preventing heat loss should be removed. The type of insulation can be divided into fixed and removable insulation. Fixed and removable insulation have their own strengths and weaknesses. Removable insulation has been installed in the components susceptible to wall thinning caused by FAC and erosion from Shin-Kori unit 1, which commenced its commercial operation in 2011. In this paper, the number of repeated inspections of components and the number of replacements of fixed insulation were estimated and a more economical way was identified based on the manufacturing and installation costs for fixed and removable insulation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.445-446
• /
• 2010

본 연구는 최근 보편적으로 이루어지고 있는 한중콘크리트 시공에서 이중버블시트를 이용한 한중콘크리트 단열보온양생공법의 효용성 검증의 일환으로 이중버블시트에 물이 침투하였을 경우에 콘크리트의 온도이력과 강도특성을 분석하고자 하였다. 그 결과 시트내의 함수율 증가에 따른 영향은 거의 없는 것으로 분석되었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.199-202
• /
• 2007

COMS (Communication, Ocean and Meteorological Satellite) is a geostationary satellite and has been developing by KARI for communication, ocean observation and meteorological observation. Conventional thermal control design, using MLI (Multi Layer Insulation), OSR (Optical Solar Reflector), heater and heat pipe, is utilized. Ka-band components are installed on South wall, while other equipment for sensors are installed on the opposite side, North wall. High dissipating communication units are located on external (surface) heat pipe and are covered by internal insulation blankets to decouple them from the rest of the satellite. External satellite walls are covered by MLI or OSR for insulation from space and for rejection internal heat to space. The ocean and meteorological sensors are installed on optical benches on the top floor to decouple thermally from the satellite. Single solar array wing is adopted in order to secure clear field of view of radiant cooler of IR meteorological sensor. This paper presents principles of thermal control design for the COMS.

• KIEAE Journal
• /
• 제16권1호
• /
• pp.5-10
• /
• 2016

Purpose: The energy consumption in buildings has continuously increased in some countries and it reaches almost 25% of the total energy use in korea. Therefore there are various efforts to minimize energy consumption in buildings, and the regulations on building envelope insulation have been tightened up gradually. To satisfy the building regulation, the use of vacuum insulation panels(VIPs) is increasing. VIP is a high performance insulation materials, so that it can be thinner than conventional insulation material. When VIP is applied in a building, it may cause thermal bridge, which occurs due to very low thermal conductivity compared to other building materials and the envelope of VIPs. Method: This study designed the capsulized VIPs using conventional insulation for reduction of the thermal bridge. Then designed VIPs were applied to a wall. The linear thermal transmittance and the effective thermal conductivity were analyzed by HEAT2 simulation program for two dimensional steady-state heat transfer. The result compared with a wall with non-capsulized VIPs. Result: It analyzed that the wall with capsulized VIPs had lower linear thermal transmittance and reduced the difference of the effective thermal transmittance with one dimensional thermal transmittance compared to that of the wall with non-capsulized VIPs.

• 한국표면공학회지
• /
• 제48권2호
• /
• pp.33-37
• /
• 2015

High efficiency LED device is being concerned due to its high heat loss, and such heat loss will cause a shorter lifespan and lower efficiency. Since there is a demand for the materials that can release heat quickly into the external air, the organic insulating layer was required to be replaced with high thermal conductive materials such as metal or ceramics. Through anodizing the upper layer of Al, the Breakdown Voltage of 3kV was obtained by using an uniform thickness of $60{\mu}M$ aluminum oxide($Al_2O_3$) and was carried out to determine the optimum process conditions when thermal cracking does not occur. Two Ni layers were formed above the layer of $Al_2O_3$ by sputtering deposition and electroplating process, and saccharin was added for the purpose of minimizing the remain stress in electroplating process. The results presented that the 3-layer film including the Ni layer has an adhesive force of 10N and the thermal conductivity for heat dissipation is achieved by 150W/mK level, and leads to improvement about 7 times or above in thermal conductivity, as opposed to the organic insulation layer.