• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.738-743
• /
• 2004

In this paper, the crush characteristic of the tilting train express M-car was estimated under a head-on collision scenario. The car body was divided into three parts - front, middle, and rear. For each part, crush-force relation was evaluated numerically using LS-DYNA 3-diementional shell element analysis. This result will be used for one-dimensional collision analysis of the full train rake.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.327-330
• /
• 1996

We investigated the possibility of preventing a passenger's whiplash injury by rear-end collision. We sought to prevent the whiplash injury by appling an active headrest system to a passenger A main factor in whiplash injury is the backward, rapid, passive, and negative acceleration of the head. Our results showed that the active headrest system does reduce the backward, rapid, passive, and negative acceleration of the head. As a conclusion, Our active headrest system is a useful equipment to prevent whiplash injury.

• 대한토목학회논문집
• /
• 제31권3A호
• /
• pp.199-206
• /
• 2011

현재 국내에서 사용되고 있는 교량의 선박충돌력에 대한 설계기준은 Woisin의 실험으로부터 제안된 평균충돌력을 적용한 AASHTO LRFD에 기반을 두고 있다. 이러한 평균충돌력의 보수성을 평가하기 위하여, 본 연구에서는 비선형 유한요소해석을 토대로 선박의 질량-가속도의 관계, 선수의 변형-운동에너지의 관계를 이용하여 선수충돌시 발생하는 평균충돌력을 산정하고 이를 AASHTO 설계기준과 비교하였다. 그 결과, 선박의 크기에 따른 평균충돌력의 변화는 해석에서 얻어진 평균충돌력에 비해 매우 보수적이지만 경향은 일치하는 것으로 나타났다. 그러나 속도에 따른 평균충돌력의 변화는 충돌속도에 비례하는 설계기준의 값과는 달리 선수의 소성거동에 지배를 받는 것으로 나타났다.

• 수산해양기술연구
• /
• 제19권2호
• /
• pp.99-105
• /
• 1983

현행 국제해상충돌방지규칙 제14조의 마주치는 상태의 항법에서 피항선들이 피항동작을 취할 시기의 기준이 되는 피항개시거리를 선체운동학적으로 해석산출하기 위하여, 수척의 대소형 선작의 실선시험에서 구한 조종성지수를 이용하여 피항개시거리를 산출하고 이를 검토고찰하였다. 그 결과를 요약하면 다음과 같다. 1. 2척의 동력선이 충돌의 위험이 내포되도록 정면 또는 거의 정면으로 마주치는 경우 변계만으로 피항동작을 취할 때 최소피항개시거리는 자선 길이의 약 5배이다. 2. 2척의 동력선이 충돌의 위험이 내포되도록 정면 또는 거의 정면으로 마주치는 경우 피항동작을 취할 안전피항개시거리는 자선 길이의 약 10배이다. 3. 특정한 선형에 대하여는 본 연구에서의 계산법에 의한 최소피항개시거리와 안전피항개시거리를 산출하여 두면 감각에 의한 조선방법으로 야기되는 충돌해난사고를 지양할 수 있으리라 생각된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.646-651
• /
• 2004

Crashworthy design of a train is a systematic approach to ensure the safety of passengers and crews in railway transportation for the prescribed accident scenarios. This approach needs new structural arrangements and designs to absorb higher levels of impact energy in a controlled manner and interior designs to minimize passenger injuries. In this paper, crashworthy design approach is applied to the tilting train express (TIX) design which is newly being developed. Based on a head-on collision and a level crossing collision scenarios, the crash behaviors of a TTX design candidate arc evaluated numerically using the finite element method. Finally, design alternatives which show better crashworthy performances are proposed and verified through the full-rake collision simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2063-2065
• /
• 2003

The control rod drive mechanisms in a reactor head are arranged too narrow for a human worker to approach. Moreover, the working environment is in high radiation area. In order to inspect defections in the surfaces of the reactor head and welding parts, a visual inspection device that can approach such a narrow and high radiation area is required. This paper introduces a tele-operated mobile robot for visual inspection of a reactor head, which has pan/tilt camera, fixed rear camera, ultrasonic collision detection system, and so on. Moreover, the host controller and digital video logging system are developed and integrated control software is also developed. The robot is operated by a wireless control, which gives flexibility for the inspection.

