• Journal of Environmental Health Sciences
• /
• v.41 no.3
• /
• pp.203-215
• /
• 2015

Objectives: This study was designed to evaluate the filtration efficiencies and pressure drops of five commercial cloth masks (4 plate type, 1 cup type) in comparison to the performance of a class 1 disposable respirator (reference respirator). A further objective was to evaluate the effects of the number of layers and wash treatment independently on filtration efficiencies and pressure drops. Methods: Polydisperse NaCl aerosols were generated in an aerosol chamber and their concentrations were measured by an optical particle counter (OPC) in the size range of $0.3{\sim}10{\mu}m$ (five channels). Results: The filtration efficiencies of the five cloth masks and the reference respirator were D: 9.5%, C: 18.5%, E: 23.6%, A: 28.5%, B: 29.7% and R: 91.1%, respectively, and the pressure drops through them were C, D: 0.8 Pa, E: 1.7 Pa, B: 6.4 Pa, A: 42.7 Pa and R: 19.3 Pa, respectively. The filtration efficiencies of the cloth masks and reference respirator were below the class 1 respirator criterion (${\geq}94.0%$) of the Ministry of Employment and Labor (MOEL) and Ministry of Food and Drug Safety (MFDS). The pressure drops satisfied the class 1 respirator criterion (${\leq}70Pa$) of MOEL and MFDS. When the cloth masks were folded into two and four layers, the filtration efficiencies of cloth masks A, B, C, D (plate type) increased 1.7-4.6 times, and 2.3-6.8 times, respectively, compared to the efficiencies of the same products in a single layer. Pressure drops increased as the number of layers was increased. The filtration efficiency of cloth mask E with a liner was 1.3 times higher than that of the same mask without a liner, and the pressure drop was lower in the no-liner configuration. After a single washing, the filtration efficiencies of all the cloth mask products decreased 1.04-4.0 times compared to those of the same products intact. For the cloth masks C and E, their filtration efficiencies were significantly decreased after washing (p<0.05). The pressure drops of all cloth masks were 1.2-2.0 times lower after washing. Conclusions: The filtration efficiencies of the five cloth masks were below 30% and did not improve greatly by increasing the number of layers. After a single washing, their performances decreased. Considering the above and other issues identified with cloth masks, such as poor fit and stretched fibers through use, people should not expect protection against particulate matters from the cloth masks on the market.

• Journal of Fashion Business
• /
• v.15 no.2
• /
• pp.107-119
• /
• 2011

The rate of disposable diaper usage has been increased continuously from convenience of disposable diapers and increment of women's entry in workforce. However, a new perspective toward disposable diapers has been come to the fore in various sides like babies' health, environment, and cost. Furthermore, cloth diaper has started to attract more attention. Since parents and grandparents pay more attention to children as birth rate dropped, they tend to purchase expensive goods if the quality or design of the goods is worthy enough. Therefore, this study has the purpose in presenting the basic data for developing functional and pleasant cloth diaper with analyzing the consuming patterns (convergence in nature, health and technology) and cloth diaper characteristics. The research on the actual condition about children cloth diapers and environmental-friendly materials is as follows. Firstly, as a result of analyzing pros and cons about disposable diapers and cloth diapers, the cloth diapers are estimated to have better health, environment, and cost factors than disposable diapers, only excluding convenience. Secondly, as a result of examining patent registered diapers, the disposable diapers have been improved from shape-centered development to well-being material development, and the cloth diapers have mainly developed functional shape-centered. Thirdly, as a result of analyzing children's goods made with environmental-friendly materials, the children's clothes already use organics and natural resources like beans, bamboo trees, ginkgo, and chitosan. Recently, the diaper industry starts to pay attention to environmental-friendly because the skin ailment from environmental pollution has been an issue. To conclude, children's cloth diaper should be appropriate to their body shape and optimized to have convenient form and functional materials. If environmental-friendly materials are used, quality, functionality, various demands from customers and vitalization of goods industry will be all satisfied.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.2
• /
• pp.115-122
• /
• 2017

