• Journal of Trauma and Injury
• /
• 제19권1호
• /
• pp.8-13
• /
• 2006

Purpose: Traumatic head injury is very common in the emergency room. Early diagnosis and treatment can significantly reduce mortality and morbidity. When diagnosis is delayed, however, it could be critical to the patients. In reality, it is difficult to take a brain CT for all patients with head trauma, so this study examined the relationship between type and size of scalp injury and intracranial injury. Methods: This prospective study was conducted from May 2005 to July 2005. The participants were 193 patients who had had a brain CT. Head trauma included obvious external injury or was based on reports of witnesses to the accident. Children under three years of age were also included if there was a witness to the accident. The size of the injury was measured based on the maximum diameter. Results: Out of the total of 193 patients, patients with scalp bleeding totaled 126 (65.2%), and patients without scalp bleeding totaled 67 (34.8%). Among patients with scalp bleeding, patients with intracranial injuries numbered nine, and among patients without scalp bleeding, patients with intracranial injuries numbered 17 (P=0.001). Among patients who showed evidence of scalp swelling with no scalp bleeding, the relationship between the size of the scalp swelling and intracranial injury was statistically significant when the size of the scalp swelling was between 2 cm and 5 cm. Conclusion: Among patients who visit an emergency medical center due to traumatic head injury, patients with no scalp bleeding, but with scalp swelling between 2 cm and 5 cm, should undergone more accurate and careful examination, as well as as a brain CT.

• 대한가정학회지
• /
• 제42권6호
• /
• pp.103-110
• /
• 2004

Among accessaries, headwear is important to protect one's face and head from the sun, wind and cold. This study was performed to provide fundamental data on college female students' head shape by classifying their head shapes and by analyzing the characteristics of each head shape in order to improve the fitness of headwear. The subjects were 193 Korean college female students. The subjects were directly measured anthropometrically and indirectly analyzed photo-graphically. By direct and indirect measurement, 5 factors were extracted through factor analysis and those factors comprised 76.34% of the total variance. 3 clusters as their head shape were categorized using 5 factor scores by cluster analysis. Type 1 was characterized by long head type and having smallest head thickness and head girth. Type 2 had average size and the most round-head type. Type 3 was characterized by short head type and the largest head thickness and head girth.

• 설비공학논문집
• /
• 제28권7호
• /
• pp.269-274
• /
• 2016

This paper aims to suggest the water curtain installation guideline for prevention of fire spread. The water curtain systems play a role in preventing fire spread which is caused by fire flames and radiation heat release from a fire source. The radiation attenuation ratio is affected by the water droplet size, vertical distance from the nozzle and flow rate. This study suggests the water curtain installation guideline as follows : (1) Investigation of a reference store array (2) Calculation of the number of drencher heads (3) Review of the relationship between droplet size and attenuation factor depending on the height of the drencher head (4) Review of a drencher head array and spray overlapping. The reference traditional market in which a fire compartment is installed using a water curtain can be predicted to have a radiation attenuation ratio of 50%.

• 소성∙가공
• /
• 제15권1호
• /
• pp.21-26
• /
• 2006

A optical head unit for nano optical probe array was developed. The optical probe array is generated by Talbot effect. The shape and thickness of microlens array(MLA) were designed to minimize the spot size at the foci of MLA. To increase the optical efficiency of the system and obtain the large tolerance for fabrication, aperture size was theoretically optimized. Then microlens illuminated aperture array(MLIAA) as an optical head unit was fabricated using a ultra violet(UV) molding process on aluminum aperture array. In this process, Al aperture array was fabricated separately using the photolithography and reactive ion etching(RIE) process. Optical properties of the generated optical probes were measured and compared at Talbot distance from the aperture array having a diameter of $1{\mu}m$ and MLIAA.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.29-34
• /
• 2005

A optical head unit for nano optical probe away was developed. The optical probe array is generated by Talbot effect. The shape and thickness of microlens array(MLA) were designed to minimize the spot size at the foci of MLA. To increase the optical efficiency of the system and obtain the large tolerance for fabrication, aperture size was theoretically optimized. Then microlens illuminated aperture array(MLIAA) as an optical head unit was fabricated using a ultra violet(UV) molding process on aluminum aperture array. In this process, Al aperture array was fabricated separately using the photolithography and reactive ion etching(RIE) process. Optical properties of the generated optical probes were measured and compared at Talbot distance from the aperture array having a diameter of $1{\mu}m$ and MLIAA.

• 대한두경부종양학회지
• /
• 제23권2호
• /
• pp.138-141
• /
• 2007

Objectives : Well differentiated thyroid carcinoma(WDTC) has relatively good prognosis. But recurrence is associated with increased morbidity and mortality, and always results in reoperation. So it is important to evaluate the risk factors relative to the recurrence. The aim of this study is to evaluate the risk factors of recurrence. Materials and Method : Two hundred seventeen patients who had undergone thyroidectomy and proved as WDTC from January 1999 to December 2004 was included in the study. We reviewed patient-related and tumorrelated factors respectively and analyzed the correlation with tumor recurrence. Results : Fourteen patients from two hundreds seventeen had recurred. Recurrence rate was 6.5%, and average interval of recurrence was 28 month. Male, age over 45, multiple mass, and advanced TMN stage patient group show higher recurrence rate, but no statistical significance. However, the recurrence rate of lymph node metastasis, tumor size>1.5cm, and extracapsular invasion group were statistically high. Conclusion : Lymph node metastasis, tumor size and extracapsular invasion are significant risk factors related to the recurrence of WDTC.