• 한국자동차공학회논문집
• /
• 제9권2호
• /
• pp.99-106
• /
• 2001

NHTSA has been conducting biomechanical studies to reduce inujuries sustained sustained during automotive collision. Furthermore, NHTSA added the regulation to the FMVSS 201, limiting the equivalent HIC(Head Injury Criterion) value under 1000. In the presont work, a methodology was developed for the optimum design of the A-pillar trim with rib-structures. The design variables for the rib-strucrures were the transverse spacing, the longitudinal spacing, and the thickness. The required sets of the design varibles were decided based on the design of experiments. The head impact simulations were carried out using the LS-DYNA3D, and the HIC(d) values were computed using the resulrs of the head impact simulation. The objective function was constructed using the response surface methed (RSM). When the obtained optimum values were not inside the region of interest, the design proceduers were repeated by changing the region of interest. Finally, an A-pillar trim with rib-structures, which resulred in HIC(d) value under 850 for 15 mph head-trim impact, was developed.

• 한국소음진동공학회논문집
• /
• 제16권7호
• /
• pp.754-761
• /
• 2006

This paper presents the dynamic characteristics of MR impact damper for vehicle collision system. Various types of mechanism have been proposed to reduce force transmitted to the vehicle chassis and finally to protect occupants from injury. In the case of head-on collision, the bumper makes main role of isolation material for collision attenuation. In this study, the proposed bumper system consists of MR impact damper and structures. The MR impact damper utilizes MR fluid which has reversible properties with applied magnetic field. The MR fluid operates under flow mode. The bellows is used for generation of fluid flow. A mathematical model of the MR impact damper is derived incorporating with Bingham model of the MR fluid. Field dependent damping force is investigated with time and frequency domain. The MR impact damper is then incorporated with vehicle crash system. The governing equation of motion of vehicle model is formulated considering occupant model. Dynamic characteristics of vehicle collision system investigated with computer simulation.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.705-709
• /
• 2005

In this paper, we introduce fuzzy algorithm similar to human's way of thinking and designed collision detection system of vehicles. First, before the model vehicles design, we did simulation collision detection using PID and Fuzzy Controller. As a result, P.O that is Percent Overshoot when make use of PID controller happened from smallest 32% to 45%. But, In case of using fuzzy controller they produced about 10% in 7% in case use 25 rule. We designed model vehicles that introduce Auto Guided Vehicle(AGV) with confirmed result in simulation. We set Polaroid 6500 sensor on the front of model automobile because distinguish existence automobile to the head. And we composed motor drive part to run vehicles and 80C196KC processor for control movement of vehicles influenced on distance data of the front vehicles that receive from supersonic waves sensor. In case of using Fuzzy controller, last value percent error happened about maximum 15% in smallest 5%, and we confirmed that distance with front vehicles kept when state hold time is about maximum 16 seconds in smallest 10 seconds.

• 해양환경안전학회지
• /
• 제19권1호
• /
• pp.17-22
• /
• 2013

가까운 거리에서 상대선과의 마주치는 상황 또는 교차된 상황에서 상호 피항동작을 취하게 되는데, 상대선박의 변침의도를 정확히 파악하지 못해 서로 같은 방향으로 피항동작을 취함으로써 충돌위험에 처하게 되기도 한다. 항해사는 피항동작을 취함에 있어 시각에 의한 판단, 레이더 또는 AIS 벡터를 이용한 판단, 또는 VHF 통신을 활용하여 피항동작을 취하고 있으나, 레이더 및 AIS를 이용한 기존의 방식은 선박이 선회 후 선수방위가 표시되기 때문에 선회를 탐지하기까지는 상당한 시간이 요구된다. 따라서 조타기 작동 신호를 상대선박에 신속하게 전달하여 상대선의 선회의도를 보다 신속히 판단할 수 있는 선회조기감지 방안을 제안하였다. 이러한 방법은 상대선의 변침의도를 보다 신속하게 파악함으로써 선박 상호간 충돌예방에 효과적이며, VTS 시스템 및 해양사고 분석에서 활용이 가능하다.