• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.6
• /
• pp.782-788
• /
• 2018

This paper proposes a novel method for the omnidirectional camera-based image rendering synchronization system using head mounted display. There are two main processes in the proposed system. The first one is rendering 360-degree images which are remotely photographed to head mounted display. This method is based on transmission control protocol/internet protocol(TCP/IP), and the sequential images are rapidly captured and transmitted to the server using TCP/IP protocol with the byte array data format. Then, the server collects the byte array data, and make them into images. Finally, the observer can see them while wearing head mounted display. The second process is displaying the specific region by detecting the user's head rotation. After extracting the user's head Euler angles from head mounted display's inertial measurement units sensor, the proposed system display the region based on these angles. In the experimental results, rendering the original image at the same resolution in a given network environment causes loss of frame rate, and rendering at the same frame rate results in loss of resolution. Therefore, it is necessary to select optimal parameters considering environmental requirements.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.261-264
• /
• 2006

This paper deal with development of dredging equipment that proper water head elimination method changing transitional dredging method. Numerical simulation and model test were accomplished for development of seabed sediment inhalation equipment using water head. Sediment elimination system by the difference of water head has been analysed by numerical method. Model test was achieved for inhalation equipment performance test using water head by primary design. Also sediment elimination system has designed and developed that doesn't occur secondary pollution phenomenon. To verify the numerical results are compared with experimental results.

• Korean Journal of Human Ecology
• /
• v.12 no.4
• /
• pp.571-578
• /
• 2003

The purpose of this research was to provide basic information for enhancing sizing suitability in terms of the need for appropriate fit in head gear. The method for this research was to survey about sizing system of head gear, basic measure part, repair service. The subject of this study were 15 head gear companies. The results of this research were as follows : 1. In the sex target analysis according to company type, most of fashion brand companies were producing woman's head gear. In case of the company to produce man's head gear, sizes appeared variously. On the other hand, the sports brand companies were producing unisex head gear and safety helmet companies were producing man's one. 2. The number of size of head gear manufacturing companies were under 3 sizing system. This means that the sizing system of current head gear manufacturing company isn't various. 3. While the measuring part using currently in the company was head girth, one to be considered necessary for manufacturing of head gear except the head girth was head height.

• The korean journal of orthodontics
• /
• v.16 no.1
• /
• pp.71-84
• /
• 1986

The purpose of this study was to analyze the effect of orthopedic forces on the craniofacial complex utilizing the three kinds of the head gear. (high pull head gear, straight pull head gear, cervical pull head gear) For this study, the teeth and alveolar bone and palate were reproduced from birefringent materials and other parts of craniofacial complex were coated with birefringent material on the model. The effect of orthopedic forces on the craniofacial complex was analyzed by photoelastic method using transmission polariscope and reflection polariscope. The results were as follows. 1. The cervical pull head gear had the greatest tipping effect on the maxillary molars and high pull head gear had the least tipping effect. 2. In areas stressed, the cervical pull head gear stressed the greatest degree. 3. Only cervical pull head gear produced stress at the zygomaticofrontal suture and the posterior region of palate. 4. The straight pull head gear and high pull head gear produced stress at just inferior to the anterior nasal spine. 5. The cervical pull head gear and straight pull head gear produced tensile stress at the fronto-maxillary suture. 6. The pterygoid plates of the sphenoid bone, the zygomatic arches, the junction of the maxilla with the lacrimal and ethmoid bone, and the maxillary molars were affected by three types of head gear.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.7
• /
• pp.267-274
• /
• 2018

This paper describes a head pose estimation method using PTZ(Pan-Tilt-Zoom) camera. When the external parameters of a camera is changed by rotation and translation, the estimated face pose for the same head also varies. In this paper, we propose a new method to estimate the head pose independently on varying the parameters of PTZ camera. The proposed method consists of 3 steps: face detection, feature extraction, and pose estimation. For each step, we respectively use MCT(Modified Census Transform) feature, the facial regression tree method, and the POSIT(Pose from Orthography and Scaling with ITeration) algorithm. The existing POSIT algorithm does not consider the rotation of a camera, but this paper improves the POSIT based on perspective projection in order to estimate the head pose robustly even when the external parameters of a camera are changed. Through experiments, we confirmed that RMSE(Root Mean Square Error) of the proposed method improve $0.6^{\circ}$ less then the conventional method.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.2
• /
• pp.37-44
• /
• 2019

