• 한국조경학회지
• /
• 제40권1호
• /
• pp.1-11
• /
• 2012

이 연구는 인간 에너지 균형 모델에서 출발한 인간 열환경 지수 분석 방법을 이용하여 캐나다 BC주에 있는 나나이모시 상업지구안 좁은 길과 경상남도 창원시 중심상업지구에 있는 소공원을 연구 대상지로 2009년 여름철 열환경을 분석한 것이다. 기후 입력 자료는 기온, 상대습도, 풍속, 태양 및 지구 복사에너지이었으며, 그 결과 인간 열환경 지수에 가장 크게 영향을 미치는 요소들은 태양 직사광선, 건물시계지수 그리고 풍속이었다. 음지는 약간 더운 정도의 열환경을 조성하는 것으로 나타나 매우 덥게 나타난 양지에 비해 훨씬 좋은 열환경을 조성하는 것으로 나타났다. 나나이모 연구 대상지에 있는 좁은 길들은 주변의 넓은 장소들에 비해 주변 건축물에서 나오는 태양 반사광선과 지구 복사에너지들이 더 많이 영향을 미쳐 훨씬 덥게 나타났다. 낮은 풍속에 의해서 인체에서 방출되는 현열과 잠열의 양이 현저히 줄어듦으로서 더 더운 열환경이 조성되는 것으로 나타났다. 기후요소를 조경에 접목하기 위해서, 인간 열환경 지수 분석 방법을 이용하는 것은 열환경적으로 쾌적한 옥외 공간조성에 영향을 미칠 것이며, 도시 열섬 완화와 기후변화 연구에도 잘 이용될 수 있을 것이다.

• 동력기계공학회지
• /
• 제10권2호
• /
• pp.36-40
• /
• 2006

In order to prevent the environmental pollution, the dryers are commonly used to treat sludge that one of sewages is polluting the quality of water. Generally, the drying method is various as to the property of material and use. Rotary dryer is a good apparatus to treat them. It is the way that is to make substance transmission and heat using hot air between sludge particle and heated gas. In this paper, we developed a 3-pass rotary dryer for a design program for the 3-pass rotary dryer with various conditions. The working conditions of dryer are a raw sludge feed rate, input & output water content and operation time etc.

• 한국태양에너지학회 논문집
• /
• 제21권3호
• /
• pp.9-18
• /
• 2001

This paper reports on an theoretical study of heat transfer from evaporative cooling system by the flow of recirculated water over the roof. In this system tile water is distributed at the top of the pitched roof, collected at the bottom by a gutter and recirculated by a pump. To analysis the system, the energy balance equations are developed and solved using a finite difference method. The calculation results show a good agreement with the measured ones obtained from our experiment. Based on the results, it was seen that the roof-evaporative cooling system reduced the heat flux significantly compared with the conventional roof structure even in the hot-humid summer climate of Korea.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1167-1174
• /
• 2004

The method to consider gravity effect on the performance of a condenser is developed, and a simple condenser having 'nU' type two circuits is analyzed. Each circuit has the same length and inlet air-side operational conditions. The only difference between two circuits is the direction of refrigerant flow, which is exactly opposite each other between the upper 'n' type circuit and the lower 'U' type circuit. It is shown that the gravity makes the distribution of refrigerant flow uneven in the two circuits at lower refrigerant flow rates; heat transfer rate also becomes uneven. Moreover, much of the refrigerant exists as liquid state in the circuit having low refrigerant flow rate, which will make the cycle balance unstable in the refrigeration cycle system like a heat pump.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권1호
• /
• pp.11-18
• /
• 2013

For a reliability assessment of machinery parts, accurate performance test, environmental test, life test, etc. are required on the sample. In the performance test conditions of various machinery parts, some problems happen such as needs to rise temperature rapidly with large flow of oil having very low thermal conductivity and to measure very high torque or tiny torque, etc. This study brings out the method to apply heat to rise temperature for large flow of oil without chemical change in a performance test of oil cooler. To measure large scale of torque in a performance test of planetary gearbox of excavator, the method of torque measurement is proposed by replacing the large torque meter priced very expensive. To measure very small torque on lubricated friction, a methode of force balance type test mechanism is introduced for tests of piston assembly.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.796-803
• /
• 2003

The discrete ordinates interpolation method (DOIM) has shown good accuracy and versatile applicability for the radiation $problems^{(1,2)}$. The DOIM is a nonconservative method in that the intensity and temperature are computed only at grid points without considering control volumes. However, when the DOIM is used together with a finite volume algorithm such as $SIMPLER^{(3)}$, intensities at the control surfaces need to be calculated. For this reason, a 'quadratic' and a 'decoration' schemes are proposed and examined. They are applied to two kinds of radiation problem in one-dimensional geometries. In one problem, the intensity and temperature are calculated while the radiative heat source is given, and in the other, the intensity and the radiative heat source are computed with a given temperature field. The quadratic and the decoration schemes show very successful results. The quadratic scheme gives especially accurate results so that further decoration may not be needed. It is recommended that the quadratic and the decoration schemes may be used together, or, one of them may be applied for control volume radiative energy balance.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제4권1호
• /
• pp.49-56
• /
• 2016