Objectives: This study was designed to evaluate the changes in the particle filtration efficiencies of five cloth masks (4 plate types, 1 cup type) with an increasing number of machine washings and the degree of cloth expansion. Methods: NaCl aerosols were generated using an atomizer and passed through cloth masks in a dynamic aerosol chamber. Particle concentrations were measured both before and after for the cloth masks using an optical particle counter (OPC) in the size range of $0.3{\sim}10{\mu}m$. Results: In the original condition, the filtration efficiencies of the five cloth masks were A: 20.1%, B:30.9%, C: 25.0%, D: 26.5%, and E: 40.9%. As the number of washings increased in the order of one, two, and four times, the filtration efficiencies of cloth mask C increased. The filtration efficiency of A, D, and E increased after the first washing. With the exception of B, the filtration efficiency of cloth masks increased after the second washing and those of all cloth masks increased after the fourth washing. This might be caused by the fibers untangling from the yarn and being freed at one end. In this status, the packing density of the textile will not change, but the distances between fibers will increase, which might bring about an increase in filtration efficiency. When the cloth masks were extended by 10% and 20% in one direction, the filtration efficiencies of cloth masks B, D, and E decreased at 10% extension, and those of all cloth masks decreased at 20% extension. When the cloth masks were expanded by 10% and 20% in two directions, the filtration efficiencies of all cloth masks decreased by at least 34.7% at 10% extension, and by at least 60.9% at 20% extension Conclusions: The filtration efficiency of cloth masks could decrease after one to two machine washings, but will increase after four washings in comparison with their original performances. The filtration efficiency of cloth masks will decrease when they are expanded, such as when stretching over the nose during wearing status.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.2
• /
• pp.259-269
• /
• 2019

Objective: This study was conducted to prepare fundamental data and assess the relationship between level of exposure to airborne respirable dust, chest radiation findings, and the results of pulmonary function tests among workers in a cloth manufacturing factory. Methods: The number of total subjects was 144 (124 female and 20 male) workers in a cloth manufacturing factory in the city of Busan. This study measured the concentration of airborne respirable dust by gravimetric analysis and performed pulmonary function testing, and got chest radiation findings from December 1, 2016 to March 31, 2017. Collected data was analyzed using the IBM SPSS statistical package program (ver. 24.0). Results: The mean concentration of respirable dust was the highest in the cutting process. The effecting factors on $FEV_1/FVC$ were age, sex, and working process. The effecting factors on chest radiation findings were doing no exercise and concentration of respirable dust. Conclusions: Based on the above results, the authors consider there to be a need to secure sufficient working space and improve the engineering systems, for example the overall or local ventilation, in order to minimize the exposure to respirable dust. Health education and health promotion activities should also be improved in order to maintain optimal health status. The authors expect further studies to be performed on pulmonary function testing, chest radiation findings, and symptoms related to pulmonary function, including continuous observation, among workers in a cloth manufacturing factory.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.3
• /
• pp.41-50
• /
• 2013

This study aims to contribute to development of sanitary pad meeting customers' requirements by examining types, sorts, sizes and specifications of cloth sanitary pads currently sold in the market, and the results are as follows. First, with respect to materials of inside cloth of cloth sanitary pads, in most cases, 100% cotton knit was used as materials of the inside cloth and the pads were finished with knit cotton(including organic cotton) and woven cotton bias. Second, for the structures of the cloth sanitary pads, the Jacquard knits in the shape of beehive or waffle are mostly used. Third, the sizes of cloth sanitary pads were classified with 7 sorts were discovered that can be divided into liner, small-size, medium-size, large-size, overnight, extra overnight, accounting for the most percentage among cloth sanitary pads. Fourth, 11 sorts among cloth sanitary pads whose front and back shapes are the same were discovered, accounting for the most percentage. Fifth, cloth sanitary pads can be largely classified into a wing type, all-in-one type and insertion type, which includes subsidiary absorption layer. 9 sorts were wing types and all-in-one types, accounting for the most and percentage. Compared with the scope of the market for women's articles, there is no relevant study, so this study is expected to provide basic materials for women's articles and contribute to development of environment-friendly products as an alternative to a disposable sanitary pad which not only causes environment pollution but also has bad effects on women's health.