The primary objective of this study is to develop a prototype of all-in-one attachment-based PHC pile head cutting robot that improves the conventional work in safety, productivity, and quality. For this, the following research works are conducted sequentially; 1)literature review, 2)development of an all-in-one attachment-based PHC pile head cutting robot prototype, 3)performance evaluation of each device, 4)economic analysis of an automated method. As a result, PHC pile cutting level sensing device, PHC pile cutting device, PHC pile handling device are developed. Futhermore, working process of an automated method is developed based on result of performance evaluation. According to the economic analysis result, the cost of the automated method was 21.37% less than that of the conventional method, and the economic efficiency was also superior(ROR 215.44%, Break-even Point 5.52month). It is expected that conclusions for future improvements are used in the development of the all-in-one attachment-based PHC pile head cutting robot to practical use.

• Korean Journal of Bronchoesophagology
• /
• v.13 no.1
• /
• pp.19-22
• /
• 2007

Background and Objectives: The Objective of this study was to compare the effectiveness of the needle aspiration method and the I&D method in the treatment of peritonsillar abscess. Materials and Methods: A prospective clinical study was performed on 83 patients. All the patients were hospitalized after random treatment with either I&D or needle aspiration alone, received the same intravenous antibiotic therapy. Among the 83 patients, 73 patients who could be observed for longer than 6 months and had not undergone a tonsillectomy during the follow-up period, were analyzed for treatment outcomes. Results: There was no statistically significant difference in the initial failure rate(p=0.572), the hospitalized days(p=0.956), the recurrence rate(p=0.531) for the needle aspiration(35 patients) and I&D groups(38 patients). But, The mean duration of fever were statistically different in the needle aspiration(1.51 hours) and I&D groups(3.05 hours) (p=0.031). Conclusion: Two methods are thought to be similar in effectiveness, except that duration of fever was longer in the I&D group than in the needle aspiration group. However, taking advantages of the needle aspiration method into consideration, the needle aspiration of peritonsillar abscess may be more appropriate than I&D as an initial method for peritonsillar abscess

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.179-186
• /
• 2009

In this paper, we propose a head detection method based on vertical and horizontal pixel histogram analysis in order to overcome drawbacks of the previous head detection approach using Haar-like feature-based face detection. In the proposed method, we create the vertical and horizontal foreground pixel histogram images from the background subtraction image, which represent the number of foreground pixels in the same vertical or horizontal position. Then we extract feature points of a head region by applying Harris corner detection method to the foreground pixel histogram images and by analyzing corner points. The proposal method shows robust head detection results even in the face image covering forelock by hairs or the back view image in which the previous approaches cannot detect the head regions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.179-183
• /
• 2006

Whiplash injuries of the neck are one of the most common injuries reported from automotive rear impacts. Whiplash injuries can be reduced by changing geometry of head restraint. Therefore, geometries of head restraint were evaluated according to the test procedures of the Korea New Car Assessment Program(KNCAP) to improve safety of head restraint. In this study, nine vehicle's head restraints were tested. As the test results, one head restraints is rated at "Marginal", three head restraints are rated at "Acceptable" level, and the last five head restraints are rated at "Good" level.

• Journal of Korea Multimedia Society
• /
• v.8 no.4
• /
• pp.492-501
• /
• 2005

In this paper, we proposed the new segmentation method of optic nerve head and optic cub to consider the depth of optic nerve head on stereo fundus image. We analyzed the error factor of stereo matching on stereo fundus image, and compensated them. For robust extraction of optic nerve head and optic cub, we proposed the modified active contour model to consider the 3D depth of optic nerve head. As experiment result to various stereo fundus images, we confirmed that proposed method can segment optic nerve head and optic cup effectively.