• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.93-99
• /
• 1996

In order to investigate the extent of fixation of new water-borne preservatives in blocks of pinus densiflora sapwoods the streaming potential through the column with preservative treated wood was measured at various conditions. The rates of leachability of ingredients in the treated wood were estimated by the measurement of electric conductivity of the solution with the leached components. The solution was also analyzed by Atomic absorption spectrophotometer (AA). As a results, the experimental data indicated that the fixation of CCB, CCFZ and ACQ in wood were relatively unstable. The fixation rates of CCB, CCFZ were improved by increasing heat and drying time. The amounts of the leached ingredients were apparently higher in CCB and CCFZ than in CCA, while the rate of leaching of ACQ was not changed at various drying temperature.

• BMB Reports
• /
• 제28권3호
• /
• pp.238-242
• /
• 1995

The tadpole H-ferritin produced in E. coli was purified and its molecular properties were investigated to obtain information about the contribution of the H-subunit in the reaction of iron core formation. All the expressed subunits were assembled into complete holoprotein in vitro, presumably 24-mer, and the protein was heat-stable. Electron microscopy revealed that the recombinant ferritin forms spherically and contains iron core. No difference was observed in the absorption spectrum of the expressed protein compared to that of the natural ferritin. The Ouchterlony double diffusion of the expressed protein showed that the H-chain ferritin shares an antigenic determinant with natural tadpole ferritin. Rabbit anti-horse spleen ferritin discriminated the H-ferritin from natural ferritin. The rate of ferritin formation by the recombinant H-chain apoferritin was determined to be higher than that shown by natural tadpole ferritin, which consists of H, M and L-subunits. This phenomenon may be caused by the absence of M and L-subunits in the recombinant H-chain apoferritin.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.565-570
• /
• 2001

Annually, Taiwan generates approximately 2 million tons of inorganic wastes in the form of sludge, fly ash and slug. To increase the added value of waste and maintain the increasingly insufficient supply of natural gravel, large public construction projects account for this large demand each year. future architectural trends are leading towards high-rise buildings. In light of the above, Center for Environmental, Safety and Health Technology Development, Industrial Technology Research Institute has developed the technology of manufacturing cold-bonding, sintering and bloating types of lightweight aggregates with a specific gravity ranging between 0.7~1.7, water absorption rate < 30%. The lightweight aggregate verified by physical property tests can be used as a substitute for the natural aggregate, which generally appears in replacing gravel in concrete, soundproofing and heat insulation materials. Doing so would not only moderate waste disposal problems, but also achieve the goal of resource recovery.

• Journal of the Semiconductor & Display Technology
• /
• 제7권1호
• /
• pp.41-45
• /
• 2008

We studied the electrical characteristics of low-k SiOCR interlayer dielectric(ILD) films fabricated by plasma enhanced chemical vapor deposition (PECVD). The precursor bis-trimethylsilylmethane (BTMSM) was introduced into the reaction chamber with the various flow rates. The absorption intensities of Si-O-$CH_x$, bonding group and Si-$CH_x$, bonding group changed synchronously for the variation of precursor flow rate, but the intensity of Si-O-Si(C) responded asynchronously with the $CH_x$, combined bonds. The SiOCH films revealed ultra low dielectric constant around 2.1(1) and reduced further below 2.0 by heat treatments.

• Journal of the Korean Society of Safety
• /
• 제18권4호
• /
• pp.71-77
• /
• 2003

To inject fresh air into a fire room, Positive Pressure Ventilation (PPV) can be used and the blower of PPV increases inside pressure of the room. It makes high flow rate of products of combustion, smoke and heat from the structure, and it is very helpful to fireman on the fire extinguishing work. The flame moves to the direction of airflow and the temperature of flame can be decreased rapidly. In this experiment, a water mist system is applied to PPV to increase the effectiveness, and various effective factors are studied. n-Heptane and pine wood stick were used as fuel. Temperatures at the above and behind the combustion pan were strongly reduced by the water mist system and by the convective cooling with airflow. The smoke density was also decreased by PPV with water mist system and it can be explained by the absorption of smoke particles on the water mist droplet and by the strong exhausting effects of mobile fan.