본 연구에서는 설계 인자가 지표수 열교환기 길이에 미치는 영향을 분석하였다. 또한 수직 밀폐형 지중열교환기와 지표수 열교환기를 같이 이용한다고 가정한 후, 지중 순환수의 온도 변화를 분석하였다. 지표수 열교환기 출구 온도와 연못 온도의 차이를 크게 하면, 열교환기 파이프 길이는 줄어들었다. 아울러 연못 온도가 높을수록 파이프 길이는 감소하지만, 파이프 바깥지름의 영향은 상대적으로 적었다. 또한 파이프 두께가 얇을수록 전도 열전달에서 열저항의 영향이 감소하기 때문에 파이프 길이는 감소하였다. 수직 밀폐형 시스템에 지표수 열교환기를 추가 적용하면, 지중열교환기 순환수 온도는 시간이 지날수록 감소하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.339-344
• /
• 2005

A PEMFC system model for FCEV was constructed and simulated numerically to examine the heat/water flow of the system and air/fuel humidification process for various operation conditions (ambient pressure /temperature/humidity, operating temperature, power load). We modeled PEMFC stack which can generate maximum electricity of about 80 kW. This stack consists of 400 unit cells and each unit cell has $250cm^2$ reacting area. Uniform current density and uniform operating voltage per each cell was assumed. The results show the flow characteristics of heat and water at each component of PEMFC system in macro-scale. The capacity shortage of the radiator occurred when the ambient was hot $(over\;40^{\circ}C)$ and power level was high (over 50 kW). In spite of some heat release by evaporation of water in stack, heat unbalance reached to 20kW approximately in such a severe operating condition. This heat unbalance could be recovered by auxiliary radiators or high speed cooling fan with additional cost. In cold environment, the capacity of radiator exceeded the net heat generation to be released, which may cause a problem to drop the operating temperature of stack. We dealt with this problem by regulating mass flow rate of coolant and radiator fan speed. Finally, water balance was not easily broken when we retrieved condensed and/or unused water.

• The Journal of Advanced Prosthodontics
• /
• 제7권2호
• /
• pp.93-97
• /
• 2015

PURPOSE. Xerostomia can diminish the quality of life, leads to changes in normal chemical composition of saliva and oral microbiata, and increases the risk for opportunistic infections, such as Candida albicans. Various artificial salivas have been considered for patients with xerostomia. However, the knowledge on the antifungal and antiadhesive activity of artificial saliva substitutes is limited. The aim of the present study was to evaluate influence of two artificial salivas on the adhesion of Candida albicans to the polymethylmethacrylate disc specimens. MATERIALS AND METHODS. Two commercial artificial salivas (Saliva Orthana and Biotene Oral Balance Gel) were selected. 45 polymethylmethacrylate disc specimens were prepared and randomly allocated into 3 groups; Saliva Orthana, Biotene-Oral Balance gel and distilled water. Specimens were stored in the artificial saliva or in the sterile distilled water for 60 minutes at $37^{\circ}C$. Then they were exposed to yeast suspensions including Candida albicans. Yeast cells were counted using ${\times}40$ magnification under a light microscope and data were analysed. RESULTS. Analysis of data indicated statistically significant difference in adhesion of Candida albicans among all experimental groups (P=.000). Findings indicated that Saliva Orthana had higher adhesion scores than the Biotene Oral Balance gel and distilled water (P<.05). CONCLUSION. In comparison of Saliva Orthana, the use of Biotene Oral Balance Gel including lysozyme, lactoferrin and peroxidase may be an appropriate treatment method to prevent of adhesion of Candida albicans and related infections in patients with xerostomia.

• 멤브레인
• /
• 제12권4호
• /
• pp.226-239
• /
• 2002

유기용매의 탈수화 공정의 거동을 예측할 수 있는 투과증발 판틀형 모듈에 대한 전산모사 모델을 확립하였는데 이는 공정의 분석 및 최적화의 도구로 사용할 수 있다. 확립한 모델은 물질, 열 및 농도 수지식으로 이루어졌으며 유한요소법의 수치해석을 사용하여 각 투과 특성들은 계산하였다. 본 전산모사에서는 모듈내 각 두개의 막 사이에 있는 단일 공급유로를 기본 미분단위부피로 사용함으로써 계산과정을 단순화하초 계산시간을 단축할 수가 있었다. 또한 모델식에 각 파라메타들을 실제 공정에서 직접 구하여 사용함으로써 공정모사의 정확성을 얻을 수가 있었다. 모사모델의 타당성을 화인하기 위해서 에탄올/물 혼합물을 모델 혼합물로 선정하여 상업 투과막인 $AzeoSep^{TM}$-2002를 통한 투과실험을 행하여 각 투과 특성들을 얻었으며 얻은 이들 값들과 모사 모델식으로부터 계산된 값들과 비교한 결과 서로 잘 일치함을 보여 본 모사모델의 타당성을 입증하였다. 또한 모사모델을 사용하여 연속식 및 회분식 투과공정에서의 에탄을 탈수 공정을 모사하였는데 모사 결과들은 공정 분석 및 최적화를 위한 기본자료로 활용할 수 있다. 본 연구에서는 모사결과를 토대로 회분식 공정과 연속식 공정을 비교 분석하였다.