• Journal of Korean Academy of Nursing
• /
• v.41 no.2
• /
• pp.236-244
• /
• 2011

Purpose: In this study the impact of pro-environmental behavior, well-being oriented behavior, and use of cloth menstrual pads on dysmenorrhea in Korean female adults was examined according to the theory of reasoned action. Methods: A cross-sectional study was conducted with 195 Korean female adults. Data were collected from June to August, 2010 using self-report questionnaires. Data were analyzed using t-test, one-way ANOVA, Pearson correlation coefficients, multiple regression, and logit regression with STATA 10.0. Results: Pro-environmental behavior explained 48% of well-being oriented behavior. Well-being oriented behavior explained 10% of cloth pad use. Use of cloth pad explained 4% of dysmenorrhea and 5% of menstrual pain. The path through well-being oriented behavior had a significant effect from pro-environmental behavior to cloth pad use. Conclusion: Use of cloth pad was significantly related with well-being oriented behavior, pro-environmental behavior, social influence, dysmenorrhea, and menstrual pain. The results of this study suggest that pro-environmental strategies can help health care providers diminish clients' menstrual symptoms. Nursing intervention can support pro-environmental behavioral strategies.

• Journal of Fashion Business
• /
• v.20 no.6
• /
• pp.94-110
• /
• 2016

A necessity for infants, diapers are not only used over long durations, but are also in direct contact to the infants' skin, making the choice of diaper to be of utmost importance. Current interest in cloth diapers is rapidly increasing because of issues concerning the baby's health, green environment, and economy. However, previous researches on cloth diapers are limited to simply investigating the form and material of commercial cloth diapers. There are few in-depth researches for the optimal cloth diaper development. This is therefore a fundamental research for the development of optimized cloth diapers, and analyzes the difference in absorption depending on the placement of seam line (liner, darts, and I pattern), the locations of liquid spraying (1 cm and 8 cm ahead of the center), and the amount of liquid capacity (10 and 20 ml). Currently, the development of diaper patterns considers the crotch shape of the infants and the skin length deformation. As a result, in the case of the I-pattern, the horizontal seam line prevents water from spreading to the front and back, thus reducing the absorbed area. This result was more clearly visible when water was sprayed at the center. The effect of the seam line became more obvious when there was more water (20 ml); also, when water was sprayed at the center, more leakage was observed. Using the results of this research, implementation of horizontal seam is expected to prevent the upward spread of urine.

• The Research Journal of the Costume Culture
• /
• v.15 no.6
• /
• pp.1053-1062
• /
• 2007

