• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.443-444
• /
• 2006

The influence of the heat sources on LED junction temperature are Engine room air, Back plate, Electric power device, and so on. LED lamp cooling system is considered to be an important subject fur high light efficiency. Because LED Chip will be problem When LED junction temperature be over $135^{\circ}C$, In this Study, The Looped Heat Pipe System is considered to prevent LED Chip fall. The LHPS is consist of evaporator part, condenser part, heat pipe part. The working fluid of LHPS is HCFC-123. In this study, to prevent LED Chipfall, we study thermal characteristics for Looped Heat Pipe System with LED lamp.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.58-59
• /
• 2003

• 한국광학회지
• /
• 제24권5호
• /
• pp.231-236
• /
• 2013

본 논문에서는 멀티 어레이 엘이디를 이용한 불연속적인 광원의 빔 패턴이 광학계만으로 연속적인 매트릭스 빔으로 형성되어 광원의 점 소등만으로 다양한 빔 패턴을 구현할 수 있는 지능형 전조등의 광학 설계를 연구하였다. 기존 지능형 전조등의 기술과 다르게 멀티 어레이 엘이디를 이용한 지능형 전조등은 다수의 광원 엘이디와 하나의 광학계 어셈블리 모듈 구성으로 전자 제어를 통해 별도의 기구적인 작동 없이 빔 패턴을 변화시킬 수 있다. 본 연구에서 광학 설계는 상향등과 자동 조정 주행등의 패턴 구현과 광도 값을 만족시키기 위해 LED 앞 단에 2차렌즈 설계와 측벽 설계, 투사렌즈 설계를 실시하였다. 그 결과 불연속적인 광원의 패턴이 광학계를 통해 전방 25 m에서 14개의 동일한 사이즈와 밝기를 갖는 셀들이 모여 연속적인 하나의 매트릭스 빔 패턴을 형성하는 설계 조건을 만족하였다. 또한 설계된 광학계의 제작 및 측정을 통해 상향등의 원거리 시인성을 위한 최대 45000 cd 이상의 배광 법규 조건을 약 50000 cd로 만족하였고, 자동 조정 주행 빔 패턴 구현 시 광원의 소등 영역이 0.32 lx로 측정되어 배광 법규 0.4 lx 이하를 만족하였다.

• 한국결정성장학회지
• /
• 제30권2호
• /
• pp.73-77
• /
• 2020

본 연구에서는 차세대 자동차 레이저 헤드램프 적용을 위하여 분무건조법을 통하여 가넷 구조를 갖는 구형의 YAG : Ce 형광체를 합성하였으며 이를 기반으로 형광체 세라믹을 제조하고 광학적 특성을 분석하였다. 분무건조법 기반으로 합성된 구형의 YAG : Ce 형광체를 이용한 형광체 세라믹의 두께를 100 ㎛, 150 ㎛, 200 ㎛로 조절하여 두께에 따른 광변환 효율, 열 소광, 휘도 및 색온도의 광학적 특성을 비교하였다. 연구 결과, 양자효율 및 광속 값은 두께가 150 ㎛ 일 때, 가장 높게 나타났다. 본 연구 결과는 기존의 액상법을 기반으로 한 YAG : Ce 나노 형광체 제조의 고 비용, 저 수율 등의 문제점을 개선한 방법으로 향 후, 형광체 세라믹 제조에 큰 역할을 할 수 있을 것이라 기대된다.

