• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.4
• /
• pp.477-484
• /
• 2008

For the effective use of the conger eel by-products, such as head and frame, Tang, which is the Korean-type soup, from conger eel by-products (TCEB) was developed and its food component characterization was compared with that of commercial Chueotang, loach Tang. According to the results of viable cells and coliform group of TCEB heated at $115^{\circ}C$ for various times, the reasonable $F_0$ value was 8 min. The proximate composition of TCEB was 90.7% for the moisture, 4.8% for the protein, 2.6% for the lipid, and 1.5% for the ash. The extractive-nitrogen content of TCEB was 243.1 mg/100 g, which was higher than that of commercial Chueotang, 208.0 mg/100 g. The total amino acid content of TCEB was 4,310 mg/100 g and its major amino acids were glutamic acid (637.3 mg/100 g, 14.8%), glycine (409.1 mg/100 g, 9.5%) and alanine (404.4 mg/100 g, 9.3%). TCEB was not felt in the sensual fish odor and its sensual taste was good. The health functional properties for health of TCEB were 1.29 as a PF (protection factor) for antioxidative activity and 39.4% for angiotensin Ⅰ converting enzyme (ACE) inhibiting activity.

• Korean Journal of Poultry Science
• /
• v.20 no.4
• /
• pp.209-216
• /
• 1993

This study was conducted to classify Korean native chicken(KNC) and imported chicken by phenotypic performances and DNA fingerprinting. Two lines, KNC and White Leghorn(WL) , of chicken were maintained in the laboratory of Yeungnam University. Economic traits (body weight, sexual maturity, hen-day egg production, egg weight) and phenotypic characteristics (body-type, head, feather, shank) were checked. The DNA fingerprinting was analyzed for both breeds. The growth rate of the KNC was similar to WLS and sexual maturity of the KNC came later than WL. Hen-day egg production of the KNC was also slightly lower than the WL. The egg weight was about 10g lighter than WL. There was no difference in body weight of female KNC compared to the WL after 28 weeks. The study confirms difference between KNC and WL in DNA fingerprinting as well as its outlook. Thus, we suggest that these should be tested in nationwide districts about chickens known as the KNC using DNA fingerprinting. Then, the confirmed KNC populations should be maintained and used for the genetic improvement. Finally, only confirmed KNC should be in market which induce consumer to seek the KNC by its favorite.

• Journal of Chest Surgery
• /
• v.40 no.2 s.271
• /
• pp.136-139
• /
• 2007

Bilateral popliteal artery entrapment syndrome is a rare vascular disease, which leads to ischemic claudication as a result of disturbance to the blood flow from the abnormal relationship of the popliteal artery to the gastrocnemius muscle, a fibrous band or the popliteus muscle in the young male population. A 58-years-old male patient, complaining of ischemic claudication, coldness and 3rd toe gangrene of left leg of 1 month's duration was admitted to our institution. His left ankle-brachial index was decreased; therefore, a femoral artery angiography was peformed, which revealed a total occlusion below the distal superficial femoral artery of the left leg. An EKG revealed atrial fibrillation, suggestive of a thromboembolism of the popliteal artery due to atrial fibrillation; therefore, Urokinase thrombolysis was attempted. After the Urokinase thrombolysis, popliteal artery entrapment syndrome was diagnosed, with MRI then performed for an anatomical diagnosis. The popliteal artery entrapment was type 1, where the popliteal artery was displaced medial to the Gastrocnemius head. After complete removal of the popliteal artery aneurysm, interposition was performed with a contra lateral greater saphenous vein graft. A mild right popliteal artery aneurysm still remained, but surgery was not performed. Currently, the patent is surviving, without complications. Herein, the good results obtained for the surgical treatment of a severely affected leg, and the conservative treatment of a mildly affected leg, are reported.