• 물과 미래
• /
• 제29권1호
• /
• pp.213-220
• /
• 1996

본 연구는 siphon의 수리학적 현상을 이용하여 배수를 제어하는 Cherepnov 송수기의 효율적인 양정(유입수조의 수면과 송수관 출구의 위치차)을 결정하기 위한 실험적 연구이다. 본 송수기는 물 자체가 가지고 있는 위치에너지에 의하여 작동되어지며, 송수기의 구조는 상단 개구부를 갖는 1개의 수조와 밀폐된 2개의 수조, 5개의 관 그리고 2개의 역지변이 상호 연결되어 있다. 양정과 낙하고 비(H$$/H$$)의 변화에 대한 본 송수기의 수리학적 거동과 작동특성을 조사 연구하기 위하여 각 수조내의 수위와 압력변화를 측정하였으며, 송수기의 수조와 연결관의 직경이 송수기의 양정과 낙하고 비(H$$/H$$)에 미치는 영향을 분석하였다. 본 실험에 의하여 송수기의 효율을 높일 수 있는 효율적인 양정은 낙하고의 약 1/2배 정도이었다. 따라서 효율적인 Cherepnov 송수기를 제작하기 위하여는 낙하고를 양정의 2배정도로 설계해야 할 것으로 판단된다. 수조크기가 효율에 미치는 영향은 5% 이하인 반면 관의 크기가 효율에 미치는 영향은 관크기에 따라 증가되었다.

• 복식문화연구
• /
• 제25권5호
• /
• pp.670-681
• /
• 2017

Firefighting hoods protect the head, face, and neck areas of officials while they perform firefighting services. The purpose of this study is to investigate the head size of Korean firefighting officials in order to establish the dimensions necessary to construct firefighting hoods. A total of 98 male firefighting officials participated in this study and 11 body dimensions, necessary for the construction of firefighting hoods, were measured. The data collected from the firefighting officials were compared to the general adult male data from the Size Korea national anthropometric study. The heights, weights, head circumferences, head heights, and bitragion arcs of the firefighters were significantly larger than those of general adult males, which shows that firefighting officials generally have larger body and head sizes than general adult males. Based on the results of Pearson's correlation coefficients, head circumference and head height were judged to be the important measurements for the construction of the firefighting hoods. Thus, these two measurements were chosen as the basic dimensions of the cross tabulation analysis. As a result, head circumferences of 57.00~60.99cm and head heights of 23.00~25.99 cm were found to be important measurement ranges among the firefighters. This study is expected to be used as the basis for the creation of firefighting hoods that help to ensure the safe rescue activities for firefighting officials.

• 한국의류산업학회지
• /
• 제12권3호
• /
• pp.354-363
• /
• 2010

The purpose of this study was to provide some preliminary results on application of 3D scan data of head shapes to the hat design and pattern-making. This paper defined necessary measurement items and concepts in 3-dimensional images of head shapes. And also it presented the methodology to pattern-making of 6-piece crown hat based on 3D data. It used the data of Size Korea to pick up and choose a head shape model with the average head size of Korean women in their twenties. Main results were: 1. The 3D scan data of head shape was better than the 1 dimensional measurement data. Because I could establish a hat pattern-making theory by the 3D scan data of head. 2. The 3D scan data provided the basis for conceptualization of basic measurement points and items for a better fit of hats as well as the definition of the basic hat circumference. 3. This presented a methodology for analyzing out head shape by 3D scan data, and allowed the derivation of the basic hat circumference from the maximum head circumference. 4. As the 6-piece Crown cloche hat made by this method fitted the head shape model perfectly, this methodology could suggest potential applicability to various hat design.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권2호
• /
• pp.121-129
• /
• 2011

It is progressing as new advents and remarkable developments of mobile device every year. On the upper line reason, NAND FLASH large density memory demands which can be stored into portable devices have been dramatically increasing. Therefore, the cell size of the NAND Flash memory has been scaled down by merely 50% and has been doubling density each per year. [1] However, side effects have arisen the cell distribution and reliability characteristics related to coupling interference, channel disturbance, floating gate electron retention, write-erase cycling owing to shrinking around 20nm technology. Also, FLASH controller to manage shrink effect leads to speed and current issues. In this paper, It will be introduced to solve cycling, retention and fail bit problems of sub-deep micron shrink such as Virtual negative read used in moving read, randomization. The characteristics of retention, cycling and program performance have 3 K per 1 year and 12.7 MB/s respectively. And device size is 179.32 $mm^2$ (16.79 mm ${\times}$ 10.68 mm) in 3 metal 26 nm CMOS.