• Journal of Sericultural and Entomological Science
• /
• 제41권3호
• /
• pp.205-210
• /
• 1999

Silk nonwoven fabrics are prepared by needle punching and thermal bonding with silk waste. To enhance the carding efficiency, the degumming rate was controlled with sodium hydrogen sulfite solution. The amount of the remained sericin was 3%(S-3), and 6%(S-6). Mixing wool and LMP(Low melting polyester) with the silk, to improve carding efficiency, was also effective. Following items were tested with prepared silk nonwovon fabrics : weight, thickness, compression, tensile strength, heat insulation, water absorption, and deodorization. The results show that the silk nonwoven fabrics could be used for apparels and new biomaterials.

• Journal of Welding and Joining
• /
• 제25권2호
• /
• pp.43-48
• /
• 2007

Laser Transmission Joining (LTJ) of plastics is a process in which light of suitable wavelength is transmitted through a transparent substrate that is in contact with an absorbing one. In this paper, LTJ is investigated by preliminary experiments from the viewpoint of mechanical engineering. To understand transmitting characteristics of each polymer substrate, transmission rate, reflection rate and absorption coefficient of polymer are measured by using a laser power-meter. Characteristics of joining in the spot welding and seam welding are investigated by measuring the fracture load. Fracture load increases in accordance to the laser power and irradiation time. However, when the laser power is over 60W and irradiation time over 4seconds, fracture load decreases. This phenomenon is probably due to heat-softening of materials. Besides, cavities are generated at a joint by evaporation of water molecules, which can be suppressed by introduction of a gap between two substrates.

• Resources Recycling
• /
• 제17권4호
• /
• pp.10-20
• /
• 2008

This study was intended to use an incinerated paper mill sludge ash as cement alternatives in order to derive a method of utilizing the incinerated paper mill sludge ash of low utilization rate in large quantities. Also, the utilization possibility of incinerated paper mill sludge ash as the cement alternative was examined by mixing a polypropylene fiber and cellulose fiber and by considering its control effect for shrinkage cracks caused by an increase of absorption rate and hydration heat, as a weakness shown at the alternation of incinerated paper mill sludge ash.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제7권2호
• /
• pp.99-106
• /
• 1987

Annealing were performed to investigate the behaviors of the residual stress remaining on the member of a steel structure. According to the fatigue test, the welding part has higher fatigue crack growth rate than the base metal part because the hardening of welding part reduce fracture toughness. However, the heat treatment decrease the hardness and increase the resistance to failure. Thus, the fatigue crack growth rate is improved and it reaches the minimum at $650^{\circ}C$. Elber' s equation includes the effect of the crack-close so that this equation provides a lower the fatigue crack growth rate than Paris-Erdogan' s equation, the Elber's curves show no significant difference to indentify the effect of the residual stress. The Pop loading along the crack length increases as the hardness goes higher. The heat treatment not only decrease the hardness, and the fatigue crack growth rate, but increase the absorption energy and fracture toughness on the member of a steel structure. As the result, the heat treatment produces the resistant ability to cracking which can reduce the degree of danger to failure.

• Journal of Practical Agriculture & Fisheries Research
• /
• 제26권1호
• /
• pp.16-21
• /
• 2024

Green manure crops have a variety of benefits, including improving soil fertility, removing soil salinity, enhancing soil aeration and moisture regulation, reducing the use of chemical fertilizers, reducing nitrous oxide emissions, reducing herbicide use through weed-suppressive effects, promoting agricultural ecosystem protection and carbon dioxide absorption capacity. To find ways to increase the germination rate of legumes and green manure crop seeds, which are imported in large quantities every year. It was carried out that two seed priming methods, osmotic priming and heat treatment, and compared their effects. Heat treatment was treated for 10 minutes at 40℃ or 60℃, followed by rinsing with water. Osmotic priming was applied for 30 seconds in a saline solution with a specific gravity of 1.13. Overall, there was no significant difference in the final germination rate, but it was found that osmotic priming and heat treatment affected the germination speed. However, applying heat treatment and osmotic priming simultaneously did not affect the germination characteristics. Therefore, it is suggested that heat treatment and osmotic priming can increase the germination speed of soybean and green manure crops.