• The Korean Nurse
• /
• v.33 no.1
• /
• pp.65-79
• /
• 1994

The purpose of this study was to describe the job retainment factors and the level of job satisfaction, and to identify the relationship between job retainment and the level of job satisfaction among the registered nurses working in hospitals. Four hundred eight registered nurses currently employed at 8 hospitals in Seoul were surveyed for the study. The 39 item, 5 point likert scale questionnare was developed by the researcher. The internal consistency of job satisfaction was. 86 and that of job retainment was. 90 in Cronbach's alpha test. The data sas collected from July 15 to July 30, 1993. The SPSS/PC+statistical program was used for data analysis. The descriptive analysis of the characteristics of the subjects, the level of job satisfaction and the job retainment factors was done. The relationship between the job satisfaction level and the job retainment factors was tested with. the Pearson Correlation Coefficient analysis, and thd differences of job retainment scores among the sample was tested with t-test and ANDVA. The results of the study were summarized. 1. The mean age of the subjects was 29.7 years, 41.7% of them were married. 71.1% of them were 3 years course graduates, 71.8% of them were staff nurses, and the mean duration of experience was 6 years. 2. The factors related to professionalism(3.43), society(3.31), and interpersonal relationship(3.29) were significant in job retainment. The maximum score was 5.0 Two other factors, personal(3.05) and organization(2.83) factors, also showed relatively high scores. 3. The factors to the job satisfaction showed similar pattern as job retainment: professionalism (3.47), society (3.33), finance(3.31), interpersonal relationship(3.02), and organization(2.72). 4. Society related factors(r=.7420, p<.00l) and professionalism(r=.7249, p<.00l) had high correlation with job retainment. Personal(r=.6372, p<.001) and organizational(r=.3597, p<.001) factors had moderate relationship to job retainment. Finance(r=.3597, p<.00l) had significant but weak relationship to job retainment. 5. Age, marital status, job position, departmental involvement, experience, and continuity of employment of the sample showed significant differences in job retainment. However, the period of job retainment, number of children, educational level, type of hospital, previous employment experience were not significant. 6. lndiviuals older than 40 years of age, who were married, who held the position of charge or head nurse position, who worked in central supply or nursing administration showed significantly high job retainment score. This research indicates that the professionalism is the most significant factor in job retainment. In order to retain more experienced nurses, it is important to improve the profesionalism among nurses.

• Journal of Korea Water Resources Association
• /
• v.52 no.10
• /
• pp.697-706
• /
• 2019

A multiphase flow modeling approach equipped with a hybrid turbulence modeling method is applied to compute the gravity currents in a rectangular channel. The present multiphase solver considers the dense fluid, the less-dense ambient fluid and the air above free surface as three phases with separate flow equations for each phase. The turbulent effect is simulated by the IDDES (improved delayed detach eddy simulation), a hybrid RANS/LES, approach which resolves the turbulent flow away from the wall in the LES mode and models the near wall flow in RANS mode on moderately fine computational meshes. The numerical results show that the present model can successfully reproduce the gravity currents in terms of the propagation speed of the current heads and the emergence of large-scale Kelvin-Helmholtz type interfacial billows and their three dimensional break down into smaller turbulent structures, even on the relatively coarse mesh for wall-modeled RANS computation with low-Reynolds number turbulence model. The present solutions reveal that the modeling approach can capture the large-scale three dimensional behaviors of gravity current head accompanied by the lobe-and-cleft instability at affordable computational resources, which is comparable to the LES results obtained on much fine meshes. It demonstrates that the multiphase modeling method using the hybrid turbulence model can be a promising engineering solver for predicting the physical behaviors of gravity currents in natural environmental configurations.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.429-437
• /
• 2018

In this study, the mixed toxicity of heavy metals (Cu, Pb, Hg) and surfactants (SLS, ALS) was evaluated by using Vibrio fischeri and Daphnia magna. The sensitivity of ecotoxicity to heavy metals was sensitive to daphnia but the case of surfactants were more sensitive to Vibrio fischeri. Experimental results of Vibrio fischeri show that the toxicity value P(O) was lower than the predicted value P(E), and the antagonistic effect was observed when the heavy metal and the surfactant were mixed. It seems that SLS and ALS, which are anionic surfactants, have anionic form on the hydrophilic head, so that they have an antagonistic effect that they are bonded with heavy metal ion which is a cation type and the actual toxicity is lowered. In Daphnia magna, the results showed that antagonistic, additive and synergistic effects were in order as concentrations increased. As the concentration increases, Daphnia magna, which is highly sensitive to heavy metals, seems to have a synergistic effect with a rapid increase in mortality.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.76-83
• /
• 2018