• Tribology and Lubricants
• /
• 제35권1호
• /
• pp.59-64
• /
• 2019

When slipping occurs between two materials, the coefficients of friction must be considered because these values determine the overall efficiency of the machine or slip characteristics. Therefore, it is important to find the coefficient of friction between two materials. This paper focuses on obtaining the coefficient of friction between an aiming bolt and a retainer located in the headlamps of a vehicle. This bolt supports the headlamp, and if the bolt is loosened by external vibration, the angle of the light will change and block the vision of pedestrians or other drivers. In order to study these situations, the coefficient of friction between aiming bolts and retainers needs to be measured. In addition, the coefficient of friction of materials used in the headlamp should be obtained. To determine these two factors, a new device is designed for two cases: surface-surface contact and surface-line contact. To increase reliability of the results, the device is designed using an air-bearing stage which uses compressed air as lubricant to eliminate the friction of the stage itself. Experiments were carried out by applying various vertical forces, and the results show that the coefficient of friction can be measured consistently. The procedure for designing the device and the results are discussed.

• Transactions on Electrical and Electronic Materials
• /
• 제15권5호
• /
• pp.270-274
• /
• 2014

Currently, LED headlamps are only attached to newly manufactured vehicles, and it remains difficult to mount LED headlamps on used cars. Therefore LED headlamps need to be developed for used cars as a replacement of their halogen lamps. Due to a number of spatial limitations, it is critical to ensure a certain level of thermal performance. In order to obtain a design for efficient heat radiation, this paper aimed to optimize thermal management through a combination of heat sinks, heat pipes and fans. Based on such a design, this paper succeeded in developing LED headlamps of the desired performance to replace the halogen bulbs of used cars.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.69-72
• /
• 2000

This study proposes a new calculation method for generating real nighttime lamp-lit images. In order to improve the color appearance in the prediction of a nighttime lamp-lighted scene, the lamp-lit image is synthesized based on spectral distribution using the estimated local spectral distribution of the headlamps and the surface reflectance of every object. The principal component analysis method is introduced to estimate the surface color of an object, and the local spectral distribution of the headlamps is calculated based on the illuminance data and spectral distribution of the illuminating headlamps. HID and halogen lamps are utilized to create beam patterns and captured road scenes are used as background images to simulate actual headlamp-lit images on a monitor. As a result, the reproduced images presented a color appearance that was very close to a real nighttime road image illuminated by single and multiple headlamps.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 추계 학술대회논문집
• /
• pp.152-156
• /
• 2001

Three dimensional orthogonal grid generation is able to control effectively the grid spacing near the boundaries, but there are some difficulty to meshing complex geometry. The mesh complex geometry by orthogonal grid generation method must divide block of geometry It is required a careful skill, and long time. Its also difficulty to make unstructured mesh on complex geometry. Particularly, three dimensional geometry must have more time and effort. Recently, there have been growing interests in mesh generation of complex grometry, aslike an automobile headlamp, the heart. The method of easily meshing complex geometry is resarched to solve them. We suggest octree grid into one among these methods. As octrce grid is automaticaly adapted at the boundaries by determine the level operations to control the grid spacing near the boundaries are unnecessary. In this paper we showed throe dimensional mesh generation, and heat-flow analysis on the octree mesh.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.51-60
• /
• 2013

In this paper, to control the existing headlamp control system using steering wheel angle more efficiently and more actively, image processing algorithm which improved the detection rate of lane at night based on camera was suggested. And to recognize road lane more clearly in the conditions of low illumination, new algorithms were developed in the aspects of improving brightness, extracting clear lane edge and using the characteristics of lane. Through this research, it turned out that lane detection ability by using the normalized stretching, angular mask and expected-area scan have good performance in the night compare to existing algorithms.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.207-212
• /
• 2005

각종 규정에 정의되어있는 전조등의 성능과 시험 방법에 따라서 전방의 장해물 식별에 장애가 되지 않는 정도의 전조등 밝기 변화 허용치가 어느 정도로 될 것인지를 평가하기 위하여, 휘도 계수를 계산하고 이것을 사용하여 운전자의 순응휘도를 결정하였다. 그리고 운전자의 시인성 측정을 위한 시험실 설계를 하고 실험실 공사를 완료하였다. 향 후 운전자의 시인성 및 심리/생리적 측정을 통하여 전조등 밝기 변화에 대한 한계치를 규정할 것이다.