This study purposed to restructure representative traditional patterns formatively, manufacture actual cultural products with traditional dyeing technique using persimmon, and commercialize the results of the research. Traditionally in Korea, the dying of natural fiber such as cotton, flax and silk with persimmon was called Galmul dyeing, and clothes made through Galmul dyeing were called Galot. Galot was very useful because it is strong, does not pick up dirt easily, dries easily, and is cool in summer. In addition, cloth dyed with persimmon becomes stiff, so it does not need to be starched or ironed after washing. Moreover, it does not transmit heat under direct rays and is highly air-permeable, so it is cool and useful for standing the heat. In this study, we used traditional persimmon dyeing technique, printing traditional patterns fit for contemporary people's aesthetic sense not through dip-dying but through printing. When persimmon dyeing is used in expressing patterns, it produces not only visual effect but also embossing effect due to the characteristic of persimmon that makes printed patterns stiff, so we can obtain unique texture distinguished from other printing methods. We chose seven motive patterns, which were lotus pattern symbolizing eternal life, peony pattern symbolizing wealth and rank and prosperity, character Su(壽) pattern widely used as a symbol of health, bird and cloud pattern in the Goryeo Dynasty, Sahapyeoeuisohwa(四合如意小花) pattern printed on brocade in the Goryeo Dynasty, lattice pattern, cloth pattern on wall paintings from the Period of the Three Kingdoms. From each pattern chosen as a motive was extracted unit patterns and the original pattern was restored using Adobe Illustrator. Restored patterns were restructured to be applied to cultural products fit for contemporary formative sense. Fabrics used in dyeing were cotton, linen, ramie, silk, and polyester. Although the same persimmon dyeing was applied, we produced different feelings of patterns using various fabrics and in some cases gold and silver powder was added for the effect of gloss in addition to the embossing of patterns. Using printed fabrics we manufactured tea pads, place mats, cushions, wrapping cloth for gifts, wallet, lampshades.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.1399-1402
• /
• 2005

본 논문은 여러 옷감 조각들을 이용하여 가상의 3차원 인체 모델에 옷을 입히기 위한 의복 시뮬레이션 시스템을 제안한다. 본 논문에서 의상 제작 과정에 사용한 방법은 2차원 옷감 조각을 디자인하는 과정과 옷감 조각을 재봉하고 여기에 제약점을 정하여 3차원 인체 모델에 의상을 입히는 과정으로 구성된다. 제안된 시스템은 3차원 인체 모델 파일과 2차원 재단 패턴 파일을 읽어 들인 다음 질량-스프링 모델에 기반한 물리적 시뮬레이션에 의해 의복을 착용한 3D 모델을 생성한다. 본 논문의 시스템은 사실적인 시뮬레이션을 위하여 인체 모델을 구성하는 삼각형과 의복을 구성하는 삼각형 사이의 충돌을 검사하고 반응 처리를 수행하였다. 인체를 구성하는 삼각형의 수가 매우 많으므로, 이러한 충돌 검사 및 반응 처리는 많은 시간을 필요로 한다. 이 문제를 해결하기 위하여, 본 논문에서는 Octree 공간 분할 기법을 이용하여 충돌 검사 및 반응 처리 수를 줄이는 방법을 이용하여 사실적인 영상을 생성할 수 있었고, 수초 이내에 가상 인체 모델에 의복을 입힐 수 있었다.

• Journal of Environmental Health Sciences
• /
• v.28 no.5
• /
• pp.4-12
• /
• 2002

It is well-known method to use Ethylene Oxide (ETO) as a fumigant to preserve cultural heritage from the attack of some bacteria and insects. In this article, we investigated co]or change of some cultural material upon treating ETO. The cultural material was selected from Korean paper (hanji), ancient books, blue prints, pigments (DA, DB, DC, DD, DE and DF). hemp cloths, and colored pictures (DG, DH, Dl, DJ, DK). The $\Delta$E value in chromaticity coordinates for each item was obtained upon treatment with ETO at concentration of 200, 250, 380, 500, 710 g/m$^3$ respectively. The $\Delta$E value was derived from the equation of L*at with the data checked 24 hr, 48 hr, and 72 hrs respectively. The Korean papers(hanji) showed slightly change in color by $\Delta$E 0.8. In the case of ancient books, it showed $\Delta$E 2.91 which was easily distinguishable with the naked eyes. For the almost 73％ of blue prints, the value of $\Delta$E was as much as more than 4.0 that it is recommended not to use. In the case of pigments, the value of $\Delta$E was ranged from 0.15 up to 4.0 so that it should be very careful before use. The hemp cloth dyed with natural indigo showed less than 1.00 in $\Delta$E, while various colored hemp cloth showed wide range of $\Delta$E from 1.00 to 4.00. Finally, from the fact that the color change was as small as less than 1.00 for the colored pictures, it is thought that treatment with ETO is one of method to be used to this purpose.