In order to prevent overusing the fishing gear and to reduce discarded fishing gear, there is a need for a technique that can efficiently transmit the information including the type and location of the fishing gear and the user's real name to the fishing boat and the control center using IoT-based communication. In order to do this, it is necessary to be able to confirm the position information of a plurality of buoys that can be identified by the base stations on the land. In this paper, in order to service the maritime IoT communication system, we calculate the link budget between the land base station and the targets on the sea to derive the service coverage. To design a marine IoT radio network for building a fishing gear monitoring system, we calculate link budget for wireless service optimization at sea for NB-IoT using 1.8 GHz frequency band and LoRa service using 900 MHz frequency band. In addition, the link budget between the land base station and buoy, the link budget between the land base station and fishing boat are calculated and the results are analyzed.

• Journal of the Korea Convergence Society
• /
• v.13 no.2
• /
• pp.177-183
• /
• 2022

This study investigated through eye tracking what gaze path the audience searches through portal sites (Naver, Daum, Zoom, and Nate). As a result of the layout analysis according to the gaze path of the search engine, the four main pages, which can be called to be the gateway to information search, appeared in the form of a Z-shaped layout. The news and search pages of each site use an F-shape, which means that when people's eyes move from top to right in an F-shape, they read while moving their eyes from left to right(LTR), which sequentially moves to the bottom. As a result of analyzing through the heat map, gaze plot, and cluster, which are the visual analysis indicators of eye tracking, the concentration of eyes on the photo and head copy was found the most in the heat map, and it can be said to be of high interest in the information. The flow of gaze flows downward from the top left to the right, and it can be seen that the cluster is most concentrated at the top of the portal site. The website designer should focus on improving the accessibility and readability of the information desired by the user in the layout design, and periodic interface changes are required by investigating and analyzing the tendencies and behavioral patterns of the main users.

• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.31-41
• /
• 2016

This study was conducted to develop a handy earth auger for use in sloppy and rugged forest terrains in order to reduce labor cost which comprises a major part of the production costs in forest afforestation projects. The first prototype is developed consist of two parts, the soil-digging screw and the battery power source. The specifications of the first prototype screw are: length of 170mm, a top diameter of 60mm, bottom diameter of 47mm, 23° angle for each helix, and a 50mm awl-head tip. The use of a single line of screw was selected for reduced weight. In addition, a power source of rotary DC Motor(WD-6G2425, WONILL, Korea) with a maximum torque of 30kgf-cm, rotation of 20-30rpm, K6G30C decelerator with a reduction ratio of 30:1 which could be used with no load for 48 was operated. In consideration of its weight, a lithium battery was utilized in line with the goal of developing a lightweight auger. In order to evaluate the performance of the first prototype, test sites were selected as 6 areas. The rotational force was found to be highest in area A(Solid area), followed by areas F(Mounted slope 40° area) and E(Mounted slope 30° area). It was also observed that in general, the rotational force increased along with the increase in soil depth with the maximum rotational force recorded at 10cm.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.216-225
• /
• 2023

This paper describes the finite element analysis and die design change of cold heading punching process to increase the cold forging tool life and reduce the tool wear and stress concentration. Through this study, the optimization of punch tool design has been studied by an analysis of tool stress and wear distribution to improve the tool life. Plastic deformation analysis was carried out in order to understand the cold heading process between tool and workpiece stress distribution. Cold heading punch die design was set up to each process with different four types analysis progressing, the cold heading punch dies shapes with combination of point angle and punch edge corner radius shapes of cold forging dies, punch die material properties and frictional coefficient. The design parameters of point angle and corner radius of punch die geometry, die material properties and frictional coefficient were selected to apply optimization with the DoE (design of experiment) and Taguchi method. DoE and Taguchi method was performed to optimize the cold heading punch die design parameters optimization for bolt head cold forging process, it was possible to expect an reduce the cold heading punch die wear to the 37 % compared with current using cold heading punch in the shop floor.